Medium

FCS II Al Merrick PC Tri-Quad Fin Set - Cobalt

Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.

Overview

Al Merrick's template is designed for radical, progressive surfing.

The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.

Tri/Quad (5 fin) se

Ideal Conditions

Hollow steep waves, punchy beach breaks.

Board Types

Designed to fit the FCS II Fin System.

Performance boards with deep concaves and moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

$209.00

Fcs2 Mb Pc Carbon Med Blue Tri Set

FCS II Matt Biolos Carbon Tri Fin Set- Medium

Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.

Overview

The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
Sitting in the reactor family, the MB is considered a high-performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.

Ideal Conditions

A wide range of conditions, particularly good in critical overhead waves.

Board Types

Designed to fit the FCS II Fin System.
Performance shortboards and hybrid models.

Fin Family

Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favoured by power surfers who like to perform explosive turns on critical parts of the wave.

SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg

Fin	Base (inches)	Base (mm)	Depth (inches)	Depth (mm)	Area (inches)	Area (mm)	Sweep Deg°	Foil
SML	4.19	106.3	4.46	113.2	13.71	8847	32.0°	Flat
MED	4.30	109.2	4.59	116.4	14.49	9347	31.7°	Flat
LRG	4.41	111.9	4.74	120.3	15.26	9847	32.9°	Flat

$209.00

Patagonia Houdini Stash 1/2 Zip Pullover - Seabird Grey

A hoodless, highly packable half-zip wind shell for take-it-anywhere weather resistance on high-output days. Made of 100% recycled nylon ripstop, with front and back vents. Made in a Fair Trade Certified™ factory.

Featherweight 100% Recycled Nylon Shell
Featherweight 100% recycled nylon ripstop with a DWR (durable water repellent) finish that's made without PFCs (perfluorinated chemicals) to resist light moisture

Side Pockets
Two side pockets with hook-and-loop closures are large enough to hold a phone and other small items on the go; the jacket stuffs into either pocket

Three Vents
Overlapping slits on the left and right chest, and a slit on the center back promote airflow

Zipper Garage
There's a zipper garage for extra comfort

Supporting the People Who Made This Product
Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labor

Country of Origin
Made in Vietnam.

Weight
105 g

Materials
1.2-oz 100% recycled nylon ripstop with a DWR (durable water repellent) finish that's made without PFCs (perfluorinated chemicals)

Fabric is certified as bluesign® approved

Made in a Fair Trade Certified™ factory

$209.00

Patagonia Women's Maipo 7/8 Stash Tights - Black

These versatile, lightweight, performance-oriented, fully featured tights are made for the sort of multisport activity that Chile's Maipo Valley is known for—from running to climbing to hiking to yoga, plus everything in between. They're crafted with 81% NetPlus® postconsumer recycled nylon made from recycled fishing nets to help reduce ocean plastic pollution/19% spandex knit with miDori™ bioSoft for added wicking and softness, and HeiQ® Pure odor control. Inseam is 26". Made in a Fair Trade Certified™ factory.

Specs & Features

Soft, Wicking Fabric
The soft fabric provides fast-drying performance and is built with 81% NetPlus® postconsumer recycled nylon made from recycled fishing nets to help reduce ocean plastic pollution/19% spandex knit that's treated with miDori™ bioSoft for added wicking and softness, and HeiQ® Pure odor control

Fit Details
High-rise performance tights with a 7/8 length

Comfortable Waistband
Designed for optimal comfort and mobility with a folded-over front waistband and enclosed elastic in the back

Drop-In Side Pockets
Two drop-in side pockets easily fit a phone or other items on the go

Low-Profile Seams
Low-profile flatlock seams prevent chafing

Inseam Length
Inseam is 26"

Supporting the People Who Made This Product
Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labour

Country of Origin
Made in Sri Lanka.

Weight
173 g
Materials
6.3-oz 81% NetPlus® postconsumer recycled nylon made from recycled fishing nets to help reduce ocean plastic pollution/19% spandex knit with miDori™ bioSoft for added wicking and softness, and HeiQ® Pure odor control

Fabric is certified as bluesign® approved

Made in a Fair Trade Certified™ factory

Care Instructions
Machine Wash Warm, Do Not Bleach, Tumble Dry Low, Cool Iron

$209.00

Fcs2 Mick Fanning Pc Med Tri White

Overview

Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
This fin provides maximum drive and control.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

$209.95

FCS II Mason Ho Signature Fin

Mason Ho's Signature fin. Welcome to Mason's world, and welcome to Mason's new fin.

