FCS II Connect PG Longboard Fin

O'Neill Reactor II Long Sleeve Crew Top 1.5mm - Marine/Black/Black

• UltraFlex DS Neoprene
  
  
• FlatLoc Seams
  
  
• Crew Neck
  
  
• Seamless Paddle Zones
  
  
• 1.5mm

Patagonia P-6 Logo Uprisal Hoody - Black

This 95% recycled hoody is made using 14.9 plastic bottles and .82 pounds of cotton scrap, saving 184 gallons of water versus a conventional cotton hoody. Fair Trade Certified™ sewn.

The P-6 Logo Uprisal Hoody is made from heavier-weight recycled cotton/postconsumer recycled polyester/spandex fleece fabric with a brushed back for cozy warmth. Classic pullover hoody styling with a kangaroo-pouch handwarmer pocket to hold essentials. Original artwork is screen-printed using PVC- and phthalate-free inks. Fair Trade Certified™ sewn.

Features

Champion-weight fabric with soft brushed back for a classic heavyweight feel

Classic pullover hoody with a kangaroo-pouch handwarmer pocket

Fair Trade Certified™ sewn

Screen-print inks are PVC- and phthalate-free

Patagonia original art

726 g (25.6 oz)

Materials

10.9-oz 47.5% recycled cotton/47.5% postconsumer recycled polyester/5% spandex fleece.

Fair Trade Certified™ sewn

Patagonia Regenerative Organic Cotton Crewneck Sweatshirt - Ink Black

A responsible essential unisex crewneck sweatshirt made of 100% Regenerative Organic Certified™ cotton from farms working toward the highest organic standard, which aims to rehabilitate soil, respect animal welfare and improve the lives of farmers. These practices reduce greenhouse gas emissions and could help trap more carbon than conventional agriculture. Fair Trade Certified™ sewn.

Patagonia Long-Sleeved RØ Top - Ink Black

This surf top is made with light and fast-drying NetPlus® 84% postconsumer recycled nylon made from recycled fishing nets to help reduce ocean plastic pollution/16% spandex. It offers excellent protection from sun and wind, and next-to-skin comfort while paddling. Fair Trade Certified™ sewn.

Yeti Rambler Half Gallon Jug - Core Colours

[1.9 litres]

ALMOST 24 HOURS WORTH OF WATER TO FOLLOW YOU FROM THE GYM TO THE RANCH AND BACK HOME.

With rugged construction, FatLid™ insulation and a stainless-steel handle, the Rambler® Half Gallon Jug is built to take on the wild. Whenever and wherever you need it, count on an ice-cold (or piping hot) sip from your Rambler® Jug to come to the rescue. Like the entire Rambler Family, this reusable jug and its lid are easy to clean and dishwasher safe. Available in stainless and DuraCoat™ colours.

Please note: Do not use the Rambler® Jug Lid with carbonated beverages or for storage of food or perishables.

FATLID™ INSULATION

One inch of lid insulation keeps temperature retention on lock, and the MagCap Dock harnesses the power of magnets to keep your MagCap close by. The stainless steel handle with rubber grip makes for sturdy, easy transport.

18/8 STAINLESS STEEL

Made with kitchen-grade stainless steel, so they’re puncture- and rust-resistant.

DOUBLE-WALL VACUUM INSULATION

Keeps cold drinks cold and hot drinks hot until the last sip.

NO SWEAT DESIGN

Keeps finger dry and free from frostbite

DISHWASHER SAFE

Because no one needs more work to do.

External dimensions

14.9w x 25.7h cm

Empty weight

1.7 kg

Capacity

1.9 litres

Patagonia Boardshort Logo Uprisal Hoody - Ink Black

Our Boardshort Logo Uprisal Hoody is made with 100% recycled knit fleece that has a brushed interior and natural stretch. By utilizing fabric scraps and recycled bottles, this garment reduces our reliance on virgin raw materials. Made in a Fair Trade Certified™ factory.

Patagonia Women's Stretch Hydropeak Surf Short - Ink Black

Designed for comfort and athletic freedom of movement both in and out of the water, these versatile, fast-drying surf shorts are built from superlight 87% recycled polyester/13% spandex with four-way stretch and a durable water repellent (DWR) finish made without perfluorinated chemicals (PFCs/PFAS). Inseam is 3½". Made in a Fair Trade Certified™ factory.

We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom Pro 2.0 integrates our new 3-Point Strap with the 2.0 Sole for precision fit and instant response. We've also upped the warmth even more with our new metal-grid Thermal Rebound plush lining. Simply put, our Custom Pro 2.0 is the best watersports boot in the world. Full stop. Here's why:

3D Molded Natural Rubber Sole

Like all of our new 2.0 Series boots, the 3mm Custom Pro 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.

Custom-Fit 2.0 Thermofoam Sole 

Our patented heat-moldable 2.0 Thermofoam sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.

