Green

Yeti Hopper Flip 8 Cooler - Core Colours

A personal cooler for solo trips and treks. Sling it over your shoulder and head out.

One of the joys of a day trip is traveling light. The Hopper Flip® Soft Cooler in this smaller format is perfect for keeping your food and drinks cold while out in the field. The Hopper Flip® has the insulation power only a YETI® Cooler can offer and is engineered to be tough - because flying solo doesn't mean you won't get a little dirty. The Hopper Flip® 8 Soft Cooler is your new day trip MVP.

Features

HYDROLOK™ ZIPPER

• Our YETI-tough, 100% leakproof, and high performance zipper.

COLDCELL™ INSULATION

• Closed-cell rubber foam offers far superior cold-holding to ordinary soft coolers.

DRYHIDE™ SHELL

• Our Dryhide™ Shell is made from a high-density fabric that withstands punctures and UV rays. Both the interior and exterior materials are also treated to be mildew resistant - extending the life of your cooler.

PEOPLE ARE ASKING

WHAT SIZE SHOULD I BUY?
These coolers are engineered for portability. Ultimately it depends on how much you want to pack. For example, the insulated backpack cooler is ideal for unsteady terrain or getting there on bike.

IS IT EASY TO CLEAN?
Yes, use a mixture of mild dish soap and water with a gentle cloth for the interior, exterior, and zipper. Be sure to fully air dry before zipping closed and storing.

WHAT ACCESSORIES ARE AVAILABLE FOR MY SOFT COOLER?
The HitchPoint™ Grid makes it easy to accessorise your soft cooler. Fasten bottle openers, carabiners, or the Sidekick Dry® Bag. For a full list, visit our Cooler Accessories page.

HOW LONG WILL IT KEEP ICE?
Our soft coolers provide serious cold-holding power. But since every adventure is different, we can't give an exact timeframe. If you want to maximise ice retention, check out our ice retention guide.

ARE THESE PERSONAL COOLERS DRY ICE COMPATIBLE?
No. The zipper is airtight and would not allow proper ventilation, which could cause the cooler to explode. Check out our Roadie® and Tundra® Hard Coolers if you need to use dry ice.

HOW MANY CANS WILL IT HOLD?
With an ice-to-contents ratio of at least 2:1: The Hopper Flip® 8 can hold eight cans, the Hopper Flip® 12 can hold 13 cans, and the Hopper Flip® 18 can hold 20 cans.

WHAT IS THE BEST WAY TO APPLY THE ZIPPER LUBRICANT TO MY PERSONAL SOFT COOLER?
After cleaning and removing debris from your zipper, apply a thin layer of lubricant to the front and back surfaces of the top seal and adjoining teeth, then wipe away any excess product.

IS THERE A WARRANTY?
The Hopper® Soft Cooler family comes with a three-year warranty.

Measurements & Specs

External Dimensions

• 31.5W X 21.8D X 26.9H CM

Internal Dimensions

• 26.2W X 17.3D X 20.3H CM

Empty Weight

• 1.2 kg

Billabong Boy's  Absolute Chest Zip 4/3 - Neon Green

Yeti Crossroads® 22L Backpack - Core Colours 

Overview

The Crossroads® 22L Backpack is the simple and strong go-bag built for carrying what you need without the weight. Essentials are always within reach with a Flip-Top Vault pocket that turns outward for a larger main opening. And don’t worry about the dismount — thanks to SideHustle™ Pockets you can easily swing the bag to the side to access contents through side-zip entry points. Talk about efficiency.

Features

RELIABLE MATERIAL

• Inspired by motorcycle gear, TuffSkin™ Nylon is an expedition-grade, 700 Denier, water and abrasion-resistant material. The GroundControl™ Base is PU-coated and as easy to clean as it is durable. Plus, it’s engineered to sweep away from the lumbar — because your back strength is better used for bouldering.

FLIP-TOP VAULT POCKET

• Keep your daily gear at your fingertips through double-sided pocket with interior and exterior access. Reverse that pocket for a wider opening that makes dropping in gear easy.

360-DEGREE PADDED LAPTOP VAULT

• Don’t stress about unexpected bag drops — a suspended sleeve has wraparound padding for extra protection. The sleeve will fit most 13” and 15” laptops.

SIDEHUSTLE POCKETS

• Grabbing your granola bar breakfast? No need to take your pack off on a busy train. Access your things without dismounting your bag - just swing it to the side and reach through one of the side-zip entry points.

People are asking

What Situations Are This Backpack Best For?
This bag is the tiny-but-mighty daily companion. Whether you’re hustling to work, exploring around town, or hitting your favorite coffee shop, this is your pack.

Is This Bag Insulated?
No, this bag is not a cooler. Looking for a backpack cooler? Check out our Hopper®M20 Backpack Cooler.

What Size Laptops Will It Fit?
It’s designed to accommodate most 13” and 15” laptops.

What’S The Best Way To Clean This Bag?
Whether it’s dirt, sunscreen, or a rogue drop of barbecue sauce, Tuffskin™ Nylon can take whatever your adventures throw at it. Spot clean as needed with mild dish soap and a damp cloth.

Is This An Adventure Pack?
This pack is best for commuting to work, the coffee shop, roadtrips, air travel, and getting around town. But our TuffSkin™ Nylon makes it one of the most durable of its kind. Need something else? Check out our Waterproof Bags.

Is It Carry-On Compatible?
Yes. This is a great commuting and travel backpack. It will fit under most airline seats, but always check with the airline to confirm.

Measurements & Specs

EMPTY WEIGHT

• 1.4 kg

DIMENSIONS

• 30.5W X 18.0D X 47.0H CM

Patagonia Lightweight Insulated Fjord Flannel Shirt - Ashore: Old Growth Green

Made from soft yet durable 100% Cotton in Conversion brushed flannel with 80-g Thermogreen® 100% recycled polyester insulation, the Lightweight Insulated Fjord Flannel Shirt keeps you warm in casual, timeless style. Made in a Fair Trade Certified™ factory.

Specs & Features

Fabric Details

• Body fabric is made from 100% Cotton in Conversion brushed flannel; the smooth lining is 100% recycled polyester taffeta with a durable water repellent (DWR) finish made without intentionally added PFAS

Insulation Details

• Insulated with toasty 80-g Thermogreen® 100% recycled polyester

Pocket Details

• Two chest pockets with button-closure flaps keep your valuables secure; two side-entry handwarmer pockets help get your fingers working again in cold weather

Button-Front Placket

• Full-length, button-front placket provides easy adjustability to accommodate changing conditions

Adjustable Cuffs

• Cuffs can be worn buttoned in the cold or unbuttoned to allow for easy sleeve rollup in warmer weather

Shirttail Hem

• Made with a shirttail hem to go with most everything and everywhere, from casual hangouts to commuting to work or school

Supporting the People Who Made This Product

• Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labor

Country of Origin

• Made in Vietnam.

