Solarez Epoxy Small .5oz

Ding All Fibreglass Cloth - 2.7m

Ding All Fiberglass Cloth can be laminated with Polyester and Epoxy Resin to add uniform strength and shape to Surfboard Boards and beyond!

Ding All Fiberglass cloth is lightweight and has a high strength to weight ratio. It can also be layered with resin to reinforce repairs. Our Fiberglass cloth packs contain "E-Glass", the industry standard for surfboard repairs or construction. E-Glass is very strong and easy to apply with resin.

The cloth wets out super clear and transparent allowing any colors or graphics beneath to show through once it has hardened

Ding All Fiberglass Cloth is highly pliable, allowing it to conform on curved surfaces of the surfboard

Variety of applications: It can be used for tubs, showers, sinks, pools, hot tubs, boat repairs, and more!
2.7m x 68 cm

$39.00

Buy Now

Add to Favourites

Solarez Epoxy Small .5oz

$20.00

Buy Now

Add to Favourites

Phix Dr. Polyester Kit Lrg

NO SUN/UV CURE, USES CATALYST (Included)

Phix Doctor use ultra fresh Silmar brand Polyester resin and the highest quality products.

Will this repair kit work for my epoxy board?
No, polyester resin is not compatible with styrofoam core boards. We advise to never allow this resin to be in contact with styrofoam (EPS) cores.

$40.00

Buy Now

Add to Favourites

Solarez Epoxy 30ml/1oz

SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.

No mixing necessary. UV curing assures complete hardening.
Provides complete crosslinking
Remarkably tough and resilient
Contains urethanes that keep from yellowing
Eco-freindly ZERO vapors, non-flammable.
Comes with 60/240 grit sand pad.

$35.00

Buy Now

Add to Favourites

Phix Dr. Epoxy Dura Rezin Tube 2oz

Phix Doctor SunPowered Mondo Dura Resin Fiberfill Tube 2 oz/59ml

Dura Resin Fiberfill Tube
Finally… One Ultra Clear and Strong Resin that’s Safe for all Surf Boards… Dura Resin by Phix Doctor!

1 MINUTE CURE – SunPowered, Fiber-filled Dura Resin Includes a Dual Grit Sand Pad and Smoothy Sheets. Safe For Epoxy and Poly Boards. The Super Mini is Airline Approved and Delivers Fast, Pro Finish, Permanent Results with Endless Shelf Life Guaranteed!

KIT INCLUDES:
2 FL OZ TUBE OF DURA RESIN
60/220 DUAL GRIT SAND PAD
3 MIX STICKS
2 SMOOTHY SHEETS

$30.00

Buy Now

Add to Favourites

Sponge Rez Body Board Repair 15ml

Sponge Rez Body Board Repair 15ml

Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges.

Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores.

Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.

General Directions:

Surface should be clean, dry, and free of dirt, and or wax.
Use in well ventilated area, preferably outdoors. DO NOT deliberately inhale vapours – don’t be stupid.
Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damaged part of the board. Do not apply Sponge-Rez with your fingers.
Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.

$16.00

Buy Now

Add to Favourites

Solarez Epoxy Microlite Ding Repair 30ml

Solarez Epoxy Ding Repair Kit 30 Ml

Wh

It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding.

UV-CURE (for superficial dings less than 1/4″ deep)

Apply in the shade.
For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board.
Expose to sunlight for 3 minutes
Peel off plastic wrap and touch-up sand.

$34.00

Buy Now

Add to Favourites

Phix Doctor Bodyboard Repair Kit 1fl Oz

Phix Doctor - Bodyboard Weld and Seal Repair Kit - 1 oz/29ml

NEW Bodyboard Repair Kit – Soft Phix Crystal Clear Bodyboard repair.

Soft Phix bonds to styrofoam (EPS), EVA, HDPE, Rubber, Wood, Metal, and much more!

Bodyboard Weld & Seal Repair Kit – Finally a single application resin designed to protect your board from the tough elements of land and sea. Keep your boards in top running condition with this ultra clear, uv resistant, super flexible waterproof polymer that bonds well to all softboard inner and outer materials including EPS (styrofoam cores) HDPE (slick bottoms), Arcel, PP, PE and much more. This super flexible, UV resistant resin fills deep holes, delaminations, rips, split seams, loose leash plugs, bodyboard fins, wetsuits, dive masks and more! Super easy to apply, with medium strength curing in 24 hours, full cure in 48 hours.

Durable
Crystal Clear
Super Flexible
Waterproof
Bonds well to Styrofoam/EPS, EVA, HDPE, Rubber, Wood, Metal and more.
Easy To Use

$30.00

Buy Now

Add to Favourites

Phix Doctor Softboard Repair Kit 1fl Oz

Phix Doctor Soft Phix Softboard Repair Kit - 1 oz/29ml

Introducing NEW Softboard Repair Kit – Soft Phix crystal clear softboard repair.

Soft Phix bonds to styrofoam (EPS), EVA, HDPE, Rubber, Wood, Metal, and much more!

Soft Phix Softboard Repair – Finally a single application resin designed to protect your board from the tough elements of land and sea. Keep your boards in top running condition with this ultra clear, uv resistant, super flexible waterproof polymer that bonds well to all softboard inner and outer materials including EPS (styrofoam cores) HDPE (slick bottoms), Arcel, PP, PE and much more. This super flexible, UV resistant resin fills deep holes, delaminations, rips, split seams, loose leash plugs, bodyboard fins, wetsuits, dive masks and more! Super easy to apply, with medium strength curing in 24 hours, full cure in 48 hours.