XCEL INFINITI BOOT 3mm
Xcel 3mm Infiniti Boots
- Thermospan 3mm lined upper boot for warmth
- Nylon-2 lined sole for traction
- Flex horizontal heel support
- Ultra Stretch ankle panel w/ pull loop for easy on & off
- Sole at split toe is solid so no leash hang-ups
- Heel and toe support
- Velcro cinch across instep
- Glued and blind stitched construction
- Taped seams
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Protective, lightweight reefwalkers great for use in all wet domains. Featuring mesh water flow panels these quick drying shoes are great for beach / reef walking. *Mens footwear sizing.
$29.00 -
The Defender 3mm boot is the remedy for Keeping the Cold Out. Ultraflex DS neoprene, Anti-Flush Shin Strap and PolerFlex liner all rolled into a durable and reliable winter asset.
- UltraFlex DS Neoprene
- GBS + Taped Seams
- PolarFlex Liner
- Defender Series
- Anti-Flush Shin Strap
- Durable Outsole
- 3mm
$89.00 -
Better than Barefoot
Our Custom Pro Series has no equal in the world of aquatic footwear. Every material and design detail has been painstakingly researched, tested, refined, and perfected to yield a boot so good you'll forget you are wearing it.
The Custom Pro is anchored by our patented Full Wrap arch strap, which locks your foot into the boot to insure zero delay between foot movement and board response. Combined with the precision fit of our custom heat-molding process, the Custom Pro provides barefoot feel and response for every possible foot shape: high or low arch, narrow or wide width, high or low volume.
Updates to the 2020 Custom Pro include:
- Wider opening and removed internal tape at the O-Ring cuff improves stretch to make the boot easier to get on/off while still resisting water entry.
- 3D Hollow Fiber neoprene lining material improves air flow for increased warmth.
Recommended Water Temps: 40-50F.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. Women should order 1-1.5 sizes lower to convert from Men's sizing. So if you are a Women's 8, order a Men's 7. If you are a Women's 8.5, also order a Men's 7. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
Key Features:
- Heat-moldable for the perfect custom fit.
- Patented seamless Thermo-Form sole for next-level comfort, warmth, dexterity, and durability.
- Internal split-toe locks your foot inside the boot for precise response.
- Super-tacky and flexible 1mm vulcanized rubber sole pods for barefoot board feel, grip, and abrasion resistance.
- 6mm neoprene upper with quad-sealed seams: GBS (Glue/Blind-Stitch), IST (Internal Stretch Tape), External LSS (Liquid Seam Seal).
- Patented full-wrap ankle strap co-molded into the sole improves durability.
- Tatex-coated hook strap improves durability and holding power.
- Tatex heel spine and laminated heel-pull for durability and easy on.
- New Hollow Fiber 3D quick-dry lining increases airflow for greater warmth.
- Double-lined 4mm O-ring cuff seal provides a durable, seamless barrier against flushing with lower bulk.
- Includes a pair of knit Solite Heat Booster socks for added warmth, comfort, and easy on/off.
$165.00 -
Rip Curl Flashbomb Hidden Split Toe Bootie 3mm
The Flashbomb 3mm Hidden Split Toe Booties were made to withstand the coldest water winters, keeping you warmer in the water longer. These booties were constructed with our signature Flash Lining technology for warmth, flexibility and fast dry times. Finished with the SOS Entry System, Super Thin Sole with textured grip, new E5 Tape and a stitchless compression strap - all with a durable rubberized outsole structure.
- Ankle and foot strap
- Slide on easy S.O.S. system
- Textured grip print
- Anti-stink treated
- Seam sealed
$119.00 - Ankle and foot strap
-
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom integrates our 2.0 Sole in the cleanest, simplest package that essentially disappears on your feet. If you want the world's lightest, barely-there boot, the 3mm Custom 2.0 is your answer. Check the tech:
3D-Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
Upgraded Neoprene Lining with Tatex Flex-Spine and Plush Interior
Updates to the Custom 2.0 aren't limited to the sole. We've also upgraded the outer lining material to the same one we use on the Custom Pros, improving durability and minimizing water absorption. Further fortifying the exterior is our exclusive Tatex Flex Spine. The Flex Spine stiffens the back of the boot to act as a shoe-horn and also provides a sticky surface to grab your wetsuit leg and prevent flushing. The inside is lined with a plush quick-dry lining material for max airflow, improving warmth and comfort.
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with Liquid Seam Seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
- Makes boots easier on-off and reduces stress on seams.
- Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
- Adds warmth to extend session length and comfort.
- Absorbs excess water from flushing to prevent puddling in the boots.
- Absorbs bacteria to reduce bootie-stink.
- Machine wash and dry for convenience.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
$129.00 -
Rip Curl Flashbomb Hiddden Split Toe 5mm Booties
The Rip Curl Flashbomb 5mm Hidden Split Toe Booties are lifesavers when winter and cold water hits. Featuring a 0.6mm sole with textured grip, ultra flexible soft soles, you'll feel more dialled in than ever.
Designed with sealed seams to keep water out, detailed with Flash Lining interior that dries rapidly. These boots are made for surfing, no matter how harsh the conditions.
Features:
- Flash Lining
- 0.6mm thin rubber sole
- Ankle and foot strap
- Slide on easy S.O.S system
- Textured grip print
- Anti-stink treated
- Seam sealed
$139.00 - Flash Lining
-
Billabong Furnace Hidden Split Toe Wetsuit Boots 3mm - Black Clay
Sustainable style meets performance-enhancing innovation in the Billabong 3mm Furnace Wetsuit Boots. Featuring premium, lightweight neoprene designed to keep you warm and boost mobility, these men’s wetsuit boots are made with recycled Airlite stretch and our exclusive Furnace Graphene for a stretchy, comfortable feel throughout. Designed with a hidden split toe for a barefoot fit.
Features:
Men’s Wetsuit Boots.
3mm.
- Neoprene Foam Type: Smart Foam, partially recycled and premium lightweight
- Exterior Fabric Type: Airlite Recycler stretch now made from 100% recycled fibres
- Interior Fabric Type: Graphene Recycler Plus
- Hidden split toe neoprene boot
Materials:
80% Neoprene, 10% Nylon, 10% Polyester$109.00 -
Ultimate surf reef boot with split toe. Also the favourite bootie for dinghy sailors and windsurfers.
Features.
Split Toe.
Heel Cinch.$89.00 -
O'Neill Hyperfreak Ninja 3mm Split Toe Wetsuit Boot - Black
Lightweight warmth, sensitivity of board feel under foot, grippy, TB3X comfort upper, durable supportive lower and heel- TB3-X /Durable Krypto Forefoot
- Glued & Blind Stitched Seams
- Anatomical Fit
- Anti-Flush Shin Strap
- Lightweight Sole
- 3mm
- Sizes 5 -13
- O'Neill Hyperfreak Series
$89.00 - TB3-X /Durable Krypto Forefoot
-
O'Neill Defender Split Toe 3mm Wetsuit Boot - Black
The O'Neill Defender 3mm boot is the remedy for Keeping the Cold Out. Ultraflex DS neoprene, Anti-Flush Shin Strap and PolarFlex liner all rolled into a durable and reliable winter asset.- UltraFlex DS Neoprene
- Glued Blind Stitched + Taped Seams
- Durable Outsole
- Anti-Flush Shin Strap
- 3mm
- PolarFlex Liner
- Sizes 5-14
$99.00 - UltraFlex DS Neoprene