Overview

Mase is calling this his new magic fin!

The new Mason Ho signature fin is a mashup of different templates. We took influences from Kelly Slater's original K-3 and Mick Fanning's signature templates, then reworked the flex, foil and tip profile based on extensive testing and feedback from Mason himself.
This might just be the fin to rule them all...

Sitting in the Accelerator Family, this all-purpose, all-conditions fin will feel steady when driving into a turn, and fast and loose off the top. Explosive is another word to describe how this fin responds, and in this case, the personality of the M.Ho fin totally matches the creator and rider. Fast, Loose & Fun!

Mason's fin features a bevelled leading edge which allows for silky smooth transitions between turns. Performance Core + AirCore construction makes the fin a touch lighter, the flex a little stiffer and overall more reactive compared to standard PC construction, which is again suited to Mason's punk style of surfing.

This fin had a long development runway. Mason was after one fin he could use in his small wave rock-hopping fun boards right through to his big wave pipe guns, and it wasn't until he was totally satisfied that we pulled the trigger.

Welcome to Mason's world, welcome to Mason's new fin.

"The fins have been all time!!! Got some crazy waves at Ala Moana and got to push them hard as I could in the big bowl on some turns; full control off the bottom and nice and loose off the top. They went totally crazy in the pool as well, great projection on the air sections". Mason Ho

Features & Benefits

Broad Spectrum Performance Fin
2-20 feet. Shortboards, step-ups, and guns
Fast, loose, and steady

Ideal Conditions

Steady off the bottom, fast and loose off the top. Suited to a wide range of conditions, from small beachies to big bowling reef breaks. Ideal for surfers looking for a dependable, one-quiver fin.

Fin Family

Accelerator: Find Control. Speed, flow and response with added control.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)

Fin	Base (inches)	Base (mm)	Depth (inches)	Depth (mm)	Area (inches)	Area (mm)	Sweep Deg°	Foil
SML Side	4.25	107.9	4.40	111.8	14.06	9074	34.9°	Flat/Bev
SML Ctr	4.25	107.9	4.40	111.8	14.06	9074	34.9°	50/50
MED Side	4.37	111	4.53	115	14.88	9602	34.9°	Flat/Bev
MED Ctr	4.37	111	4.53	115	14.88	9602	34.9°	50/50
LRG Side	4.49	114	4.65	118.1	15.70	10130	34.9°	Flat/Bev
LRG Ctr	4.49	114	4.65	118.1	15.70	10130	34.9°	50/50

$209.95

O'Neill Hyperfreak TB3X Long Sleeve Wetsuit Jacket 1.5mm - Black

Feels like freedom. Claimed by O'Neill's test pilots to be the most comfortable, flexible wetsuits they've ever worn, by a mile. Featherlight pre-stretched TB3-X neoprene, combined with our hydrophobic super stretch TB3 neoprene. This exclusive technology allows you to perfrom at the highest level with construction so light, you'd swear you were surfing naked.

FEATURES
100% TB3-X Neoprene

Flatloc seams

Contortionist Seamless Shoulder

Reversible

Boardshort Connector

$219.00

O'Neill Hyperfreak Front Zip Long Sleeve Wetsuit Jacket 2mm - Black

O'Neill's Hyperfreak wettties are the best in the business when it comes to comfort, stretch and performance. They are super light weight, easy to get on and off thanks to their stretch and by far the most comfortable suit you can surf in.

Feels like freedom. Featherlight pre-stretched TB3-X neoprene, combined with our hydrophobic super stretch TB3 neoprene. This exclusive technology allows you to peform at the highest level with construction so light and comfortable, you'd swear you were surfing naked.

Featuring minimal seam design, unfinished cuffs, the lightweight, quality construction and attention to detail make this another team inspired favorite.

New for 2022,O'Neill's Hyperfreak wetsuits feature more sustainabily sourced materials.