3-Point Strap with Floating D-Ring

Another Solite innovation, our 3-Point Strap anchors under both the arch and heel on the inside of the foot, and under the heel on the outside of the foot. When the strap is tightened, the boot snugs up evenly under the arch and through the rear of the boot, providing instant response and slop-free fit for all arch and ankle profiles. Our Floating D-Ring on the strap isn't stitched in place, allowing it to "float" naturally to the optimal position on your foot. Our 3-Point Strap is also 100% Tatex-coated for extra durability and zero water absorption. 

Thermal Rebound Lining

The Custom Pro 2.0 features a unique Thermal Rebound plush, quick-dry interior lining material in the upper. This material features a thin, flexible metallic grid-layer between the neoprene and the outer lining, reflecting body heat back to the skin for enhanced warmth. Lab tests on the Thermal Rebound laminate show an increase in insulation exceeding 10%, which extends your sessions and increases your odds of getting the wave of the day.

Tatex Flex-Spine

The calf area features our exclusive Tatex Flex-Spine. The Flex-Spine serves three distinct purposes:

1. Enhances durability with an abrasion resistant rubbery surface.
2. Reduces stretch to act like a shoe-horn, making it easier to slide your heel into the boot.
3. Provides a sticky external surface to grab your wetsuit leg and prevent flushing.

EZ-O Cuff with Overkill Seams

Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.

Reinforced Stealth-Loop

To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption. 

Split-Toe Heat-Booster Socks in the Box

The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:

1. Makes boots easier on-off and reduces stress on seams.
2. Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
3. Adds warmth to extend session length and comfort.
4. Absorbs excess water from flushing to prevent puddling in the boots.
5. Absorbs bacteria to reduce bootie-stink.
6. Machine wash and dry for convenience.

Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more. 

O'Neill Girl's Bahia  Long Sleeve Spring Suit Wetsuit 2mm - Wildflower/Black

FSC II Machado Single Performance Glass 7"

Rob Machado's new 7" single fin provides speed through open sections and pivot in the pocket.

Designed specifically for the rounded template of the Firewire Sunday, this fin will provide speed through the flat and pivot where you need it.
Wide base that gives drive on open sections and a shorter height that makes it easy to maneuver.
Firewire Sunday - Surfed as both a short board or mid-length, Rob Machado template allows long drawn out turns
FCS II Rob Machado Sunday Single side bytes compatible 

Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

Billabong Salty Dayz Toddlers Long Sleeve Springsuit - Black Pebble

Protect yourself from the morning chill, mid-day sun and “basic” style with the Billabong Salty Dayz Long Sleeve Springsuit for girls.

The Surf Capsule Collection long sleeve spring suit combines active swimwear lines and allover print with the functionality and warmth of a wetsuit.

A half zip at center front allows for control over how much added heat you need.  With Billabong's original prints, and now recycled, the 1mm girl’s wetsuit is made from premium Recycled Superlight neoprene, a lightweight foam made partially from recycled car tires and neoprene scraps, topped with 100% recycled Superflex jersey, creating flexibility alongside sustainability.

The Salty Dayz Springsuit for girls is finished with non-toxic water based adhesive and flatlock stitch construction for comfort and durability.

NOTE -IMAGES ARE FOR TEEN SIZING, SIZE 2-6 ARE FOR TODDLERS

O'Neill Reactor II Long Sleeve Crew Top 1.5mm - Black/Gunmetal/Gunmetal

• UltraFlex DS Neoprene
  
  
• FlatLoc Seams
  
  
• Crew Neck
  
  
• Seamless Paddle Zones
  
  
• 1.5mm

Creatures Icon Longboard Lite Board Bag

The Longboard Icon Boardcover is designed for economic day-to-day use. The single board capacity covers with fin slot are perfect for in-home storage or in-car transport to and from the beach.

Features

Heavy Duty 900D Fabric Top

Heavy Duty Reflective Tarpee Bottom

5mm Closed Cell Foam Protection

Reinforced 900D Fabric nose panel

Foam Padded handle - for carrying comfort

Stash Shoulder strap

External & Internal Storage Pocket

Industry-leading 2-year warranty

O'Neill Hyper Fire No Sleeve Vest

The Hyper Fire Sleeveless vest is perfect for under your wetsuit for extra warmth when the ocean is cold and with board shorts when it is warm. The Firewall is quick drying and super comfortable on your body.

Zipperless

TB4

TB4Firewall

Flatlock Seams

Minimal seam design

1mm

Billabong Absolute Natural Short Sleeve Wetsuit Top 2mm

Fabric: 100% partially recycled superflex jersey exterior fabric

Silicon Stretch interior fabric

Neoprene foam type: Superlight Foam, partially recycled, Oyster Shell Content

Body type: Short sleeve jacket

Thickness: 202mm thickness

Entry system: Back zip entry system

Exterior Seam Detail: Flatlock stitched seams that are locked but not sealed

Materials [Main Fabric] 87% Recycled Polyester, 13% Recycled Elastane