Yeti Yonder 600ml Water Bottle

With Yonder Chug Cap

This 600 ml water bottle is ultra-light, perfect for short hikes and everyday use.

WHERE ULTRA-LIGHT MEETS ULTRA-DURABLE
If you can get there, now your water can too. The Yonder™ 600 ml Water Bottle is so light, you'll barely notice it in your pack. And it's shatter resistant, you won't have to worry about banging it against a few rocks. Yonder™ Bottles feature a BPA-free material with 50% recycled content, and the 100% leakproof Yonder™ Cap features our intuitive two part system. Spin the top off when you need a drink from the controlled spout, twist off the bottom when you’re ready to refill or wash it.
Please note: Do not use this Yonder™ Bottle and Cap with hot, or carbonated beverages or use as storage for food or perishables. 50% recycled content excludes Yonder™ Cap.

BPA FREE BOTTLE WITH 50% RECYCLED CONTENT
For a bottle that’s durable, safe, and doing its part toward YETI sustainability goals. 50% recycled content excludes Yonder™ Cap

DISHWASHER SAFE
Because no one needs more work to do

100% LEAKPROOF
Carry it with confidence

CLIP-ON CARRY
Slip it through a backpack strap or clip it onto a carabiner to take water just about anywhere

LIGHTWEIGHT
50% lighter than Rambler® Bottles

Compatible with Yonder™ Tether Cap and small Bottle Sling (both sold separately)

Yeti Yonder 750ml Water Bottle

With Yonder Chug Cap

The 750ml water bottle is ideal for day hikes and packing light.

YETI WENT LIGHTER SO YOU COULD GO FARTHER.
If you can get there, now your water can too. The Yonder™ 750mL / 25oz Water Bottle was strategically engineered to be both lightweight and virtually shatter resistant, allowing you to haul essential hydration further and higher. Plus, our water bottle is made of durable and safe BPA-free material. But a bottle is only as good as its cap, which is why the 100% leakproof Yonder™ Cap features our intuitive two-part system. Spin the top off when you need a drink from the controlled spout, twist off the bottom when you’re ready to refill or wash it. Please note: Do not use this Yonder™ Bottle and Cap with hot, or carbonated beverages or use as storage for food or perishables.

BPA-FREE
While staying durable and safe.

DISHWASHER SAFE
Because no one needs more work to do.

100% LEAKPROOF
Carry it with confidence.

LIGHTWEIGHT
50% lighter than Rambler® Bottles

Compatible with small Bottle Sling

Creatures Icon Leash 6'

Icon is reliable and uncomplicated. Inspired by Creatures beginnings of no nonsense, straight forward products that work. Our Icon 6 Leash is designed for small to medium waves. 

Double Stainless-Steel Bearing Swivel

DNA Flex Mould

2 Year Warranty

Surefire Leash Release

LEASH LENGTH: 6’ / 1.8mm

CORD THICKNESS: 1/4” / 6mm

CUFF WIDTH: 1.5” / 38mm

RAILSAVER WIDTH: 1” / 25mm

Yeti Yonder 1.5 Litre Water Bottle

With Yonder Chug Cap

The 1.5 litre plastic water bottle is ideal for bringing a day’s worth of water

ALL-DAY HYDRATION AT ITS LIGHTEST
If you can get there, now your water can too. The Yonder™ 1.5 L / 50 oz Water Bottle was strategically engineered to be both lightweight and shatter resistant, allowing you to bring your most important resource to new heights while keeping your pack light. Yonder™ Bottles feature a BPA-free material with 50% recycled content, and the 100% leakproof Yonder™ Cap features our intuitive two part system for easy chugging. Spin the top off when you need a drink from the controlled spout, twist off the bottom when you’re ready to refill or wash it. Please note: Do not use this Yonder™ Bottle and Cap with hot, or carbonated beverages or use as storage for food or perishables. 50% recycled content excludes the Yonder™ Cap.

BPA FREE BOTTLE WITH 50% RECYCLED CONTENT
For a bottle that’s durable, safe, and doing its part toward YETI sustainability goals. 50% recycled content excludes Yonder™ Cap.