Weight

• 763 g (26.9 oz)

Materials & Care Instructions

Body

• 4.8-oz 100% Cotton in Conversion double-sided brushed flannel

Lining

• 2.2-oz 100% recycled polyester taffeta with a durable water repellent (DWR) finish made without intentionally added PFAS

Insulation

80-g Thermogreen® 100% recycled polyester

Lining fabric is certified as bluesign® approved

Made in a Fair Trade Certified™ factory

Care Instructions

• Machine Wash Warm, Do Not Bleach, Tumble Dry Low, Cool Iron

Patagonia Lightweight Insulated Fjord Flannel Shirt - Old Growth Green

Made from soft yet durable 100% Cotton in Conversion brushed flannel with 80-g Thermogreen® 100% recycled polyester insulation, the Lightweight Insulated Fjord Flannel Shirt keeps you warm in casual, timeless style. Made in a Fair Trade Certified™ factory.

Specs & Features

Fabric Details

• Body fabric is made from 100% Cotton in Conversion brushed flannel; the smooth lining is 100% recycled polyester taffeta with a durable water repellent (DWR) finish made without intentionally added PFAS

Insulation Details

• Insulated with toasty 80-g Thermogreen® 100% recycled polyester

Pocket Details

• Two chest pockets with button-closure flaps keep your valuables secure; two side-entry handwarmer pockets help get your fingers working again in cold weather

Button-Front Placket

• Full-length, button-front placket provides easy adjustability to accommodate changing conditions

Adjustable Cuffs

• Cuffs can be worn buttoned in the cold or unbuttoned to allow for easy sleeve rollup in warmer weather

Shirttail Hem

• Made with a shirttail hem to go with most everything and everywhere, from casual hangouts to commuting to work or school

Supporting the People Who Made This Product

• Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labor

Country of Origin

• Made in Vietnam.

Weight

• 763 g (26.9 oz)

Materials & Care Instructions

Body

• 4.8-oz 100% Cotton in Conversion double-sided brushed flannel

Lining

• 2.2-oz 100% recycled polyester taffeta with a durable water repellent (DWR) finish made without intentionally added PFAS

Insulation

80-g Thermogreen® 100% recycled polyester

Lining fabric is certified as bluesign® approved

Made in a Fair Trade Certified™ factory

Care Instructions

• Machine Wash Warm, Do Not Bleach, Tumble Dry Low, Cool Iron

Manta Force BPP Bodyboard 44"

A legendary traditional Manta model.
Bold new template gives width and stability – superb perimeter deck lip delivers all round control options (unbeatable board control).

Force offers the best value in BPP cores.
Manta technical development since 1985 has taken us to the Force specification.

BPP Core range:
High performance, lightweight, rigid and responsive. Beaded polypropylene cores are the signature bodyboard experience. BPP cores work with you to improve performance in all conditions – lightweight/responsive/superb memory. Start or finish here. Experience the best materials in bodyboarding.

Features:

• G-glass stringer
• Perimeter deck control system
• XPS slick
• Channels
• Nose bulbs
• Manta Plug

Waves- all conditions with care.

Manta Force BPP Bodyboard 42

A legendary traditional Manta model.
Bold new template gives width and stability – superb perimeter deck lip delivers all round control options (unbeatable board control).

Force offers the best value in BPP cores.
Manta technical development since 1985 has taken us to the Force specification.

BPP Core range:
High performance, lightweight, rigid and responsive. Beaded polypropylene cores are the signature bodyboard experience. BPP cores work with you to improve performance in all conditions – lightweight/responsive/superb memory. Start or finish here. Experience the best materials in bodyboarding.

Features:

• G-glass stringer
• Perimeter deck control system
• XPS slick
• Channels
• Nose bulbs
• Manta Plug

Waves- all conditions with care.

O&E The Bug - 5'6"

Looking for a soft board to start the groms on early? The Bug 5'2" Soft Board is the perfect introduction to waves; with a soft, durable deck and soft PU fins. This board has been designed for supreme stability to help the young ones learn and have a fun time!

TOP - DECK
Cross-linked IXL PE skin. Highly water resistant and extremely durable. Excellent grip and impact resistant. 

MIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate with mesh. Durable, extra strength performance slick.

INTERCHANGEABLE BOLT THROUGH FIN BOX
Compatible with most major dual tab fin brands. Allows quick and easy fin changing. Secures with fin key (included).

Features:

• Length: 5'6
• Width: 20 3/4"
• Thickness: 2 3/16"
• Volume: 39L
• Board Weight: 2.94kg
• Fins: 3 x 4.5" Soft PU
• Fin Box: Thruster - Interchangeable Dual Tab
• Rider Weight: <65kg

O&E The Bug - 6'0"

Looking for a soft board to start the groms on early? The Bug 6'0" Soft Board is the perfect introduction to waves; with a soft, durable deck and soft PU fins. This board has been designed for supreme stability to help the young ones learn and have a fun time!

Features:

• Length: 6'0

• Width: 21 5/8"

• Thickness: 3 1/8"

• Volume: 44L

• Board Weight: 3.55kg

• Fins: 3 x 4.5" Soft PU

• Fin Box: Thruster - Interchangeable Dual Tab

• Rider Weight: <75kg

FCS Travel 2 Shortboard/Fish Cover - Alpine

Description

The FCS Travel 2 Cover is perfect for international strike missions or weekends on the road to remote locations. The FCS Travel 2 is loaded with features to get your two favourite boards safely to the destination. Designed tougher to withstand the beatings through transit, and with the unique ModuLink System to make your life easy on the road.

New to the 25-26 FCS GO-Lite cover range is the Alpine colourway, updated templates, tougher materials, and the all-new Nose Impact Protection Plate, which is used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features

600D WATERPROOF & ANTI-ABRASION SHELL

• Our anti-abrasion PRC-coated ripstop prevents water ingress and lasts longer

NOSE & TAIL IMPACT PROTECTION PLATES

• 5mm high-density EVA nose and tail impact protection plates

WETTY STASH POCKET with DRAINAGE

• Conveniently stash your wetsuit in the drainage pocket on your trek back

ModuLink CONNECT SYSTEM

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

ULTIMATE COMFORT

• Moulded EVA carry handle and unique padded shoulder strap for extra comfort

DURABLE PK NYLON ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

10MM FOAM PROTECTION

• PE Foam internal walls for the ultimate protection and insulation

COMPATIBILITY

• All NEW Covers - Modulink Stacking System
  
  
• Mission Wheely Bag - Modulink Stacking System

Yeti Crossroads® 27L Backpack - Core Colours

Overview

Thought you couldn't have a backpack tough enough to go from the train to the trailhead? Think again. The Crossroads® 27L pack yearns for a detour from your daily routine. Made from 700 Denier, water and abrasion-resistant TuffSkin™ Nylon, this bag makes no compromises. It’s built with a large main compartment, two Rambler® Bottle pockets, and opens wide for easy loading and unloading. Pro tip: When you’re traveling, secure your pack to the top of your roller with the luggage pass-through sleeve.