Recycled TB3-X
MeshSkin Panels
Seamless Paddle Zones

Hyperfreak Series, Blue
Aqua Alpha Solvent Free Glue
Boardshort Connector
2mm

$219.00

Patagonia Men's Better Sweater 1/4 Zip Fleece - Stonewash

This warm, 100% recycled polyester 1/4-zip jacket combines a sweater-knit aesthetic with the easy care of Better Sweater fleece. It’s dyed with a low-impact process that significantly reduces the use of dyestuffs, energy and water compared to conventional dyeing methods. Fair Trade Certified sewn.

Features:

100% Recycled Polyester Sweater-Knit Fleece
Made with 100% recycled polyester knitted fleece with a fleece interior and heathered yarns
Quarter-Zip with Stand-Up Collar -Quarter-zip with zip-through stand-up collar
Raglan sleeves for mobility and pack-wearing comfort
Zippered Left-Chest Pocket
Skin-Friendly Cuffs and Hem. Shape-holding micropolyester-jersey trim at cuffs and hem resists abrasion
Flat-seam construction reduces bulk and helps eliminate seam chafe.
Supporting the People Who Made This Product -Fair Trade Certified™ sewn, which means the people who made it earned a premium for their labor

$219.00

O'Neill Hyper X Long Sleeve Crew Top 1.5mm - Black

The New HyperX crew is constructed with 100% Recycled TechnoButter 3X. This exclusive recycled technology allows you to perform at the highest level with construction so comfortable and light you can go beyond your surfing boundaries.

Zipperless

TBX3

High Performance Freedom

Flatlock Seams

Reversible

Boardshort loop holder

Seamless underarm panel

1.5mm

O'Neill Blue - uses recycled plastic, solvent free lamination, Dope-dyed yarn, recycled oyster shells and limestone as ingredient of neoprene.

$219.00

O'Neill Hyperfreak 1.5mm Long Sleeve Wetsuit Jacket - Gunmetal/Cadet

The HyperFreak Wetsuit Tops feature O'Neill's exclusive Technobutter3-X material, lighter and more buttery than ever - 20% lighter with 30% less water absorption than other premium neoprene. This TB3X is crafted using sustainable materials such as recycled plastic, oyster shells, car tyres, limestone neoprene, solvent-free lamination, and dope-dyed yarn. Enjoy next-level stretch and comfort that'll keep you surfing all day!

Pullover, zip-free

Core Insulation

Key Pocket

Seamless Paddle Zones

Reversible

Elastic System with Board Short Connector

Rash Protection

50+ U.P.F. Ultraviolet Protection

Flatlock Stitched Breathable Seams

Chest/ Back: TechnoButter 3

Arms/ Shoulders: TechnoButter 3X

Aqua Alpha Solvent Free Neoprene lamination

$219.00

Futures Control Eric Arakawa Signature

The EA Control Series, designed by Hawaiian shaper Eric Arakawa of Arakawa Designs, is a medium size thruster in the Rake template category. The solid Fiberglass construction is designed for stability in powerful waves and comes with the endorsement of one Hawaii’s most legendary modern craftsmen.

Template Category - Rake (drawn-out | drive)
Construction - Fiberglass
Ride Number - Speed Control – 2.9
Suggested Wave Type - Open face | Point-break
Size - Medium (125 – 175 lbs)

	Side Fins	Center Fin
Area	15.16	15.16
Height	4.57	4.57
Base	4.40	4.40
Angle	6.5
Foil	FLAT	SYMM

$219.00

Futures Ea Techflex Tri Set Grey

Futures EA Techflex Tri Set

Thruster / Medium / Rake Template

The EA Techflex, designed by Hawaiian shaper Eric Arakawa of Arakawa Designs, is a medium size thruster in the Rake template category. The Techflex construction and flat foil give this fin a stable feel, making it ideal for controlling speed in more powerful waves. Over 40 years of surfboard design won't do you wrong, trust Arakawa when the waves get interesting.