100% LEAKPROOF
Carry it with confidence

DISHWASHER SAFE
Because no one needs more work to do

CLIP-ON CARRY
Slip it through a backpack strap or clip it onto a carabiner to take water just about anywhere
Made from BPA-Free 50% recycled plastic

LEAKPROOF
100% leakproof

LIGHTWEIGHT
50% lighter than Rambler® Bottles

Compatible with Yonder™ Tether Cap (accessory sold separately)

O&E Regular Diamond Flex SUP / Longboard 9 ft Moulded Leash

Get cruising with the Diamond Flex SUP / Longboard Regular Leash in 9ft. Featuring our Diamond Flex Technology for controlled stretch and strength, this leash is suited for flat water paddling and small SUP waves or surf up to 7 foot on your Longboard. 

Wave Size: SUP 4ft (1.2m)
Cord Ø : 1/3" (8mm) 
Strap : 50mm Padded

DIAMOND-FLEX MOULD
Advanced mould design with flex diamonds. Provides controlled flex and strong transition from mould to urethane.

ANTI-SLIP STRAP
Textured non slip neoprene layered on top of padded comfort strap. Lightweight, secure fit.

ORIGINAL DETACHABLE RAILSAVER
The original railsaver system designed by O&E, with sewn in anchor cord. Protects rails and is easily detached.

NEW FORMULA CONTROLLED-STRETCH URETHANE
The larger the wave, the more stretch which keeps your board at a safe distance away. Premium grade quality urethane developed by the world's leading manufacturer.

FLEX NECK STRAP PLUG
Allows 360º movement of leash and offers more comfort when leash is under load.

SAFETY RELEASE PULL TAB
Easy to see quick release pull tab. Essential when surfing big waves and reefs.

PLUG BUDDY
Another O&E first. Ensures leash string can be easily slipped through surfboard plug.

Note : Detail Images may show other colourways

WAVE SIZE :SUP 5ft (1.5m)
Longboard 8ft (2.4m)
CORD DIA.: 1/3" (8mm)
STRAP : 50mm Padded
Double Swivel

Fcs2 Performer Glass Flex Tri 

Reliable all-round fin for a diverse range of surfers, conditions and board types.
Well proportioned template with Inside Foil Technology (IFT) delivering a balance of drive, pivot and hold.
Designed for surfers wanting a combination of speed and maneuverability with flow between turn

Ideal Conditions.
A wide range of conditions from beach breaks to point breaks.

Board Types.
Recommended for all board types.

Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

Fin Specs.

Base: 4.25" / 108mm
Depth: 4.43" / 112mm
Area: 14.03"2 / 9054mm2
Sweep: 33.7o
Foil: Inside

Glass Flex

Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.

X-SMALL Under 55Kg
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg 
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg 

FCS II SINGLE FIN

Fcs2 Carver Performance Glass Quad Size - Small

Powerful, drawn-out turns. Excels on open face waves.

OVERVIEW

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and and draw out their turns.
• Two Quad Rear fins.

Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

FIN MATERIAL

PERFORMANCE GLASS

Fin Specs

Base: 3.86 in. 98 mm
Depth: 3.93 in. 100 mm
Area: 11.07 in.² 7140mm²
Sweep: 33.2º
Foil: 50/50

FCS Clique PG Longboard Fin 8"

Versatile, well balanced template. 2+1 setup compatible.

• Versatile, well balanced template.

• Shorter base makes it highly manoeuvrable.

• Slim tip provides a high level of forgiveness out of the turn.  

• Suited to traditional and performance longboards.

• 2 + 1 Compatible.

• Designed to be used in most existing FCS Longboard boxes. No new box required.

Performance Glass

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

• No need for a plate and screw.
• Ability to adjust your fin position in the box mid surf.
• Easily insert or remove your fin in seconds. No fin key required.
• Designed to be used in most existing Longboard boxes. No new box required.

Versatile, high performance fin. Connect turns and move up and down the board. Plate & screw fastening.

Overview

• Neutral, well balanced template.

• Versatile, high performance Longboard (LB) fin for all conditions. 

• Offers a combination of drive, speed and response for modern longboarding.

• Turn and Connect: Seamlessly connect turns and move up and down the board.

• 2 + 1 Compatible.

• Plate & screw fastening.

FCS II Flow Performance Glass 8.5" Longboard Fin - Sand

Single fin designed for controlled flowing turns.

Overview

• Drive hard off the bottom and perform controlled flowing turns.
• Neutral fin with elongated base.
• Provides excess drive and hold for longer turns and trim stability.
• Suited to a more laid back style of longboarding.
• Designed to be used as a single fin.