Features

TOUGH EXTERIOR

• Inspired by motorcycle gear, TuffSkin™ Nylon is an expedition-grade, 700 Denier, water and abrasion-resistant material. The GroundControl™ Base is PU-coated and as easy to clean as it is durable.

ERGONOMIC

• Our contoured shoulder straps are backed with EVA Foam to offer an ultra-comfortable carry all day long. The no-pressure back panel is engineered to sweep away from the lumbar — because your back strength is better used for bouldering.

ORGANISED

• Don’t stress about unexpected bag drops — a suspended sleeve has wraparound padding for extra protection. The sleeve will fit most 13” and 15” laptops.

ACCESSIBLE

• Don’t dig past your hoodie to get to hydration. Multiple access points allow you to zip open the side of your pack to get straight to the 18 oz. or 26 oz. Rambler® Bottle Sleeve.

People are asking

What Situations Are This Backpack Best For?
From the office to the coffee shop, to road trips and air travel – or just hopping around town or heading out on overnight trips –this bag says yes to everything.

What Size Laptops Will It Fit?
This bag’s separate laptop pocket with padding will fit most 13” and 15” laptops.

Is This An Adventure Pack?
This pack is best for commuting to work, the coffee shop, roadtrips, air travel, and overnights. But our TuffSkin™ Nylon makes it one of the most durable of its kind. Need something else? Check out our Waterproof Bags.

Is It Carry-On Compatible?
Yes. This is a great commuting and travel backpack. It will fit under most airline seats, but always check with the airline to confirm.

What Are The Removable Straps For?
These straps are great for attaching things like a rain jacket or a yoga mat.

Will My Water Bottle Fit?
Yes, this pack has two interior pockets designed to fit Rambler® 18 oz. and 26 oz. Bottles.

Measurements & Specs

EMPTY WEIGHT

• 1.6 kg

DIMENSIONS

• 31.0W X 23.9D X 51.6H CM

FCS Travel 3 Shortboard/Fish Cover - Alpine 

Description 

The FCS Travel 3 Cover is perfect for international strike missions or weekends on the road to remote locations. The FCS Travel 3 is loaded with features to get your three favourite boards safely to the destination. Designed tougher to withstand the beatings through transit, and with the unique ModuLink System to make your life easy on the road.

New to the 25-26 FCS GO-Lite cover range is the Alpine colourway, updated templates, tougher materials, and the all-new Nose Impact Protection Plate, which is used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.


Features 

600D WATERPROOF & ANTI-ABRASION SHELL

• Our anti-abrasion PRC-coated ripstop prevents water ingress and lasts longer

NOSE & TAIL IMPACT PROTECTION PLATES

• 5mm high-density EVA nose and tail impact protection plates

WETTY STASH POCKET with DRAINAGE

• Conveniently stash your wetsuit in the drainage pocket on your trek back

ModuLink CONNECT SYSTEM

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

ULTIMATE COMFORT

• Moulded EVA carry handle and unique padded shoulder strap for extra comfort

DURABLE PK NYLON ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

10MM FOAM PROTECTION

• PE Foam internal walls for the ultimate protection and insulation

COMPATIBILITY

• All NEW Covers - Modulink Stacking System
  
  
• Mission Wheely Bag - Modulink Stacking System

FCS Travel 2 Mid-Length Cover - Alpine

Description

The FCS Travel 2 Cover is perfect for international strike missions or weekends on the road to remote locations. The FCS Travel 2 is loaded with features to get your two favourite boards safely to the destination. Designed tougher to withstand the beatings through transit, and with the unique ModuLink System to make your life easy on the road.

New to the 25-26 FCS GO-Lite cover range is the Alpine colourway, updated templates, tougher materials, and the all-new Nose Impact Protection Plate, which is used throughout the range.

The FCS Travel 2 Cover is perfect for international strike missions or weekends on the road to remote locations. This cover is loaded with new features to get your two favourite boards safely to the destination.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features

600D WATERPROOF PRC

• Our anti-abrasion PRC-coated ripstop prevents water ingress and lasts longer

IMPACT PROTECTION PLATES

• 5mm high-density EVA nose and tail impact protection plates

ModuLink SYSTEM

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

ULTIMATE COMFORT

• Moulded EVA carry handle and unique padded shoulder strap for extra comfort

DURABLE ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

10MM FOAM CONSTRUCTION

• PE Foam internal walls for the ultimate protection and insulation

COMPATIBILITY

• All NEW Covers - Modulink Stacking System
  
  
• Mission Wheely Bag - Modulink Stacking System

Creatures Fish Triple Board Bag DT2.0 - Military Black

The Fish Triple Shortboard Boardcover is for serious trips. Protect a quiver of boards in a cover that features 10mm FOAM padding, reinforced nose + tail protection for safely transiting your quiver to your destination. The Triple Boardcovers are now lighter, stronger, and more durable with the exclusive DIAMOND-TECH® 2.0 fabrics.

Features

DIAMOND-TECH® Fabric - lightweight strength and water-resistance

DIAMOND-TECH® 2.0 Fabric - strategically positioned on high-stress areas for extra durability

FOAM Protection - 10mm closed cell

Armour Impact System - 20% more protection to tail + nose

Expandable Sidewall - FOAM 10mm closed cell

Heavy Duty Marine-Grade corrosion resistant zips

Aero Mesh Ventilation System - to keep boards cool

Flip lid - wide zip opening for easy packing

10mm padded Stash Shoulder Strap and FOAM Padded handles - for carrying comfort

Compression Straps - inside and out hold boards in place and keep everything compact

Removable internal dividers - to help separate boards

Heavy Duty drag plate - for tail protection and skidding along smooth surfaces

Yeti Hopper Flip® 18 Soft Cooler - Core Colours

Carry a day’s worth of lunch and a six-pack or more for you and your crew.

The weekend is calling, so pack up your Hopper Flip® 18 and head for the hills. The bigger build suits your larger hauls and longer expeditions. Set out with your lunch while you work for your dinner, and have a couple cold ones to kick back with after. Hopper Flip® 18 is durable, leakproof, and versatile with the HitchPoint™ Grid for tools and accessories. And like all YETI® Coolers, it’s equipped with superior insulation to keep the cold for days. 

Features

HYDROLOK™ ZIPPER

• Our YETI-tough, 100% leakproof, and high performance zipper.

