- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- FCS II Al Merrick PC Tri-Quad Fin Set - Cobalt
FCS II Al Merrick PC Tri-Quad Fin Set - Cobalt
FCS II Al Merrick PC Tri-Quad Fin Set - Cobalt
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
Tri/Quad (5 fin) se
Ideal Conditions
Hollow steep waves, punchy beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Fcs2 Carver Performance Glass Quad Size - Small
Powerful, drawn-out turns. Excels on open face waves.
OVERVIEW
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and and draw out their turns.
- Two Quad Rear fins.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL
PERFORMANCE GLASS
Fin Specs
Base: 3.86 in. 98 mm
Depth: 3.93 in. 100 mm
Area: 11.07 in.² 7140mm²
Sweep: 33.2º
Foil: 50/50$129.00 -
Julian Wilson's updated signature fin. Speed and projection for taking flight and progressive surfing.
OVERVIEW
Made from super responsive Performance Glass material, Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS 2 Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL
PERFORMANCE GLASS
FIN SIZE
GROM (Blue Stripe)
Base: 4.10" / 104mm
Depth: 4.19" / 107mm
Area: 12.81"² / 8264 mm²
Sweep: 35.8°
Foil - Side Fins: 80/20
Foil - Centre Fin: 5/50Was:$199.00Now:$100.00Price:$100.00 -
Powerful, drawn-out turns. Excels on open face waves.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$199.00 -
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$89.00 -
Fcs2 Carver Neo Glass Small Quad Side
Powerful, drawn-out turns. Excels on open face waves.
OVERVIEW
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and and draw out their turns.
- Two Quad Rear fins.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL
Neo Glass
Neo Glass fins are precision molded using long strand fiberglass and a marine grade polymer. Very affordable yet considered a premium construction due to its high fiberglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
Fin Specs
Base: 3.86 in. 98 mm
Depth: 3.93 in. 100 mm
Area: 11.07 in.² 7140mm²
Sweep: 33.2º
Foil: 50/50$89.00 -
FCS II Accelerator Neo Glass Eco Tri Fins
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.
$119.00 -
FCS II Filipe Toledo Tri Fins
Filipe's new design for Summer 21/22 has dropped!
Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.
Overview
- Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
- Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
- Updated PC construction featuring ultralight AirCore.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
$229.00 -
Fcs2 JS Modern Keel
The flow of a traditional twin fish with the control of a performance quad.
The JS Modern Keel is an upright keel template designed for the JS Red Baron and other specialty fish shapes. Featuring a wide base and a relatively small sweep (rake), this high area keel provides control through the face and pivot in a tight radius.
Overview
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
- Black & White in Performance Glass
Board Types
- JS Red Baron - The Red Baron, part of the Baron family, has a shorter and wider template with plenty of volume in the tail. It's tail width allows for speed generation through flatter sections as well as a deep double concave, this board was made with the JS Modern Keel template in mind.
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$199.00 -
Fcs2 JS Power Twin Fin
High area twin fin set designed to be pushed hard through turns
Overview
- Limited Edition fin designed to compliment the JS Industries Black Baron Twin.
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$189.00 -
FCS II Mid Side Byte Fin Set - Clear
You committed to riding a midlength, so it makes sense to maximise the performance of the board by using a set of fins that allows you to perform to your full potential.
Overview
The 3.6" side bytes are derived from the historic GL template from the late '90s. This template has withstood the test of time and compliments the single by adding response and control when turning.
Surfers wanting a versatile and stable 2 + Box set for their midlength that will encourage smooth flow without restricting manoeuvrability and tighter turns performed higher on the wave.
- Side byte template for Midlengths
- PG Material
Neo Glass
Neo Glass fins are precision moulded using long-strand fibreglass and a marine-grade polymer. Very affordable yet considered a premium construction due to its high fibreglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
3.6" 3.4 87.1 3.6 92 9.3 5990 28.6° Flat View the FCS Fin Data page for Base/Depth/Area/Foil information.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP or as shortboard quad rears.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$119.95 -
FCS II Gerry Lopez Tri-Quad Fin Set
Through his numerous experiences surfing heavy waves on the North Shore, Gerry Lopez's new upright template provides speed and control through hollow powerful waves.
Gerry Lopez, AKA Mr. Pipeline, showed what was possible on the infamous North Shore wave, adopting a relaxed stance while disappearing inside the hollow wave. His new fin template feels stable yet loose enough to turn smooth and easy. Ideal for bigger hybrid models these are the perfect fins for hollow powerful waves.
- Available in Medium Tri and Tri-Quad Sets.
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance hybrid models with deep concaves and moderate-to-extreme rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.21 107.0 4.21 119.7 14.84 9572 31.1° Flat Q-Rear 3.77 95.8 3.74 95.2 9.38 6054 31.4° Flat $309.00 -
FCS II HS "Hayden Shapes" PC Carbon Medium Tri Quad Set
Haydenshapes 'HS' shaper fin. An all round template with longer base for exceptional speed when driving off the bottom.
Overview
- FCS II Tri-Quad (5 fin) Shaper Fin designed by Hayden Cox from Hayden Shapes.
- Perfectly suited to the HS Hypto Krypto and other higher volume board models with lower rocker.
- This fin produces exceptional speed when driving off the bottom, especially on longer open face waves.
Ideal Conditions
- A wide range of conditions, and waves.
Board Types
- Designed to fit the FCS II Fin System.
- Perfectly suited to the HS Hypto Krypto and other higher volume board models with lower rocker
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$329.00