O'Neill Defender Chest Zip 3/2 Gunmetal/Navy

O’Neill is the O’Riginal wetsuit brand. Since Jack O’Neill invented the original wetsuit in 1952, O’Neill has been responsible for 90% of original wetsuit design… that’s a fact!

Check out O’Neill’s Defender collection of wetsuits. This series features durable wetsuits, surf boots & more.

With a thermal liner that makes it feel like summer on the inside, the O’Neill Defender wetsuit keeps the water out, the heat in and ensures you are toasty at all times. An all-round performer, fully flexible, comfortable, durable and incredible value for money.

Features

• UltraFlex DS with Polarflex Firewall - High performance super-stretch neoprene with a durable outer skin that resists Velcro pulls and snags. Stretch factor :150% . Polarflex firewall through the chest and arms with Ultrafibre liner in arms and legs.
  
  
• GBS + 50% Taped Seams - Glued and blindstitched for durable, watertight seals, O’Neill’s  Defender’s core ¾ of seam are taped to further enhance seam integrity and comfort
  
  
• UltraFibre Liner - Interior thermal lining traps and enhances body heat to keep the cold out and the warmth in

• Chest Zip – The O’Neill FUZE chest zip uses a free-floating zipper panel and anti-fllush barrier with drain holes to keep you dry and feeling loose

• Meshskin Back Panel - Single line mesh skin neoprene that prevents wind chill and keeps the vitals warm
  
  
• Single Seal Collar - Single neoprene collar
  
  
• Krypto Knee Padz - Krypto Knee Padz feature O'Neill's tried and tested knee protection material for long lasting durability without impacting comfort
  
  
• Key Pocket - Hidden key pocket in the right leg below the knee. Keep your key safe and in a hassle-free location

The Gnaraloo Softshell Flounder Pounder combines shortboard performance into one of the most user-friendly softboard designs on the market.

SKIN: Thick Polyethylene deck and a soft slick skin on the bottom is super durable, yet soft enough to keep beginners safe.

CORE: Expanded polystyrene core with TRIPLE internal stringer system produces a rigid flex pattern that can be pushed hard through turns. Other softboards can over flex, but the integrity of the rocker is maintained in the Flounder Pounder bringing the feel closer to a traditional fiberglass surfboard.

CONSTRUCTION: Safe for all skill levels, the vacuum construction process eliminates hard or sharp surfaces, and prevents peeling or bubbling.

FEATURES: Leash plug with HD internal reinforcements plus FCS compatible fin boxes and flexible thruster fin set makes it fast and easy to hit the water, and upgrade the performance of the board with stiffer fins.

Manta Pro XT BPP Bodyboard 46"

Ultimate and timeless bodyboard. Manta tradition rests here.
Larger, wide template allows for all sizes. Full length thumb grooves with nose bulbs deliver total control.
Everyone can use this board. Allows for controlled carving and turns through all conditions. More a GT than a sports car!

BPP Core range:
High performance, lightweight, rigid and responsive. Beaded polypropylene cores are the signature bodyboard experience. BPP cores work with you to improve performance in all conditions – lightweight/responsive/superb memory. Start or finish here. Experience the best materials in bodyboarding.
BPPhd core

Features:

• Wide template
• Twin G-glass stringers
• Full length thumb grooves
• XPS slick
• ChannelsNose bulbs
• Manta Plug

Waves- all conditions with care.

Manta Pro XT BPP Bodyboard 44"

Ultimate and timeless bodyboard. Manta tradition rests here.
Larger, wide template allows for all sizes. Full length thumb grooves with nose bulbs deliver total control.
Everyone can use this board. Allows for controlled carving and turns through all conditions. More a GT than a sports car!

BPP Core range:
High performance, lightweight, rigid and responsive. Beaded polypropylene cores are the signature bodyboard experience. BPP cores work with you to improve performance in all conditions – lightweight/responsive/superb memory. Start or finish here. Experience the best materials in bodyboarding.
BPPhd core

Features:

• Wide template
• Twin G-glass stringers
• Full length thumb grooves
• XPS slick
• ChannelsNose bulbs
• Manta Plug

Waves- all conditions with care.

O'Neill Women's Hyperfreak Chest Zip 3/2 Abyss

O'Neill HyperFreak Full Fuze 3/2 - Abyss

The O’Neill Hyperfreak 3/2mm Chest Zip Wetsuit is constructed with super light TechnoButter 3 and Technobutter 3X neoprene; making it the most lightweight, fully sealed suit on the market. Advanced technology allows you to perform at the highest level, while minimal seam design ensure such high comfort, you'd swear you were surfing naked

Features:

• 3/2mm
• Super minimal seam deisgn
• Contortionist seamless shoulder
• Technobutter 3 Neoprene
• Glued & Blindstitched Seam Construction
• F.U.Z.E Entry System
• Double Superseal Neck
• Strategic Seamless Paddle Zones
• Sidewinder S-Curve Seams
• Krypto Knee Padz
• External Key Pocket with Loop

O'Neill Hyperfreak Chest Zip 3/2  - Marine

Yeti Hopper M12 Backpack Cooler - Core Colours

SOFT COOLER

A COOLER THAT SHOULDERS THE COLD
When you’ve got a few pals, a few refreshments, but the lake is a few miles down the trail, the YETI® Hopper M12 Backpack Soft Cooler has your back. It’s the perfect refreshment hauler for any day trip or side mission. This comfortable, easy-to-open (and stay open) cooler was designed to fit wine bottles and hold up to 20 cans* of your favorite beverage for days in the summer sun. Attach accessories such as the Rambler Bottle Sling or Sidekick Dry Gear Case to the HitchPoint™ Grid for even more hands-free function. The durable MagShield Access uses a strip of ultra-strong magnets that keeps your cooler closed and leak-resistant. And the Kangaroo Pocket lets you easily stash away keys, a wallet, or phone so you can get going.
WARNING: Do not leave your soft cooler open in the presence of children and animals. Entrapment and suffocation can occur.
WARNING: Hopper® Soft Coolers are not compatible with dry ice. Use of dry ice will cause airtight vessel to explode.
WARNING: This product contains magnets. Placing near a pacemaker may cause interference.

