Fcs2 Power Twin Pg Black
Description
Fcs2 Power Twin Performance Glass Black
High area twin fin set designed to be pushed hard through turns.
Overview
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
- Designed in collaboration with Harley Ingleby for use on his asymmetric twin model.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
You may also like ...
-
Fcs2 Carver Glass Flex Quad Rear
Powerful, drawn-out turns. Excels on open face waves.
OVERVIEW
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and and draw out their turns.
- Two Quad Rear fins.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL - Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
FIN SIZE
SMALL (55Kg - 70Kg)
MEDIUM (65Kg - 80Kg)FIN SPECS: SMALL
Base: 3.86" / 98mm
Depth: 3.93" / 100mm
Area: 11.07"² / 7140mm²
Sweep: 33.2º
Foil: 50/50FIN SPECS: MEDIUM
Base: 4.14" / 105mm
Depth: 4.21" / 107mm
Area: 12.63"² / 8150mm²
Sweep: 33.2º
Foil: 50/50$59.00 -
Fcs2 Accelerator Neo Glass Medium Tri Fin Set
- Designed for a balance of speed, flow & response with added control.
- Oversized, all-round template with a fuller tip.
- Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal conditions
A wide range of conditions, particularly good in critical overhead waves
Board Types
Performance boards with the FCS II Fin System.Neo Glass
Neo Glass fins are precision molded using long strand fiberglass and a marine grade polymer. Very affordable yet considered a premium construction due to its high fiberglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.39" / 111mm
Depth: 4.58" / 116mm
Area: 15.28"2 / 98600mm2
Sweep: 33.7o
Foil: Flat$119.00 -
Fcs2 Connect Quad Rear/side Fins Black
Side byte set designed for 2+1 setups on longboards and SUP's.
Overview
- Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up.
- Neutral, well balanced template.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP's or as shortboard quad rears.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
$59.95 -
FCS 2 AM Twin +1 Performance Core Extra Large
Al Merrick Twin fin with mini stabiliser. Lowest area twin set in the FCS range.
Overview
- Lowest area twin set in the FCS range.
- The low sweep (rake) and narrow tip means these fins pivot and release exceptionally well, while maintaining incredible trim speed and the ability to quickly break into a turn.
- Mini stabiliser has a narrow, elongated template with a rounded tip to add control when driving through turns.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
$209.00 -
FCS II Filipe Toledo Tri Fins
Filipe's new design for Summer 21/22 has dropped!
Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.
Overview
- Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
- Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
- Updated PC construction featuring ultralight AirCore.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
$229.00 -
-
-
Fcs2 Julian Wilson Tri Fins - Army Camo
Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.Overview
- Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
- Updated in PC construction featuring our ultralight AirCore.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.GROM/X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$189.00 -
FCS II Al Merrick PC Tri-Quad Fin Set - Yellow
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
- Al Merrick's template is designed for radical, progressive surfing.
- The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
- Tri/Quad (5 fin) set
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$319.00 -
FCS II Performer Performance Core Tri Fin Set - Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85KgFin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.13 104.8 4.3 109.3 13.26 8554 33.7° IFT SML 4.25 108 4.43 112 14.03 9054 33.7° IFT MED 4.37 111 4.55 115 14.81 9554 33.7° IFT LRG 4.48 113.7 4.67 118 15.58 10054 33.7° IFT XL 4.59 117 4.78 121 16.36 10554 33.7° IFT $179.95 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95 -
FCS II Accelerator PC Tri Fin Set
Speed, flow and response with added control. Excels in critical conditions.
Overview
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.39 111.5 4.58 116.3 15.28 9860 33.7 Flat LRG 4.50 114.3 4.70 119.2 16.06 10360 33.7° Flat $179.00
