Worn Wear Field Repair Kit - shown with UltraLite Hip Pack [not included]
Patagonia Worn Wear Field Repair Kit
Description
Patagonia Worn Wear Field Repair Kit
With all the necessities for simple repairs, the Worn Wear™ Field Repair Kit is small enough to fit in a wallet yet capable enough to salvage that weekend trip from a singed sleeping bag or a torn jacket. Fair Trade Certified™ sewn.
- Sized Right
Slim, credit card-sized holder tucks into a pocket or a wallet to keep repair supplies close at hand - Kit Contents
Kit includes two sewing needles, polyester thread and gear tape; with room to add a few more needles, safety pins, more tape or other items, depending on what you need to keep you moving - DIY Wallet
Wrap with a rubber band to create the ultimate trail wallet - Recycled Materials
Built of 100% recycled polyester with a TPU coating--the same fabric used in Black Hole® bags - Supporting the People Who Made This Product
Fair Trade Certified™ sewn, which means the people who made it earned a premium for their labour - Country Of Origin - Made in Vietnam
- Weight - 8.5 g (0.3 oz)
- Materials
14-oz 900-denier 100% postconsumer recycled polyester ripstop with a TPU-film laminate
Fabric is certified as bluesign® approved
Fair Trade Certified™ sewn
You may also like ...
-
Ding All Fibreglass Cloth - 2.7m
Ding All Fiberglass Cloth can be laminated with Polyester and Epoxy Resin to add uniform strength and shape to Surfboard Boards and beyond!Ding All Fiberglass cloth is lightweight and has a high strength to weight ratio. It can also be layered with resin to reinforce repairs. Our Fiberglass cloth packs contain "E-Glass", the industry standard for surfboard repairs or construction. E-Glass is very strong and easy to apply with resin.- The cloth wets out super clear and transparent allowing any colors or graphics beneath to show through once it has hardened
- Ding All Fiberglass Cloth is highly pliable, allowing it to conform on curved surfaces of the surfboard
- Variety of applications: It can be used for tubs, showers, sinks, pools, hot tubs, boat repairs, and more!
- 2.7m x 68 cm
$39.00 -
FCS All-Tech Repair Putty
- Instantly repairs small dings to get you back in the water in no time.
- The putty is activated by a kneading motion and can be surfed while the putty is curing, no sun required.
- 60 grams, storage tube included mix it, fix it, surf it instructions included
$25.00 - Instantly repairs small dings to get you back in the water in no time.
-
The Cannonball removes old wax and dirt build up from your surfboard without chemicals, and comes with a free Wax Comb and Sticker.
Is the Cannon Ball Wax Remover as good as the Pickle and what does it come with?
Yes, Phix Doctor’s Cannon Ball Wax Remover is actually about 10% bigger than the Pickle so it can Blast about 10% more wax and dirt off of your board! The Cannon Ball comes with a FREE Wax Comb and Logo Sticker.What is the Cannon Ball Wax Remover made of and does it work well?
The Cannon Ball Wax Remover is filled with processed material that has been discarded after shaping a surfboard. Phix Doctor processes this waste material into a super effective wax and dirt blasting Cannon Ball.$25.00 -
Phix Doctor SunPowered Super Mini Dura Resin Fiberfill Kit 1 oz/29.5ml
The Super Mini Dura Resin repair kit works for all board types that do not require mixing, fiberfilled, quick repair.
Dura Rez cures in full sun in less than 3 minutes for a professional finish that saves you time and money! Ultra Clear, SunPowered, Fiber Filled Dura Rez Works on Epoxy and Polyester, will not harm the foam core, and NEVER hardens in the tube.
Non-yellowing SunPowered resin that sets up fast and nearly showroom perfect when the clear cover sheets are used to contour and magnify the suns effect on this premium resin.
Dura Rez- Safe for Epoxy and Polyester
- Non-Yellowing Resin
- Fiber Filled
- Super Fast 3 Minute Cure
- Endless Shelf Life
Kit includes:
1 fl oz Tube of Dura Resin
Dual Grit Sand Pad
2 Mix Sticks
2 Smoothy Sheets$25.00 -
Enough Professional Grade SunPowered Resin to Fix 10 Average Dings and 1 on the go Dry Lock Marine Grade Ding Tape.
Airline Approved, Endless Shelf Life!Features.