COLDCELL™ INSULATION

• Closed-cell rubber foam offers far superior cold-holding to ordinary soft coolers.

DRYHIDE™ SHELL

• Our Dryhide™ Shell is made from a high-density fabric that withstands punctures and UV rays. Both the interior and exterior materials are also treated to be mildew resistant - extending the life of your cooler.

WIDE-MOUTH OPENING

• Allows easy access and visibility to your contents.

PEOPLE ARE ASKING

WHAT SIZE SHOULD I BUY?
These coolers are engineered for portability. Ultimately it depends on how much you want to pack. For example, the insulated backpack cooler is ideal for unsteady terrain or getting there on bike.

IS IT EASY TO CLEAN?
Yes, use a mixture of mild dish soap and water with a gentle cloth for the interior, exterior, and zipper. Be sure to fully air dry before zipping closed and storing.

WHAT ACCESSORIES ARE AVAILABLE FOR MY SOFT COOLER?
The HitchPoint™ Grid makes it easy to accessorise your soft cooler. Fasten bottle openers, carabiners, or the Sidekick Dry® Bag. For a full list , visit our Cooler Accessories page.

HOW LONG WILL IT KEEP ICE?
Our soft coolers provide serious cold-holding power. But since every adventure is different, we can't give an exact timeframe. If you want to maximise ice retention, check out our ice retention guide.

ARE THESE PERSONAL COOLERS DRY ICE COMPATIBLE?
No. The zipper is airtight and would not allow proper ventilation, which could cause the cooler to explode. Check out our Roadie® and Tundra® Hard Coolers if you need to use dry ice.

HOW MANY CANS WILL IT HOLD?
With an ice-to-contents ratio of at least 2:1: The Hopper Flip® 8 can hold eight cans, the Hopper Flip® 12 can hold 13 cans, and the Hopper Flip® 18 can hold 20 cans.

WHAT IS THE BEST WAY TO APPLY THE ZIPPER LUBRICANT TO MY PERSONAL SOFT COOLER?
After cleaning and removing debris from your zipper, apply a thin layer of lubricant to the front and back surfaces of the top seal and adjoining teeth, then wipe away any excess product.

IS THERE A WARRANTY?
The Hopper® Soft Cooler family comes with a three-year warranty.

Measurements & Specs

External Dimensions

• 45.0W X 29.2D X 32.5H CM

Internal Dimensions

• 37.1W X 22.1D X 25.4H CM

Empty Weight

• 2 kg

Yeti Hondo® Beach Chair - Core Colours

Take it easy, no matter where you take it.

The go-anywhere beach chair that’s portable, comfortable, and as always, durable. Its lightweight frame and shoulder strap accessory make for easy carrying while the ultra-supportive FlexGrid™ Fabric provides a comfortable landing once you’ve reached that perfect stretch of sand. With four reclining positions and an ergonomic waterfall edge, this chair makes it easy to take it easy.

Features

CUSTOMISABLE COMFORT

• Locking controls under the armrest give way to four reclining levels, allowing you to dial in the perfect position from the comfort of your seat. And when it’s time to pack out, the chair’s bi-fold design collapses flat for easy carrying and convenient storage.

FLEXIBLE SUPPORT

• Weighing in at just under 6 kgs, it’s built with FlexGrid™ Fabric that can support up to 159 kgs without losing its shape. Paired with a waterfall headrest for pillow-like support, you can stretch out, lean back, and settle in — all without worrying about wear and tear.

WEATHER-RESISTANT MATERIALS

• Constructed with quick-drying EasyBreathe™ Mesh, UV-resistant FlexGrid™ Fabric, and a frame that can stand up to salt and sand, it might just be the last beach chair you ever own.

SHOULDER STRAP & CUP HOLDER INCLUDED

• The LongHaul™ Shoulder Strap makes for easy carrying while the YETI® Chair Cup Holder keeps your drink upright while you lay back. Plus, the chair is outfitted with multiple attachment points for additional storage; a hook on each armrest secures your Sidekick Dry® Gear Casee and a bar across the back accommodates your Hondo® Gear Bag

People are asking

Is there a carrying strap included?
Yes. The LongHaul Shoulder Strap allows you to sling the chair over your shoulder for hands-free carrying across any distance.

Is there a cup holder included?
Yes. The YETI™ Chair Cup Holder is large enough to accommodate most vessels, including our Rambler® Wine Tumbler , Rambler® 26 oz. Water Bottle or Rambler® 35 oz. Straw Mug.

How do I clean my chair?
For easy cleaning, simply hose it down with water. For stubborn grime on the frame or fabric, scrub with a simple mixture of mild soap and water using a soft bristle brush. We recommend hosing down your chair after use at the beach to remove salt and sand.

Is the material puncture resistant?
No, extremely sharp objects will puncture the fabric, but due to the weave, only large tears or cuts will affect the stability of the mesh.

How much weight can it support?
The mesh is made from FlexGrid™ Fabric, which can support up to 158 kgs of weight.

Will the chair rust?
The frame of the chair is made from powder-coated aluminum to stand up to salt and sand. However, long-term exposure can break down most metals. We recommend hosing your chair down after use at the beach to prolong the life of your chair.

Yeti Hopper M15 Soft Cooler Bag - Core Colours

SOFT COOLER

A SOFT COOLER THAT’S ANYTHING BUT.
The newest member of the Yeti Hopper Soft Cooler family is here with the tough-as-nails Hopper M15. Made with our durable MagShield Access, the extra-wide mouth top stays open when needed, making it easier than ever to load and unload food and drink for weekend excursions. Equipped with a strip of durable and powerful ultra-strong magnets, the top seals tight and locks cold in, while the Quick-Release Buckles add an extra layer of protection. And like the rest of our Hopper Soft Coolers, the Hopper M15’s built in HitchPoint Grid lets you attach accessories like the Rambler Bottle Sling and SideKick Dry Gear Case for extra utility on the go.
WARNING: Do not leave your soft cooler open in the presence of children and animals. Entrapment and suffocation can occur.
WARNING: Hopper Soft Coolers are not compatible with dry ice. Use of dry ice will cause airtight vessel to explode. WARNING: This product contains magnets. Placing near a pacemaker may cause interference.

EASY TO OPEN. TOUGH TO BREAK.
MAGSHIELD ACCESS Durable and powerful magnets create an ultra leak-resistant shield that stays open when you need it and snaps closed with a gentle push. The outer DRYHIDE SHELL High-density fabric withstands punctures and UV rays. To help extend the life of the cooler, both the interior and exterior materials are treated to be mildew resistant.

KEEPS YOUR ESSENTIALS AT HAND
KANGAROO POCKET Phone, keys, wallet, or a little bit of hot sauce. Easily access all your must haves. HITCHPOINT GRID Securely attach your SideKick Dry Gear Case or load it up with zingers, nippers, bottle openers, and multitools.

