- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- Fcs2 Performer Glass Flex Tri
Fcs2 Performer Glass Flex Tri
Fcs2 Performer Glass Flex Tri
Reliable all-round fin for a diverse range of surfers, conditions and board types.
Well proportioned template with Inside Foil Technology (IFT) delivering a balance of drive, pivot and hold.
Designed for surfers wanting a combination of speed and maneuverability with flow between turn
Ideal Conditions.
A wide range of conditions from beach breaks to point breaks.
Board Types.
Recommended for all board types.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
Fin Specs.
Base: 4.25" / 108mm
Depth: 4.43" / 112mm
Area: 14.03"2 / 9054mm2
Sweep: 33.7o
Foil: Inside
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg
BASE ” | BASE MM | DEPTH ” | DEPTH MM | AREA ” | AREA MM | SWEEP DEGREE | FOIL | |
Performer X-S | 4.13 | 105 | 4.3 | 109 | 13.26 | 8554 | 33.7 | IFT |
Performer SML | 4.25 | 108 | 4.43 | 112 | 14.03 | 9054 | 33.7 | IFT |
Performer MED | 4.37 | 111 | 4.55 | 115 | 14.81 | 9554 | 33.7 | IFT |
Performer LRG | 4.48 | 114 | 4.67 | 118 | 15.58 | 10054 | 33.7 | IFT |
Performer X-LGE | 4.59 | 117 | 4.78 | 121 | 16.36 | 10554 | 33.7 | IFT |
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Fcs2 Carver Performance Core Tri- Medium
Elongated fin for performing long arc turns.
High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"2 / 9650mm2
Sweep: 37.0
Foil: Flat$159.00 -
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad (4 fin) setup.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$259.00 -
Powerful, drawn-out turns. Excels on open face waves.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$199.00 -
Overview
- Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
- Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
- This fin provides maximum drive and control.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$209.95 -
Fcs2 Carver Perfomance Glass Quad Side Small
Side byte set designed for 2+1 setups on longboards and SUP's.
- Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up.
- Neutral, well balanced template.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP's or as shortboard quad rears.
$129.00 -
FCS II Accelerator Neo Glass Eco Tri Fins
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.
$119.00 -
FCS II Filipe Toledo Tri Fins
Filipe's new design for Summer 21/22 has dropped!
Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.
Overview
- Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
- Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
- Updated PC construction featuring ultralight AirCore.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
$229.00 -
Fcs2 Mark Richards Tri Fins - Black White Swirl
NEW SEASON COLOURS
MR's twin + stabiliser template. Exceptional pivot off the top, while centre fin adds control.
Overview
- Mark Richard's famous twin template produces exceptional drive and speed.
- The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
$209.00 -
Fcs2 Julian Wilson Tri Fins - Army Camo
Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.Overview
- Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
- Updated in PC construction featuring our ultralight AirCore.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.GROM/X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$189.00 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95 -
FCS II Sharpeye PC Medium Tri Fins
Marcio Zouvi's 'Sharp Eye' shaper fin.
Overview
Marcio Zouvi's 'Sharp Eye' shaper fin. A versatile all-round Performance Core fin with a larger base, ideal for controlled power turns in critical sections.
- Developed in conjunction with Marcio Zouvi from Sharp Eye Surfboards.
- High Performance fin with a larger base, maintains lots of drive with plenty of release off the lip
- Controlled high-speed turns in punchy conditions.
- Suited to performance and hybrid shortboards.
Sharpeye
Beginning his shaping career in the 80's, Marcio Zouvi and his crew have designed board templates for the highest-performing surfers on tour. With a large focus on premium shortboard designs and progressive surfing in mind, Sharp Eye surfboards have become the board of choice for CT surfers like Filipe Toledo, Barron Mamiya and Sally Fitz.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
- Performs well in punchy conditions.
Board Types
- Designed to fit the FCS II Fin System.
- For all board types. Best suited to performance and hybrid shortboards.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)$199.00