7'6"

This is a wolf in sheep’s clothing. This is a funboard on steroids: on paper it’s a funboard and if you’re looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it’s perfect for you. But in the hands of a seasoned surfer it’ll come alive.

Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us “I was smiling so much I got sunburnt teeth!”.

• 6'6 x 21 3/4 x 2 3/4 (43.5L)
• 6'10 x 22 1/2 x 2 7/8 (49.1L)
• 7'2 x 22 3/4 x 3" (53.7L)
• 7'6 x 23 x 3 (57.5L)

ACT:

Torq ACT surfboards are the world’s first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin.

On any surfboard the resin’s function is to hold the fiber in place. It offers little structural integrity of it’s own, little flex and little impact strength. As a material without the fiber it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight.

With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight.

The Huevo, in SLX construction, is a classic hybrid surfboard that incorporates the best of both the shortboard and longboard. It’s round nose and fuller tail gives plenty of floatation and makes paddling a breeze. With its shorter length and 2 + 1 fin set up makes for fast responsive turns and manoeuvrability.

OUTLINE: Its fuller outline with the wide point slightly forward of centre means you can trim and glide forward on the board, adds to the great paddle power and to the stability and flow, while its round tail makes for smoother transitions between turns.

ROCKER: With emphasis on being an all rounder it has a low to medium rocker, this is why you will find this board paddles with ease and flows through those dead sections with minimal effort. A slight lift in the nose makes those late take offs easier and the slight lift in the tail makes for nice drive through your turns.

CONTOURS: A nice classic slight rolled Vee from nose to tail makes it effortless for those rail to rail transitions, while the stance is anywhere on the board, however getting back over the fins the board will turn on a dime.

PERFORMANCE: Think summer grovely beach breaks when you don’t want a Longboard or it’s too small for your Shortboard or winter reefs and perfect points. This board can handle anything from waist to double overhead and any ability from beginner to advance. Enjoy

SPECIFICATIONS

NOTE: rider weight is based on board volume and intermediate rider skill level.

TECHNICAL INFORMATION

Construction SLX Epoxy Construction

SLX construction produces a controlled flex pattern by combining the versatility of epoxy materials with the added advantage of reduced weight. All SLX boards have an EPS core with a high-grade timber stringer, which is laminated by hand using epoxy resign, biaxial fiberglass and a specialized construction process.Featuring a high strength-to-weigh ratio, and designs CNC milled directly from the shapers files. SLX boards feel light, responsive and are very sensitive under your feet. These boards are extremely versatile, easy to ride, and can be used in wide variety of conditions.

Board Contours Vee Concave

Rail Neutral Rail

Wave Height 1-8ft Waves

Surfer Skill Level Beginner, Intermediate, Advanced

Torq Tec Rusty Egg Not - White

Simply put, the Egg Not is a squash tail version of our mid-length board, the eGG. With the increasing popularity of mid-lengths, we decided it was more or less a given that we offer a squash tail mid-length board. The Squash tail adds a little more area, lengthens the rail line, and has a more pivoty feel compared to a roundtail. The Egg Not is a great board to have in your quiver. When the surf is average, you’ll have plenty of wave catching ability and it will carry through sections but the board will still be loose enough to turn with ease. As a plus, when the surf gets a bit bigger, it still works surprisingly well! The Egg Not features a relaxed rocker on the front end of the board which helps with paddle speed, wave catching, and overall glide. The curve is a bit above average which translates to helping tighten the arc of your turns without giving up speed. The thickness of the board is a little on the thin side for a board this size. These leaner rails make the board easier to put in the water and also helps it hold better in bigger surf. Fin setup here is your call. For a higher performance feel we recommend a 4-fin setup. If you’re looking for something a little cruisier or more traditional feel do a 2 plus one setup.

TEC - TORQ EPOXY COMPOSITE

Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.

The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.

The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.

The Mini Magic Dual-Core is a scaled down version of Walden's famous Magic Model. This is a good choice for a smaller surfer, people who are transitioning from a shortboard to a longboard or vice versa - longboarders wanting to go shorter while still maintaining some volume and float. The Dual-Core gives the Mini Magic the best of both style of constructions with PolyUrethane on the rails and EPS in the Center. The PU foam is laminated to the EPS with a TPU material which provides more pop and response.
Like the bigger Magic Model the hull has a unique design, the front 1/2 of the hull is concave, this single concave transitions into a double concave in the rear 1/3 and ends towards the tail that has a moderate “V”. The rails are hard. The concave nose adds lift and stability, perfect for nose riding. The double concaved hull and hard rails make the board fast, stabile, responsive and maneuverable in all conditions. This board performs as well as slow surf as it does on speedy beach breaks. The Mini Magic maneuvers well out of turns while maintaining a forgiving nature, and is an excellent nose rider too.

***Fins Not Included