Performance Glass

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

• No need for a plate and screw.
• Ability to adjust your fin position in the box mid surf.
• Easily insert or remove your fin in seconds. No fin key required.
• Designed to be used in most existing Longboard boxes. No new box required.

Versatile, high performance LB fin for all conditions. Seamlessly connect turns and move up and down the board.

Features.
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.  
Offers a combination of drive, speed and response for modern longboarding.
TURN & CONNECT (Seamlessly connect turns and move up and down the board). 
2 + 1 Compatible.
Suits most LB’s with hard edges.
Designed to be used in existing FCS Longboard boxes. No new box required.

Fin Material.
Performance glass.

Specs.
CONNECT 6"
Base: 4.27" / 108mm 
Depth: 6.00" / 152mm 
Area: 17.65" / 11390mm²
Sweep: 33.7º
Foil: 50/50

CONNECT 7"
Base: 4.99" / 126mm 
Depth: 7.01" / 178mm 
Area: 24.05" / 15518mm²
Sweep: 33.7º
Foil: 50/50

CONNECT 8"
Base: 5.64" / 143mm 
Depth: 7.96" / 202mm 
Area: 30.71" / 19812mm²
Sweep: 33.7º
Foil: 50/50

CONNECT 9"
Base: 6.43" / 163mm 
Depth: 9.03" / 229mm 
Area: 39.91" / 25748mm²
Sweep: 33.7º
Foil: 50/50

CONNECT 10"
Base: 7.13" / 181mm 
Depth: 10.01" / 254mm 
Area: 49.06" / 31653mm²
Sweep: 33.7º
Foil: 50/50

Fcs2 Thomas Bexon Signature Fin - Volan

 Thomas Bexon's new signature single fin holds the perfect amount of release and drive.

Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.

Speed & tight turns. Ideal for beach breaks.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

Speed, flow and response with added control. Excels in critical conditions.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for a balance of speed, flow & response with added control.
• Oversized, all-round template with a fuller tip.
• Ideal for surfers who like to attack the wave and perform aggressive turns.

Ideal Conditions

• A wide range of conditions, particularly good in critical overhead waves.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Accelerator: Find Control. Speed, flow and response with added control.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg

Powerful, drawn-out turns. Excels on open face waves.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

The Huevo, in SLX construction, is a classic hybrid surfboard that incorporates the best of both the shortboard and longboard. It’s round nose and fuller tail gives plenty of floatation and makes paddling a breeze. With its shorter length and 2 + 1 fin set up makes for fast responsive turns and manoeuvrability.

OUTLINE: Its fuller outline with the wide point slightly forward of centre means you can trim and glide forward on the board, adds to the great paddle power and to the stability and flow, while its round tail makes for smoother transitions between turns.

ROCKER: With emphasis on being an all rounder it has a low to medium rocker, this is why you will find this board paddles with ease and flows through those dead sections with minimal effort. A slight lift in the nose makes those late take offs easier and the slight lift in the tail makes for nice drive through your turns.

CONTOURS: A nice classic slight rolled Vee from nose to tail makes it effortless for those rail to rail transitions, while the stance is anywhere on the board, however getting back over the fins the board will turn on a dime.

PERFORMANCE: Think summer grovely beach breaks when you don’t want a Longboard or it’s too small for your Shortboard or winter reefs and perfect points. This board can handle anything from waist to double overhead and any ability from beginner to advance. Enjoy

SPECIFICATIONS

NOTE: rider weight is based on board volume and intermediate rider skill level.

TECHNICAL INFORMATION

Construction SLX Epoxy Construction

SLX construction produces a controlled flex pattern by combining the versatility of epoxy materials with the added advantage of reduced weight. All SLX boards have an EPS core with a high-grade timber stringer, which is laminated by hand using epoxy resign, biaxial fiberglass and a specialized construction process.Featuring a high strength-to-weigh ratio, and designs CNC milled directly from the shapers files. SLX boards feel light, responsive and are very sensitive under your feet. These boards are extremely versatile, easy to ride, and can be used in wide variety of conditions.

Board Contours Vee Concave

Rail Neutral Rail

Wave Height 1-8ft Waves

Surfer Skill Level Beginner, Intermediate, Advanced