Patagonia WinWin Black Hole Cube Medium Organiser - 6L

Patagonia Women's Long-Sleeved RØ Top - Black

This long-sleeved surf shirt is made with light, fast-drying NetPlus® 84% postconsumer recycled nylon made from recycled fishing nets to help reduce ocean plastic pollution/16% spandex with four-way stretch and 50+ UPF sun protection. Worn in or out of the water, it offers reliable protection from sun and wind. Fair Trade Certified™ sewn.

Rip Curl Girls Dawn Patrol Spring Suit Black/Navy

Features

• Back zip
• E5 neoprene
• E-stitch high stretch seams
• Internal key pocket
• 1.5 mm Thick

A stronger, more reliable tie down system.

Overview

The FCS D-Ring tie down system is the more reliable soft rack system way for your boards. No moving parts means no chance of mechanical failure. Built for the hardcore surfer and adventurer.

Features

• Fits 1-3 boards to most cars, vans, 4WD's without roof racks
• Aerodynamic, non rolling pads featuring high density foam shield. Each pad 440mm width
• Heavy duty 32mm webbing and 1000D fabric foam covering
• Tough die-cast metal buckles with numbered "how to" steps
• Comes with convenient storage pouch

FCS II Reactor Quad Rear PC Fin Set - Charcoal/Black

FCS II Performer Quad Rear Fin Set - Small

The G Bomb Long Pant is a women's wetsuit pant for surfing, designed using 100% 1mm E4 neoprene for total comfort and finished with E-stitch high stretch seams for flexibility in the water. On trend and a must-have!

Features
100% E4 neoprene.
E-stitch high stretch seams.

Fcs2 Carver Perfomance Glass Quad Side Small 

Side byte set designed for 2+1 setups on longboards and SUP's.

• Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
• Neutral, well balanced template.

• Glass Flex

  Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.

  Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Suitable for longboards, SUP's or as shortboard quad rears.

Manta - Clone Bodyboard Swimfins

MANTA CLONE BODYBOARD SWIMFINS - Comfort and power combined

Designed with special stiffened rails but flexible blade to give the very best

performance characteristics - special Manta mould. Unbeatable swimfin proven

for over 20 years. Wide, comfortable foot pocket.

FLOATING FINS

• Stiff upper Blade for powerful propulsion.
  
  
• Dual compound pro fins for control and performance: Ultra soft foot pocket with rigid blade.
  
  
• Double drainage vents.
  
  
• High quality Malaysian rubber.
  
  
• Floating swimfins.
  
  
• Tight rail control edges for balanced kicking and rudder control.
  
  
• Anti slip grips. 

SIZE GUIDE:

SIZE              X/S     SM     M     M/L     L     X/L

AUS/UK       3-5     4-7   6-9   7-10  8-11 9-12

USA             3-6     5-8  7-10  8-11  9-12 10-13

We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom integrates our 2.0 Sole in the cleanest, simplest package that essentially disappears on your feet. If you want the world's lightest, barely-there boot, the 3mm Custom 2.0 is your answer. Check the tech:

3D-Molded Natural Rubber Sole

Like all of our new 2.0 Series boots, the 3mm Custom 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.

Custom-Fit 2.0 Thermofoam Sole 

Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.

Upgraded Neoprene Lining with Tatex Flex-Spine and Plush Interior

Updates to the Custom 2.0 aren't limited to the sole. We've also upgraded the outer lining material to the same one we use on the Custom Pros, improving durability and minimizing water absorption. Further fortifying the exterior is our exclusive Tatex Flex Spine. The Flex Spine stiffens the back of the boot to act as a shoe-horn and also provides a sticky surface to grab your wetsuit leg and prevent flushing. The inside is lined with a plush quick-dry lining material for max airflow, improving warmth and comfort.

EZ-O Cuff with Overkill Seams

Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with Liquid Seam Seal for maximum durability and longevity.

Reinforced Stealth-Loop

To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption. 

Split-Toe Heat-Booster Socks in the Box

The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:

1. Makes boots easier on-off and reduces stress on seams.
2. Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
3. Adds warmth to extend session length and comfort.
4. Absorbs excess water from flushing to prevent puddling in the boots.
5. Absorbs bacteria to reduce bootie-stink.
6. Machine wash and dry for convenience.

Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more. 

FCS2 Seaside Quad is Rob Machado’s first signature FCS II fin template. Designed specifically for his Firewire Seaside model, this semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.

GEOMETRY

This quad set is based on Rob’s signature FCS II RM Keel twin template that’s set for release later in 2019. Essentially, the two keels have converted it into four fins by extracting area from the back of the keel and re-shaping it into a mini trailer fin.

The trailer has a low profile but is robust, while the side fins retain the look of a traditional keel with a narrower profile. Overall, this high-area quad set has soft, smooth curves that directly translate to how it feels in the water.

PERFORMANCE

Designed specifically to compliment Rob’s Seaside Firewire model. Overall this set has lots of surface area offering a trustworthy feel with an underlying level of response and performance.

The side fins produce an abundance of drive and forward acceleration. The small trailer fins (quad rears) allow you to break the line and turn in a tight arc when the wave presents steeper and more critical opportunities.

Ideally suited to smaller, weaker waves, this set is adaptable to many higher volume hybrid surfboard models.

CONSTRUCTION

Performance Glass fins are machine cut from layers of solid fiberglass. These fins are stiff and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

Creatures Fish Icon Lite Boardcover

The Creatures Fish ICON Lite Boardcover is designed for wider fun boards. The single board capacity covers are perfect for in-home storage or in-car transport to and from the beach.

Features: 

• FOAM Protection - 3mm closed cell
  
  
• Durable matte black tarpee
  
  
• Reinforced 420D Fabric tail panel
  
  
• Shoulder strap
  
  
• Marine-Grade corrosion resistant zip
  
  
• Industry-leading 2-year warranty

Xcel Drylock 18 1/2" Boardshorts - Black 

Xcel has put the best technology and comfortable design to keep you mobile while surfing.

• Griplock Waist Band = P/U “Anti Slip” Waist Band
  
  
• 4-way Ultra Stretch
  
  
• 4-way Channel Flex Action Panel
  
  
• Welded Seam Technology 
  
  
• Lasso Waist Lace
  
  
• Side Welded Pocket with Key Loop
  
  
• Laser Cut Leg Hem - no chafe
  
  
• Board Shorts