HOLDS THE COLD
COLDCELL INSULATION Closed-cell foam offers impressive cold-holding capabilities, helping keep your frosty goods ice cold. LEAKPROOF LINER RF welding used to eliminate stitching and provide leakproof seams in the interior liner.

COMFORTABLY CARRIES IT ALL
DOUBLE-STITCHED CARRY Every pick-up point is reinforced so you can handle more weight than you'd prefer to carry.

Fits 32 cans (only)
Fits 6.4kgs of ice (only)
Wine bottle compatible

EXTERNAL DIMENSIONS
51.6W X 23.40 X 40.6H CM

INTERNAL DIMENSIONS
33.0W X 17.80 X 27.4H CM

EMPTY WEIGHT
2.5 KG

Note - Yeti Thin Ice Not included

FCS Travel 3 Shortboard/Fish Wheelie Cover - Alpine 

Description

The Travel Wheelie Cover is perfect for international strike missions and surf trips to remote locations. The FCS Travel Wheelie is loaded with features to get your favourite boards safely to the destination with the convenience of built-in wheels to make transit mobility fast and efficient. Designed to withstand the rough treatment through transit, and with the unique ModuLink System to make your life easy on the road.

New to the 25-26 FCS GO-Lite cover range is the Alpine colourway, updated templates, tougher materials, and the all-new Nose Impact Protection Plate, which is used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road.

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features 

600D WATERPROOF & ANTI-ABRASION SHELL

• Our anti-abrasion PRC-coated ripstop prevents water ingress and lasts longer

NOSE & TAIL IMPACT PROTECTION PLATES

• 5mm high-density EVA nose and tail impact protection plates

WETTY STASH POCKET with DRAINAGE

• Conveniently stash your wetsuit in the drainage pocket on your trek back

ModuLink CONNECT SYSTEM

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

ULTIMATE COMFORT

• Moulded EVA carry handle and unique padded shoulder strap for extra comfort

DURABLE PK NYLON ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

10MM FOAM PROTECTION

• PE Foam internal walls for the ultimate protection and insulation

ALL-TERRAIN WHEELS (Wheelie Covers Only)

• Rugged all-terrain wheels to haul you cover across any surface with ease

COMPATIBILITY

• All NEW Covers - Modulink Stacking System
  
  
• Mission Wheely Bag - Modulink Stacking System

 TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant.

MIDDLE - CORE/ STRINGERS
EPS (Extruded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included). 

THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

Yeti Hopper M20 Backpack Soft Cooler - Agave Teal LTD Edition

SOFT COOLER

THROW A DAY’S WORTH OF SNACKS AND BEERS ON YOUR BACK.

The Yeti Hopper M20 Soft Cooler allows you to put the day on your back - literally. This hands-free cooler comfortably straps on like a backpack to keep you mobile, while a strip of ultra-strong magnets keeps the cold locked in. The new MagShield Access opens wide so you can easily load in beer, ice, or your favorite sandwiches. Attach accessories such as the Rambler Bottle Sling or Sidekick Dry® Gear Case to the HitchPoint Grid to keep useful gear at your fingertips. The Hopper M20 is the cooler that goes where other coolers can’t.

Please note: Do not leave the cooler propped open and unattended in the presence of children and animals.

ERGONOMIC FIT
Part backpack, part cooler, all YETI. Hands-free hauling and a comfortable fit lets you take cold provisions well past the trailhead.

INNOVATIVE CLOSURE
MagShield Access uses powerful magnets to create an ultra leak-resistant shield that stays open when you need it and seals closed with a gentle push.

ULTRA-DURABLE
The outer DryHide Shell is made from a high-density fabric that withstands punctures and UV rays. To help extend the life of the cooler, both the interior and exterior materials are treated to be mildew resistant.

THERMAL PERFORMANCE
ColdCell Insulation uses closed-cell foam technology to lock the cold in and keep your refreshments fresh.

Fits 36 cans (only)
Fits 9.9 kgs of ice (only)
Wine bottle compatible
Does not possess a Kangaroo pocket

EXTERNAL DIMENSIONS
46.0W X 25.1D X 46.0H CM

INTERNAL DIMENSIONS
29.5W X 22.6D X 43.8H CM

EMPTY WEIGHT
2.8 KG

Yeti Cayo™ All-Weather Backpack 35L - Core Colours

Engineered to withstand the elements and haul the extra long days.

The largest size in our lineup that holds it all and protects your gear with a durable, weather-resistant DryHide™ Shell. The largest loads stay balanced with adjustable straps, and an added mesh back panel provides an extra layer of comfort. Quick-access pockets keep everything in place and the hydration reservoir compatible pocket keeps hydration on hand. 

Features

Weather Resistant

• The backpack that can keep up with the daily commute and any outdoor pursuit. Built with an ultra-durable DryHide™ Shell, RF welded seams, and PU coated zipper, belongings stay safe from the elements. Please Note: The Cayo™ Backpack is made of water resistant materials but is not waterproof. Under certain circumstances and weather conditions, contents of the bags may get wet.

Breathable and Ergonomic

• Removable waist and chest straps balance your load and adjust to fit just right. The ComfortComb™ mesh back panel adds another layer of comfort and keeps air moving while you are on the move.

Quick-Access Pockets

• Keep hydration on hand with grab-and-go pockets and your small essentials secure, dry, and at-the-ready.

Interior Organisation

• Pack and protect your valuables with stretch-woven internal storage. The interior sleeve holds up to a three-litre hydration reservoir in place.

People are asking

What's this bag best used for?
It’s great to use as an everyday, all-weather backpack. It’s constructed with water-resistant materials and helps keeps your belongings protected from the elements.

Is this bag insulated?
No, this bag is not a cooler. Looking for a backpack cooler? Check out Hopper® M20 Backpack Cooler.

Will my laptop fit?
The 35L fits up to a 13" laptop. 15L and 25L fit a small tablet.

What's the best way to clean this bag?
Clean with a soft cloth, mild soap, and warm water. Scrub lightly with a soft brush for tougher stains. Make sure your backpack is completely dry before closing the zipper and storing. Do not put it in the washing machine.

Is this bag waterproof?
No, this bag is made with water-resistant materials, but not waterproof. Therefore under certain circumstances and weather conditions, contents of the bags may get wet. Need something else? Check out our Panga® Waterproof Backpack.

What are the removable straps for?
The removable chest and waist straps can be adjusted for just the right fit and to reduce strain on your shoulders. They are there for when you need them and are easy to remove when you don’t.

Is there a warranty?
Yes, all Bags comes with a three-year warranty.

