- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- Fcs2 Performer Glass Flex Tri
Fcs2 Performer Glass Flex Tri
Fcs2 Performer Glass Flex Tri
Reliable all-round fin for a diverse range of surfers, conditions and board types.
Well proportioned template with Inside Foil Technology (IFT) delivering a balance of drive, pivot and hold.
Designed for surfers wanting a combination of speed and maneuverability with flow between turn
Ideal Conditions.
A wide range of conditions from beach breaks to point breaks.
Board Types.
Recommended for all board types.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
Fin Specs.
Base: 4.25" / 108mm
Depth: 4.43" / 112mm
Area: 14.03"2 / 9054mm2
Sweep: 33.7o
Foil: Inside
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg
BASE ” | BASE MM | DEPTH ” | DEPTH MM | AREA ” | AREA MM | SWEEP DEGREE | FOIL | |
Performer X-S | 4.13 | 105 | 4.3 | 109 | 13.26 | 8554 | 33.7 | IFT |
Performer SML | 4.25 | 108 | 4.43 | 112 | 14.03 | 9054 | 33.7 | IFT |
Performer MED | 4.37 | 111 | 4.55 | 115 | 14.81 | 9554 | 33.7 | IFT |
Performer LRG | 4.48 | 114 | 4.67 | 118 | 15.58 | 10054 | 33.7 | IFT |
Performer X-LGE | 4.59 | 117 | 4.78 | 121 | 16.36 | 10554 | 33.7 | IFT |
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Julian Wilson's updated signature fin. Speed and projection for taking flight and progressive surfing.
OVERVIEW
Made from super responsive Performance Glass material, Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS 2 Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL
PERFORMANCE GLASS
FIN SIZE
GROM (Blue Stripe)
Base: 4.10" / 104mm
Depth: 4.19" / 107mm
Area: 12.81"² / 8264 mm²
Sweep: 35.8°
Foil - Side Fins: 80/20
Foil - Centre Fin: 5/50Was:$199.00Now:$100.00Price:$100.00 -
Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.
Overview
Mick's fin in premium pc material delivers a dynamic, yet very controlled feel when performing powerful turns.
Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
This fin provides maximum drive and control.Ideal conditions
Open face, down-the-line waves, particularly good in point and reef breaks.Board types
Designed to fit the fcs ii fin system.
Recommended for performance shortboards with moderate-to-extreme rocker.Fin family
Carver: find power. Powerful, drawn-out turns with added hold.$139.95 -
Speed âÂÂÂÂÂÂ& tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
Speed, flow and response with added control. Excels in critical conditions.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for a balance of speed, flow & response with added control.
- Oversized, all-round template with a fuller tip.
- Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Safe, durable and ideal for learners.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
$99.00 -
FCS 2 AM Twin +1 Performance Core Extra Large
Al Merrick Twin fin with mini stabiliser. Lowest area twin set in the FCS range.
Overview
- Lowest area twin set in the FCS range.
- The low sweep (rake) and narrow tip means these fins pivot and release exceptionally well, while maintaining incredible trim speed and the ability to quickly break into a turn.
- Mini stabiliser has a narrow, elongated template with a rounded tip to add control when driving through turns.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
$209.00 -
Fcs2 Carver Perfomance Glass Quad Side Small
Side byte set designed for 2+1 setups on longboards and SUP's.
- Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up.
- Neutral, well balanced template.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP's or as shortboard quad rears.
$129.00 -
Fcs2 Mick Fanning PG Twin+1
NEW RELEASE: Mick Fanning's specialty twin takes aspects of the revolutionary H4 and Mick's wildly popular signature thruster to combine into a highly tuned twin form, built for speed and control.
Overview
- Developed in collaboration with Mick Fanning, this twin plus 1 is focused on speed, power, and control.
- Born from the H4 template, the hatchet-like tip produces instantaneous acceleration from take-off to bottom turn and creates a feeling of stability when pushing through turns
- The wide, thick base is tuned for rigidity & maximum driving power, combined with a smaller stabiliser fin that mimics the side fin template and serves to control the set
- Foil: With a focus on speed, the contemporary foils on the side fins significantly reduces drag and introduces flex in the upper half of the fin precisely where it’s needed.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM molding process making it much lighter while allowing total manipulation of the flex.
X-LARGE (One size suits all)
$229.00 -
Fcs2 JS Power Twin Fin
High area twin fin set designed to be pushed hard through turns
Overview
- Limited Edition fin designed to compliment the JS Industries Black Baron Twin.
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$189.00 -
FCS II Al Merrick PC Tri Fin Set - Yellow
Al Merrick's 'AM' Performance Core shaper fin. Raked side fins produce exceptional speed and drive.
Overview
Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large templates offer quick release through turns.
Ideal Conditions
Hollow steep waves, punchy beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.26 108.1 4.26 108.0 13.02 8400 35.5° Flat SML 4.37 111.0 4.37 111.0 13.71 8846 35.5° Flat MED (Side) 4.57 116.0 4.53 115.0 14.89 9608 36.6° Flat MED (Ctr) 4.33 110.0 4.41 112.0 13.72 8852 35.0° Flat LRG (side) 4.61 117.1 4.69 119.0 15.63 10083 36.3° Flat LRG (Ctr) 4.47 113.5 4.45 113.0 14.68 9469 38.6° 50/50 $209.00 -
FCSII Mick Fanning Tri Fit Set - Black/Mango
Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.
Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.This fin provides maximum drive.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
GROM 4.04 102.6 4.20 106.6 12.73 8215 35.8 Flat/Bev MED 4.33 110 4.48 114 14.52 9369 36.0° Flat/Bev LRG 4.49 114 4.67 119 15.70 10131 36.0° Flat/Bev $209.95 -
FCS II Mid Side Byte Fin Set - Clear
You committed to riding a midlength, so it makes sense to maximise the performance of the board by using a set of fins that allows you to perform to your full potential.
Overview
The 3.6" side bytes are derived from the historic GL template from the late '90s. This template has withstood the test of time and compliments the single by adding response and control when turning.
Surfers wanting a versatile and stable 2 + Box set for their midlength that will encourage smooth flow without restricting manoeuvrability and tighter turns performed higher on the wave.
- Side byte template for Midlengths
- PG Material
Neo Glass
Neo Glass fins are precision moulded using long-strand fibreglass and a marine-grade polymer. Very affordable yet considered a premium construction due to its high fibreglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
3.6" 3.4 87.1 3.6 92 9.3 5990 28.6° Flat View the FCS Fin Data page for Base/Depth/Area/Foil information.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP or as shortboard quad rears.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$119.95