EASY TO OPEN. TOUGH TO BREAK.
MAGSHIELD ACCESS Durable and powerful magnets create an ultra leak-resistant shield that stays open when you need it and snaps closed with a gentle push. DRYHIDE SHELL High-density fabric withstands punctures and UV rays. To help extend the life of the cooler, both the interior and exterior materials are treated to be mildew resistant.

KEEPS YOUR ESSENTIALS AT HAND
KANGAROO POCKET Phone, keys, wallet, or a little bit of hot sauce. Easily access all your must haves. HITCHPOINT GRID Securely attach your SideKick Dry Gear Case or load it up with zingers, nippers, bottle openers, and multitools.

HOLDS THE COLD
COLDCELL INSULATION Closed-cell foam offers impressive cold-holding capabilities, helping keep your frosty goods ice cold. LEAKPROOF LINER RF welding used to eliminate stitching and provide leakproof seams in the interior liner.

COMFORTABLY CARRIES IT ALL
DOUBLE-STITCHED CARRY Every pick-up point is reinforced so you can handle more weight than you'd prefer to carry. HANDS-FREE HAULING Slim, tapered design and ergonomic straps evenly distribute weight for an easier haul.

Fits 20 cans (only)
Fits 5.4 kgs of ice (only)
Wine bottle compatible

EXTERNAL DIMENSIONS
43.2W X 20.30 X 40.6H CM

INTERNAL DIMENSIONS
26.7W X 15.70 X 31.8H CM

EMPTY WEIGHT
2 KG

Note - Yeti Thin Ice not included

O&E Ezi-Rider Soft Board 5'6"

Part of your quiver Ezi-Rider boards have stable, versatile template shapes that suit entry level surfing, right through to small wave shredding.Constructed from durable, high quality materials.

Summer fun for the whole family. The Ezi-Rider 5'6 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.

Features:

• Length: 5'6

• Width: 21"

• Thickness: 2 3/4"

• Volume: 40L

• Fins: 3 x 4.5" Soft PU

• Fin Box: Thruster - Interchangeable Dual Tab

• Rider Weight: <70k

Features:

IXL + WBS DECK SKIN Crosslinked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant.

EPS CORE Highly waterproof and lightweight. 2x stringers increase board strength and maintain rocker.

HDPE BOTTOM PLATE 1mm thick HDPE high density polyethelene plate. Durable, extra strength performance slick. Available in a range of colours.

STRINGERS Increase board strength. Stringers are moulded directly into the core to give superior strength and maintain rocker (nose & tail lift).

PROVEN TEMPLATE SHAPES Developed and refined over 20 years, Ezi Rider template shapes are tested and proven to be the best.

THERMAL REACTIVE SIMULATION To help protect against delamination, all O&E bodyboards are tested in a heat induced environment at 70Ì´°C for two hours.

SUBSTRATE Impact resistant PE foam substrate material between core and bottom slick for high strength lamination.

Patagonia Boulder Fork Rain Jacket - Smolder Blue

Whether you’re seeking boulders and alpine views or stalking rainbow trout, this low-profile, waterproof jacket will keep you dry and provide rain protection from the fork in the trail to the places less travelled, and back again. This 3-layer shell meets our H2No® Performance Standard for exceptional waterproof/breathable protection, and the fabric, membrane and durable water repellent (DWR) finish are made without intentionally added PFAS. Made in a Fair Trade Certified™ factory.

Waterproof H2No® Performance Standard 3-Layer Shell
Waterproof/breathable H2No® Performance Standard 3-layer shell provides the highest levels of comfort and performance, and long-term waterproof durability, and the fabric, membrane and DWR finish are made without intentionally added PFAS
Minimalist Features
Streamlined, essential features keep things focused and packable
Adjustable Hood with Visor
Low-profile hood with a laminated visor and a single-pull adjust provides good visibility in poor conditions, accommodates a variety of headwear, effectively sheds water and lies flat when not in use
Watertight Zippers and Functional Front Pockets
Waterproof, exposed centre-front zipper; one left-chest zippered pocket; two watertight, zippered, high handwarmer welt pockets are large enough for a fly box, a map or a notebook
Stormproof Cuffs and Hem
Minimal cuffs with streamlined hook-and-loop tabs seal out weather; an adjustable drawcord cinch at the hem, routed up through the front pockets, keeps out weather and reduces bulk under a pack waistbelt
Supporting the People Who Made This Product
Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labour
Country Of Origin
Made in Vietnam.
Weight
388 g (13.7 oz)

Materials
H2No® Performance Standard shell: 3-layer, 3.7-oz 30-denier 100% recycled polyester ripstop face, a polyester membrane, a recycled polyester tricot backer and a durable water repellent (DWR) finish
Fabric, membrane and DWR finish made without intentionally added PFAS
Made in a Fair Trade Certified™ factory
Care Instructions: Machine Wash Cold, Do Not Bleach, Tumble Dry Low, Do Not Iron, Do Not Use Fabric Softeners