Measurements & Specs

External Dimensions

• 39.1W x 27.9D x 58.9H CM

Empty Weight

• 2 kg

Capacity

• 35 L

FCS Travel 4 Shortboard/Fish Cover - Alpine

 Description

The FCS Travel 4 Cover is perfect for international strike missions or weekends on the road to remote locations. The FCS Travel 4 is loaded with features to get your three favourite boards safely to the destination. Designed tougher to withstand the beatings through transit, and with the unique ModuLink System to make your life easy on the road.

New to the 25-26 FCS GO-Lite cover range is the Alpine colourway, updated templates, tougher materials, and the all-new Nose Impact Protection Plate, which is used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features

600D WATERPROOF & ANTI-ABRASION SHELL

• Our anti-abrasion PRC-coated ripstop prevents water ingress and lasts longer

NOSE & TAIL IMPACT PROTECTION PLATES

• 5mm high-density EVA nose and tail impact protection plates

WETTY STASH POCKET with DRAINAGE

• Conveniently stash your wetsuit in the drainage pocket on your trek back

ModuLink CONNECT SYSTEM

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

ULTIMATE COMFORT

• Moulded EVA carry handle and unique padded shoulder strap for extra comfort

DURABLE PK NYLON ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

10MM FOAM PROTECTION

• PE Foam internal walls for the ultimate protection and insulation

COMPATIBILITY

• All NEW Covers - Modulink Stacking System
  
  
• Mission Wheely Bag - Modulink Stacking System

Gnaraloo Beach Cruiser - 7'6"

• Gnaraloo Beach Cruiser surfboards provide the ultimate in fun and safety for beginner surfers. Theses boards are incredibly buoyant, stable, and easy to ride..
  
  
• With an emphasis on safety and durability, the Beach Cruiser feature a thick Polyethylene deck and a soft slick skin on the bottom surface that’s tough enough to take a beating, yet is soft enough to keep beginners safe.
  
  
• The secret to the performance of these boards lies within the core. An embedded plywood stringer system maintains the integrity of the rocker while providing a stiff, stable platform. This lets you paddle onto waves with minimal effort and feel confident once you’re on your feet.
  
  
• These surfboards are designed to withstand the toughest of treatment, making them ideal for surf schools. The vacuum construction process eliminates hard or sharp surfaces, and prevents peeling or bubbling. A reinforced tail zone also provides added protection.
  
  
• Available in a variety of sizes from 9 foot right down to 6’0″. Each board comes fitted with a convenient carry handle and an easy-to-use fin system complete with flexible thruster fin set.
  
  
• Your initiation into the world of surfing starts with a Gnaraloo Beach Cruiser.

Construction: Soft Shell (Soft)

Boards with Soft Shell construction feature much more technology then the eye can see. They are a combination of materials designed to allow the board to perform to the highest levels given the constraints of the flexibility of the materials. All boards feature an integrated Fin System, 2 or 3 Wooden Stringers depending on the size of the board to ensure the board is stiff enough. A lightweight EPS core combined with a PE foam layer on the deck and a High-Density PE Slick that is mounted to a thin PE Foam layer on the bottom give the board an awesome feel in the water. Soft enough not to hurt should you fall on it but hard enough to handle the power of the waves.

• Board Contours: Flat Bottom
  
  
• Rail: Full Rail
  
  
• Surfer Skill Level: Beginner
  
  
• Wave Height: 0-3ft

Yeti Hopper M30 Soft Cooler - Core Colours

Our carry-the-day, tough-as-nails Hopper® soft cooler has one big update. We’ve re-engineered the opening to offer a wide mouth for easy loading and unloading. It closes almost on its own with our HydroShield™ Technology – a strip of ultra-strong magnets – then is secured with two Quick-Release Buckles to ensure it can withstand being tossed around.

Please note: Do not leave the cooler propped open and unattended in the presence of children and animals.

DRYHIDE™ SHELL

High-density fabric resists mildew, punctures, and UV rays.

 

OUTSIDE 30.5cm x 44.5cm x 63.5cm

INSIDE 25.4cm x 40.6cm x 55.9cm

 

EMPTY WEIGHT 3.17 kg

Mick Fanning Twin Town Supersoft - Soy

TWIN TOWN SUPERSOFT

Twin Town Supersoft Surfboard – Built for Good Times & Versatile Surf

Twin Town Supersoft is the ultimate mid-length board made for pure fun. Built using traditional softboard technology, it strikes the perfect balance between lightweight, flexibility, and superior durability.

Why Choose Twin Town Supersoft?

• Mid-length twin shape delivers maximum speed, easy paddling, and stylish flow for all levels of surfers.
  
  
• Soft construction offers forgiving performance, making this board suitable for beginners and experienced surfers.
  
  
• Generates instant speed with minimal effort—paddle out and catch almost any wave with ease.
  
  
• Switch out the included soft flex keels for retro hard keel fin sets to unlock even faster high lines and unique twin fin rides.
  
  
• Designed for versatility—rides well in a wide variety of surf conditions, from gentle peelers to more punchy beach breaks.
  
  
• Lightweight build makes it easy to carry and manoeuvre, whether you’re cruising down the line or practicing turns.

Sizing and Volumes

6’6” x 22” x 2 3/4” (44L)

7’0” x 22” x 2 3/4” (48L)

7’6” x 22 5/8” x 2 7/8” (55L)

8’0” x 22 5/8” x 2 7/8” (59L)

Key Specs

• Construction: Supersoft
  
  
• Rocker: Medium
  
  
• Bottom contours: Single to double
  
  
• Outline: Mid-length twin keel

Benefits

• Effortless speed and flow allow you to cruise stylishly and with confidence
  
  
• Flexible and soft, offering durability and safety for daily use
  
  
• Versatile design works for all skill levels, from learning turns.
  
  
• Easily customisable—swap fins to create new sensations as you progress
  
  
• Perfect for those who want a fun board that’s ready for good times in any surf

Who’s it For?

Surfers of any level seeking a mid-length twin for maximum versatility and enjoyment

Beginners and experienced surfers wanting easy paddling, speed, and classic high-lines

Anyone after a durable, lightweight softboard, reliable in a variety of conditions

The Twin Town Supersoft delivers speedy paddling, flexible comfort, and pure fun—built for every surfer who wants to cruise with flow, switch up their style, and keep the good times rolling session after session.

Softech The Triplet 5'8"

• A combo of fresh and old school. The perfect board for fast and steezy surfing.
  
  
• A combo of fresh and old school. Drawing off performance shortboard bottom contours and rails with some old-school rocker and outline. This is the perfect board for fast and steezy surfing.
  
  
• Plenty of volume under the chest to chip into some weak ones, but a drawn-in winged swallow tail to really hook into a turn. Run as a twin to really get zipping or throw a stabiliser in to get a little control.
  