Template Category | Rake (drawn-out/drive)
Construction | Techflex
Ride Number | Speed Control – 3.1
Size | Medium (65 – 80 kg)

	Side Fins	Center Fin
Area	15.16	15.16
Height	4.57	4.57
Base	4.40	4.40
Foil	FLAT	SYMM

$229.00

XCEL Axis 2mm S/S Springsuit

XCEL Axis 2mm S/S Springsuit

Xcel’s reputation for exceptional product quality is a clear result of an unwavering dedication to research, development, and design innovation. With tropical to cold-water products for men, women, and youth, the brand stresses performance: maximum stretch and durability, and a fit that feels custom-made every time.

• Easy Access Back Zip Design
• 100% High-performance Stretch Throughout Exterior for Maximum Flexibility
• Engineered fit for Men & Women
• Eco-friendly Limestone Neoprene With Aqua Glue Process
• Comfortable and Durable Flatlock Lock Construction

$229.00

FCS II Filipe Toledo Tri Fins - Black Red

FCS II Filipe Toledo Tri Fins

Filipe's new design for Summer 21/22 has dropped!

Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.

Overview

Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
Updated PC construction featuring ultralight AirCore.

Ideal Conditions

A wide range of conditions, particularly good in critical overhead waves.

Board Types

Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)

$229.00

Fcs2 Fillipe T Pc Med Tri Black White

FCS II Filipe Toledo Tri Fins

Filipe's new design for Summer 21/22 has dropped!

Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.

Overview

Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
Updated PC construction featuring ultralight AirCore.

Ideal Conditions

A wide range of conditions, particularly good in critical overhead waves.

Board Types

Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)

$229.00

Fcs2 Julian Wilson Tri Fins - Black / White

Fcs2 Julian Wilson Tri Fins

Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.

"My fins feels sturdy, fast and predictable with great projection out of the lip, and plenty of control when pushing your board hard through a turn” – Julian Wilson

Overview

Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
Updated in PC construction featuring our ultralight AirCore.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

$229.00

Billabong Foil Back Zip Steamer 3/2 - Black

A surf essential with engineered quality, the Billabong 3/2 Foil Back Zip Full Wetsuit hits all the marks. Featuring premium, lightweight neoprene foam and durable Superflex fabric with silicon stretch, this men’s long sleeve wetsuit is constructed with stitched seams for the ultimate fit. Finished off with a back zip entry for a classic look throughout.

Exterior Fabric Type: Durable Superflex neoprene.
Neoprene Foam Type: Superlight Foam, Partially recycled.
Interior Fabric Type: Silicone Stretch.
Body Type: Long sleeve full wetsuit.
Thickness: 3/2mm.
Entry System: Back Zip.
Exterior Seam Detail: Flatlock stitch.
Internal Seam Detail: High stress point - reinforced melco spot tape.

Materials

80% Neoprene, 20% Nylon

$229.00

FCS II Filipe Toledo PC Aircore Tri Fin Set - Black

Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.

Overview

Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.

Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.

Updated PC construction featuring ultralight AirCore.

Ideal Conditions

A wide range of conditions, particularly good in critical overhead waves.

Board Types

Designed to fit the FCS II Fin System.

Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

Accelerator: Find Control. Speed, flow and response with added control.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)

Fin	Base (inches)	Base (mm)	Depth (inches)	Depth (mm)	Area (inches)	Area (mm)	Sweep Deg°	Foil
MED	4.41	111.9	4.54	115.2	14.93	9634	34.8°	Flat/Bev
LRG	4.52	114.8	4.66	118.2	15.71	10134	34.8°	Flat/Bev

$229.00

Patagonia Women's Synchilla Snap-T Pullover - Oatmeal Heather/Vessel Blue

Providing everyday warmth and comfort, this classic Patagonia pullover is made with 100% recycled Synchilla polyester fleece. Fair Trade Certified™ sewn.

Features

Midweight 100% Recycled Polyester Fleece - Made of warm, midweight 100% recycled polyester fleece

Stand-Up Collar and Snap Placket - Nylon trim on stand-up collar reinforces classic Snap-T four-snap placket

Yoke Seam and Chest-Pocket Flap - Yoke-seam detail with nylon chest-pocket flap and snap closure

Spandex Binding - Spandex binding at sleeve openings and hem

Hip Length

Supporting the People Who Made This Product

Fair Trade Certified™ sewn, which means the people who made it earned a premium for their labor

Country Of Origin

Made in Nicaragua.