• 1 Tube Universal, SunPowered, Fiber-Filled Resin
• 2″x3″ Marine Grade Ding Tape
• Dual Grit, Wet Dry Sand Pad
• Clear Cover Sheets
• Logo Sticker
• Applicator Stick$15.00 -
The Quick Fix Putty is designed for repairing epoxy and polyester boards. Recommended for SurfTech, BIC, NSP, and solid colored SUP boards.
The kit include:- Putty
- Gloves
- Wet/dry sandpaper
- Wooden applicator
- Instructions, sticker and product insert
$29.00 -
Phix Doctor SunPowered Mondo Dura Resin Fiberfill Tube 2 oz/59ml
Dura Resin Fiberfill Tube
Finally… One Ultra Clear and Strong Resin that’s Safe for all Surf Boards… Dura Resin by Phix Doctor!1 MINUTE CURE – SunPowered, Fiber-filled Dura Resin Includes a Dual Grit Sand Pad and Smoothy Sheets. Safe For Epoxy and Poly Boards. The Super Mini is Airline Approved and Delivers Fast, Pro Finish, Permanent Results with Endless Shelf Life Guaranteed!
KIT INCLUDES:
2 FL OZ TUBE OF DURA RESIN
60/220 DUAL GRIT SAND PAD
3 MIX STICKS
2 SMOOTHY SHEETS$30.00 -
Sponge Rez Body Board Repair 60ml
Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges. Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores. Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.
General Directions:
- Surface should be clean, dry, and free of dirt, and or wax.
- Use in well ventilated area, preferably outdoors. DO NOT deliberatley inhale vapors – don’t be stupid.
- Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damged part of the board. Do not apply Sponge-Rez with your fingers.
- Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.
$39.00 -
Solarez Epoxy Ding Repair Kit 30 Ml
Wh
It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding.
UV-CURE (for superficial dings less than 1/4″ deep)
- Apply in the shade.
- For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board.
- Expose to sunlight for 3 minutes
- Peel off plastic wrap and touch-up sand.
$34.00 -
Patagonia Worn Wear Patch Kit
In the backcountry or the backyard, you can easily repair tears in tents, sleeping bags and jackets with our Worn Wear™ Patch Kit. It includes four sheets of Tenacious Tape® patches, known for their strong adhesive strength. Whimsical designs make every rip an amusing story. Made in a Fair Trade Certified™ factory.
Specs & Features
- Kit Contents
Kit includes four 3" x 5" sheets of black Tenacious Tape® patches with varying sizes and shapes for fixing gear - Simple Repairs
Simple peel-and-stick application, no sewing required; patches are washable just 24 hours after application - Adhesive Forms Permanent Bond
Ultra-strong adhesive permanently bonds to outdoor fabrics and materials, including nylon, vinyl, rubber and plastic - Supporting the People Who Made This Product
Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labour - Country of Origin
Made in Taiwan - Weight
26 g
$34.00 -
FCS Simple Patch Repair
Designed for instant, tool-free application, guaranteeing a permanent, waterproof finish and a smooth surface without the need for sanding. Resin Infused Fibreglass pathc for all EPS and Epoxy Boards.
SimplePatch is a revolutionary resin-infused 3oz fibreglass patch that can be easily applied to create a smooth finished, waterproof, high-strength permanent repair in minutes. No more mixing resins, no more sticky fingers, and no more endless sanding to get smooth, just simply peel and stick!
Select either PU or Epoxy version to suit your board.Features
- Fast to apply anywhere with no tools
- Provides a permanent repair
- Makes the board waterproof again
- Has a smooth surface finish without sanding
- Available in two sizes: Regular (69mm x 37mm) and Large (98mm x 60mm)
$15.00 -
FCS Simple Patch Repair
Designed for instant, tool-free application, guaranteeing a permanent, waterproof finish and a smooth surface without the need for sanding. Resin Infused Fibreglass pathc for all EPS and Epoxy Boards.
SimplePatch is a revolutionary resin-infused 3oz fibreglass patch that can be easily applied to create a smooth finished, waterproof, high-strength permanent repair in minutes. No more mixing resins, no more sticky fingers, and no more endless sanding to get smooth, just simply peel and stick!
Select either PU or Epoxy version to suit your board.Features
- Fast to apply anywhere with no tools
- Provides a permanent repair
- Makes the board waterproof again
- Has a smooth surface finish without sanding
- Available in two sizes: Regular (69mm x 37mm) and Large (98mm x 60mm)
$15.00