  
• Vacuum glassed with 6OZ. cloth
  
  
• High density PE foam deck
  
  
• Ultra-thin soft HDPE slick bottom
  
  Features:
  
• Size: 5'8" / 6'0" / 6'3"
  
  
• Dimensions: 5'8" x 20 1/2” x 2 7/16”,  6'0" x 21 1/8” x 2 3/8”,  6'3" x 21 1/4” x 2 3/4”
  
  
• Core: Epoxy Core
  
  
• Stringer: Single Stringer
  
  
• Fin Setup: Tri (x3 FCS II Fin Setup)
  
  
• Fin System: FCS II
  
  
• Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L

+ Leash Plug installed
+ FCS II Softflex Fins included

Ocean & Earth Ezi Rider Softboard 8'0

Summer fun for the whole family. The Ezi-Rider 6'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.

Features:
TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant

MIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).

THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

Features:

• Length: 8'0

• Width: 22 3/4"

• Thickness: 3 3/4"

• Volume: 80L

• Board Weight: 5.87 Kgs

• Fins: 3 x 4.5" Soft PU

• Fin Box: Thruster - Interchangeable Dual Tab

• Rider Weight: <110kg

The Beastie has been designed to be the ultimate fun board the volume is really well distributed for such a large board, the outline is generous providing a stable platform for catching waves perfect for those looking to progress their surfing to the next level or for the surfer looking for an alternative to a longboard.

The tail width provides lift and acceleration in the weakest waves creating a super generous sweet spot!

SIZING:

6’0 x 20 x 2 5/8  37.01L

6’6 x 22 x 2 3/4 46.19L

7’0 x 22 x 2 3/4  50.05L

7’6 x 22 5/8 x 2 7/8 57.51L

8’0 x 22 5/8 x 2 7/8  61.52L

Gnaraloo Beach Cruiser - 9'0"

• Gnaraloo Beach Cruiser surfboards provide the ultimate in fun and safety for beginner surfers. Theses boards are incredibly buoyant, stable, and easy to ride..
  
  
• With an emphasis on safety and durability, the Beach Cruiser feature a thick Polyethylene deck and a soft slick skin on the bottom surface that’s tough enough to take a beating, yet is soft enough to keep beginners safe.
  
  
• The secret to the performance of these boards lies within the core. An embedded plywood stringer system maintains the integrity of the rocker while providing a stiff, stable platform. This lets you paddle onto waves with minimal effort and feel confident once you’re on your feet.
  
  
• These surfboards are designed to withstand the toughest of treatment, making them ideal for surf schools. The vacuum construction process eliminates hard or sharp surfaces, and prevents peeling or bubbling. A reinforced tail zone also provides added protection.
  
  
• Available in a variety of sizes from 9 foot right down to 6’0″. Each board comes fitted with a convenient carry handle and an easy-to-use fin system complete with flexible thruster fin set.
  
  
• Your initiation into the world of surfing starts with a Gnaraloo Beach Cruiser.

Construction: Soft Shell (Soft)

Boards with Soft Shell construction feature much more technology then the eye can see. They are a combination of materials designed to allow the board to perform to the highest levels given the constraints of the flexibility of the materials. All boards feature an integrated Fin System, 2 or 3 Wooden Stringers depending on the size of the board to ensure the board is stiff enough. A lightweight EPS core combined with a PE foam layer on the deck and a High-Density PE Slick that is mounted to a thin PE Foam layer on the bottom give the board an awesome feel in the water. Soft enough not to hurt should you fall on it but hard enough to handle the power of the waves.

• Board Contours: Flat Bottom
  
  
• Rail: Full Rail
  
  
• Surfer Skill Level: Beginner
  
  
• Wave Height: 0-3ft

Picture Equation Flex Skin Chest Zip 3/2 - Dark Army Green

Paddling has never been so good! Featuring  brand new Flex Skin technology, the Picture Equation 3/2 Flex Skin Front Zip is an ultra-stretch, heavy-duty wetsuit ideal for spring and summer!

Equation wetsuits are made with the latest Eicoprene technology, a non-petroleum based synthetic foam derived from a mix of oyster shell powder, limestone, and recycled tires. To laminate the recycled polyester lining we use Aqua-A™, a solvent-free water-based glue with no harmful chemicals.

The Equation 3/2 Front Zip version is designed for sessions in 14°C-18°C water. The WPF lining (Warmth Performance), Picture's warmest lining available, makes this wetsuit stand out. The 3D-Knit construction and the WPF lining provide warmth by trapping air between each loop. The denser fabric offers extra comfort.

The suit's front zip and watertight seals minimize water entry. Comfort zones protect your ribs when paddling. It also features glued, blind-stitched, fully-taped seams (GBS), which provide protection, stretch, and water

• Comfort zones - twice as thick to protect your ribs
• Full GBS  - Triple glue-bonded and blindstitched seams with durable nylon thread provide ample stretch and are watertight

This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.

Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance.  Tri-fin set-up.

FINS: 3 Fins supplied – Futures template F6

CONSTRUCTION

O&E Creative Army -The General - Epoxy/Soft Board - Olive

It's the leader of the pack and one of the most versatile longboards in the Creative Army Range. Creative Army is the love child of former World Longboard Champ Josh Constable. In collaboration with Ocean and Earth, this soft board constructed in Epoxy has a modern rocker making for precise turns, fast trimming and awesome tip time. Even if you're a long time nose rider or just learning and wanting some fun, this is the longboard for you.

Features

• Length: 9'6
  
  
• Width: 23 3/4"
  
  
• Thickness: 3 1/8"
  
  
• Volume: 92L
  
  
• Board Weight: 8.4kg
  
  
• Fins: 1 x Single fin 9" PU
  
  
• Fin Box: 10" Centre Box

Creative Army Epoxy features

TOP - DECK

• Grippy EVA textured deck surface / 1 X E-Glass 6oz / 0.5mm wood veneer / 1 X E-Glass 6oz. Highly water resistant and extremely durable. Excellent grip and impact resistant.

MIDDLE - CORE/ STRINGERS

• EPS (Expanded Polystyrene) highly waterproof & lightweight. 2 x stringers (8'0" - 9'6") 1 x stringers (7'0" - 7'6") increases board strength and maintain rocker.

BOTTOM - SLICK

• 1mm thick HDPE high density polyethylene plate / 2 X E-Glass 6oz. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX

• Centre Fin - 10" fin box compatible with single fin screw and plate design.
  
  
• Side Fins - (sizes from 7'0"- 8'0") compatible with single tab / Future fins. Allows quick and easy fin changing.
  
  
• Secures with fin key (included).