Weight

363 g

Materials

Body: 8-oz 100% recycled polyester fleece

Placket, pocket and binding: 3.4-oz 100% nylon plain weave

Fair Trade Certified™ sewn

$229.00

Billabong Revolution Natural Jacket 1mm - Black

Stay warm and protected without the bulk in the Billabong 1mm Revolution Natural Wetsuit Jacket. Featuring 100% recycled PRO STRETCH fabric with Yulex Pure Stretch Natural Rubber neoprene, this Graphene-lined wetsuit jacket is zipperless for performance-enhancing comfort throughout. Topped with logo branding.

AIRLITE 4D 20% more stretch Neoprene

Foam Type: Yulex Pure Stretch Natural Rubber

Interior Fabric Type: Graphene Comp

Body type: Long Sleeve Jacket

Thickness: 101mm

Entry System: Zipperless Exterior

Seam Detail: B-Lock superflex stitch

$229.00

Patagonia Lightweight Synchilla SnapT Pullover - Endless Blue

A lightweight version of Patagonia's classic Snap-T® Pullover made with warm and durable midweight recycled polyester fleece. Fair Trade Certified™ sewn.

100% Recycled Midweight Synchilla® Fleece

Made with midweight Synchilla® 100% recycled polyester fleece that’s velvety smooth, wicks moisture and dries quickly.

Classic Snap-T Styling. The classic, pullover Snap-T styling includes a four-snap recycled nylon front placket for easy venting, a stand-up collar for soft warmth on your neck and Y-Joint sleeves for increased mobility
Left Chest Pocket - Left-chest patch pocket holds the day’s essentials; flap with a snap closure for security
Skin-Friendly Cuffs and Hem - Cuffs and hem have spandex trim to seal out cool air and feel soft and comfortable on the skin
Hip Length - Hip length provides additional coverage and pairs nicely with a hip belt or a harness
Supporting the People Who Made This Product - Fair Trade Certified™ sewn, which means the people who made it earned a premium for their labour
Country Of Origin - Made in Nicaragua.
Weight - 374 g

Materials -
Body: 8-oz 100% recycled polyester double-sided fleece with an anti-pilling finish
Placket and pocket: 4.5-oz 100% recycled nylon with a DWR (durable water repellent) finish
Pocket bags: 2.6-oz 100% recycled polyester brushed tricot

$229.00

O'neill Reactor 2 Full 3/2 Gun/mar M

Was:

$229.00

Now:

$119.00

Price:

$119.00

Patagonia Yulex Regulator Lite Long Sleeved Top

A stretchy, neoprene-free 1.5mm top built from 85% Yulex® natural rubber/15% synthetic rubber by polymer content; the natural rubber is from sources that are Forest Stewardship Council® certified by Preferred by Nature™. Best for water 65°–75° F/18°–23° C. Made in a Fair Trade Certified™ factory.

Made with Natural Rubber

Stretchy 85% Yulex® natural rubber/15% chlorine-free synthetic rubber by polymer content; natural rubber is FSC® certified by Preferred by Nature™

Solution-Dyed Recycled Nylon Linings

Stretchy, solution-dyed linings; interior is 100% recycled nylon, exterior is 83% recycled nylon/17% spandex

Water-Based Glue Is Solvent-Free

Linings laminated with water-based, solvent-free AquaA™ glue

Flatlock Seam Construction

Seams are sewn with flatlock construction for comfort and durability

Design Reduces Drag

Streamlined pullover design holds close to the body for reduced drag with maximum comfort and flex

Rubberized Waist Gasket

Adjustable, rubberized waist gasket with cord lock minimizes water entry while providing a more secure fit

Supporting the People Who Made This Product

Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labor

Country Of Origin

Made in Thailand.

Weight

431 g (15.2 oz)

Body: 1.5mm 85% Yulex® natural rubber/15% synthetic rubber by polymer content, lined with high-stretch 100% recycled nylon jersey

Exterior: 83% recycled nylon/17% spandex

Natural rubber is from sources that are Forest Stewardship Council® certified by Preferred by Nature™

Made in a Fair Trade Certified™ factory

Care Instructions: Hand Wash, Do Not Bleach, Drip Dry, Do Not Iron, Do Not Dry Clean

$230.00