Sizing

7'0 x 22 1/4 x 2 1/2 (45L) 2+1 Fin System
7'6 x 22 1/2 x 2 1/2 (52L) 2+1 Fin System
8'0 x 22 3/4 x 2 3/4 (61L) 2+1 Fin System
8'6 x 23 x 3 (79L) Single Fin
9'0 x 23 1/2 x 3 (87L) Single Fin
9'6 x 23 3/4 x 3 1/8 (92L) Single Fin

O&E Creative Army -The General - Epoxy/Soft Board - Mint

It's the leader of the pack and one of the most versatile longboards in the Creative Army Range. Creative Army is the love child of former World Longboard Champ Josh Constable. In collaboration with Ocean and Earth, this soft board constructed in Epoxy has a modern rocker making for precise turns, fast trimming and awesome tip time. Even if you're a long time nose rider or just learning and wanting some fun, this is the longboard for you.

Features

• Length: 9'6
  
  
• Width: 23 3/4"
  
  
• Thickness: 3 1/8"
  
  
• Volume: 92L
  
  
• Board Weight: 8.4kg
  
  
• Fins: 1 x Single fin 9" PU
  
  
• Fin Box: 10" Centre Box

Creative Army Epoxy features

TOP - DECK

• Grippy EVA textured deck surface / 1 X E-Glass 6oz / 0.5mm wood veneer / 1 X E-Glass 6oz. Highly water resistant and extremely durable. Excellent grip and impact resistant.

MIDDLE - CORE/ STRINGERS

• EPS (Expanded Polystyrene) highly waterproof & lightweight. 2 x stringers (8'0" - 9'6") 1 x stringers (7'0" - 7'6") increases board strength and maintain rocker.

BOTTOM - SLICK

• 1mm thick HDPE high density polyethylene plate / 2 X E-Glass 6oz. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX

• Centre Fin - 10" fin box compatible with single fin screw and plate design.
  
  
• Side Fins - (sizes from 7'0"- 8'0") compatible with single tab / Future fins. Allows quick and easy fin changing.
  
  
• Secures with fin key (included).

Sizing

7'0 x 22 1/4 x 2 1/2 (45L) 2+1 Fin System
7'6 x 22 1/2 x 2 1/2 (52L) 2+1 Fin System
8'0 x 22 3/4 x 2 3/4 (61L) 2+1 Fin System
8'6 x 23 x 3 (79L) Single Fin
9'0 x 23 1/2 x 3 (87L) Single Fin
9'6 x 23 3/4 x 3 1/8 (92L) Single Fin

This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.

Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance.  Tri-fin set-up.

The fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing.

FINS: 3 Fins supplied – Futures template F6

CONSTRUCTION

Mick Fanning Beastie Epoxy-Lam - Jade

Beastie Epoxy Lam – The Ultimate Funboard for Progression & Versatility

The Beastie Epoxy Lam is engineered to be the next-level funboard, making every wave accessible and every ride smooth. Its clever volume distribution and generous outline create a super stable platform, perfect for building skills or as a playful longboard alternative.

Why Choose the Beastie Epoxy Lam?

• Ample, well-balanced volume for stability and effortless paddling, ensuring easy wave-catching and comfort in the lineup
  
  
• Wide outline provides a forgiving, confidence-boosting platform that’s great for progression or relaxed cruising
  
  
• Wide tail enhances lift and acceleration in weak waves, creating a substantial sweet spot for take-offs and stylish turns
  
  
• Durable Epoxy Lam construction delivers a lightweight, resilient board that performs session after session
  
  
• Adaptive FCSII/Futures fin system with thruster setup lets you fine-tune the ride for evolving styles and surf conditions
  
  
• Supplied with Thruster FCSII Softflex or Futures F8 Safety fins for versatile performance and safety

Sizing and Volumes

6’0” x 20” x 2 5/8” (37.01L)

6’6” x 22” x 2 3/4” (46.19L)

7’0” x 22” x 2 3/4” (50.05L)

7’6” x 22 5/8” x 2 7/8” (57.51L)

8’0” x 22 5/8” x 2 7/8” (61.52L)

8’6” x 24” x 3 1/2” (87.03L)

9’0” x 24” x 3 1/2” (91.92L)

Key Specs

• Construction: Epoxy Lam
  
  
• Rocker: Medium
  
  
• Bottom contours: Single to double
  
  
• Outline: Wide round tail
  
  
• Fin system: FCSII/Futures – Thruster
  
  
• Fins supplied: Thruster FCSII Softflex / Futures F8 Safety

Benefits

• Reliable platform for rapid progression and high wave count
  
  
• Wide tail adds lift and speed to weaker waves, keeping sessions fun even on smaller days
  
  
• Durable epoxy build handles the demands of regular surf and travel
  
  
• Adaptable for all levels—welcoming for learners, lively for advancing surfers
  
  
• Versatile sizing to suit groms, adults, and everyone in between

Who’s it For?

Surfers who want to progress quickly and catch more waves, without sacrificing stability or fun

Anyone looking for a funboard that doubles as a longboard alternative

Riders of all skill levels who value durability, comfort, and adaptability in their board

The Beastie Epoxy Lam is your everyday ticket to easier wave-catching, stable rides, and unstoppable surf enjoyment—no matter where your progression takes you.

The Volume Plus takes the trend for high volume wide boards into the Funboard model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.

These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.

Torq's fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing

Torq Mod Fun - 7'6"

Torq Mod Funboard Volume+ - 7'8"

The Volume Plus takes the trend for high volume wide boards into the midlength model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.

These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board..

All sizes come as 3 fin Thruster set up, except the Wood design as 2+1.

O&E Happy Hour Epoxy Soft Surfboard - 7'6 

Our happiest soft board yet, the Happy Hour Epoxy Soft 6'0" is designed for both fun and performance, making wave catching and manoeuvrability a breeze. Constructed using a lightweight EPS core, epoxy glass and soft deck and bottom, the narrower tail shape and fuller nose combine to create a super versatile soft board. The different fin combinations allow the board to be surfed in a variety of performance levels and waves.

OUTLINE:  Narrower pin tail for performance. Wider nose area for easy paddling.

ROCKER:  Minimal rocker for easy paddling to catching waves. 

DECK: Textured EVA

BOTTOM: HDPE

FINS (SUPPLIED) : 1x 8" Polycarbonate centre fin
                              2x 4" Polycarbonate side fins

FINS BOX:   Centre = 10" Box
                  Side Fins = Single Tab X4 (Compatible with Future Fins)

DIMENSIONS: 

• 6'0" X 21" X 2 3/4" (37.6L)
  
  
• 6'6" X 21 5/8" X 2 7/8" (43.4L)
  
  
• 7'0" x 22" x 3 1/8" (52.4L)
  
  
• 7'6" X 22 1/4" x 3 1/4" (59L)
  
  
• 8'0 x 22 1/2 x 3 1/8 (62L)
  
  
• 8'6 x 22 3/4" x 3 3/8" (71L)

The Volume Plus takes the trend for high volume wide boards into the midlength model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.

These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.