We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom Pro 2.0 integrates our new 3-Point Strap with the 2.0 Sole for precision fit and instant response. We've also upped the warmth even more with our new metal-grid Thermal Rebound plush lining. Simply put, our Custom Pro 2.0 is the best watersports boot in the world. Full stop. Here's why:

3D Molded Natural Rubber Sole

Like all of our new 2.0 Series boots, the 3mm Custom Pro 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.

Custom-Fit 2.0 Thermofoam Sole 

Our patented heat-moldable 2.0 Thermofoam sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.

3-Point Strap with Floating D-Ring

Another Solite innovation, our 3-Point Strap anchors under both the arch and heel on the inside of the foot, and under the heel on the outside of the foot. When the strap is tightened, the boot snugs up evenly under the arch and through the rear of the boot, providing instant response and slop-free fit for all arch and ankle profiles. Our Floating D-Ring on the strap isn't stitched in place, allowing it to "float" naturally to the optimal position on your foot. Our 3-Point Strap is also 100% Tatex-coated for extra durability and zero water absorption. 

Thermal Rebound Lining

The Custom Pro 2.0 features a unique Thermal Rebound plush, quick-dry interior lining material in the upper. This material features a thin, flexible metallic grid-layer between the neoprene and the outer lining, reflecting body heat back to the skin for enhanced warmth. Lab tests on the Thermal Rebound laminate show an increase in insulation exceeding 10%, which extends your sessions and increases your odds of getting the wave of the day.

Tatex Flex-Spine

The calf area features our exclusive Tatex Flex-Spine. The Flex-Spine serves three distinct purposes:

1. Enhances durability with an abrasion resistant rubbery surface.
2. Reduces stretch to act like a shoe-horn, making it easier to slide your heel into the boot.
3. Provides a sticky external surface to grab your wetsuit leg and prevent flushing.

EZ-O Cuff with Overkill Seams

Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.

Reinforced Stealth-Loop

To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption. 

Split-Toe Heat-Booster Socks in the Box

The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:

1. Makes boots easier on-off and reduces stress on seams.
2. Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
3. Adds warmth to extend session length and comfort.
4. Absorbs excess water from flushing to prevent puddling in the boots.
5. Absorbs bacteria to reduce bootie-stink.
6. Machine wash and dry for convenience.

Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more. 

FSC II Machado Single Performance Glass 7"

Rob Machado's new 7" single fin provides speed through open sections and pivot in the pocket.

Designed specifically for the rounded template of the Firewire Sunday, this fin will provide speed through the flat and pivot where you need it.
Wide base that gives drive on open sections and a shorter height that makes it easy to maneuver.
Firewire Sunday - Surfed as both a short board or mid-length, Rob Machado template allows long drawn out turns
FCS II Rob Machado Sunday Single side bytes compatible 

Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

Developed and tested to perform in the world’s best waves, these lightweight, slim-fit, high-performance surf trunks are built from 86% recycled polyester/14% spandex fabric with streamlined four-way stretch. The contoured waistband is designed to keep your trunks in place even when the surf’s as heavy as it gets. Outseam is 18". Made in a Fair Trade Certified™ factory.

Specs And Features

• Performance Fit and Hydrolock Waistband System

  Performance fit with a contoured waistband that features an innovative locking system that's designed to move while keeping the trunks in place

• Chafe-Free

  Bonded, forward-set side seams provide low-profile, chafe-free comfort

• Pocket Details

  Streamlined, self-draining right-thigh patch pocket with a zippered closure and a key loop

• Secure Drawcord

  Textured drawcord helps to keep the knot secured and your trunks on in heavier surf

• Mid Length

  These boardshorts have an 18" outseam

• Supporting the People Who Made This Product

  Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labour

• Country of Origin

  Made in Vietnam.

• Weight

  160 g (5.64 oz)

Comfortable, multifunctional go-to shorts with an 8" inseam for any activity and all the moments in between. Made in a Fair Trade Certified™ factory.

Specs and Features

4Play Volatile Bodyboard 40"

4Play's Beginner board with all the bells & whistles. This board feels and looks the part with a great price tag. Grab one for this summer! Your 4play experience starts here!

CORE: EPS CORE (Extruded Polyethelene Core)
 EPS Is a lightweight Rigid Core. All EPS boards come with a Leash, Plug & HDPE slick

STRINGER: E Flex Stringer

DECK: 7lb X link Thermo Moulded Deck

SLICK: 3mm HDPE

RAILS: 50/50 Double Rails

ADDITIONAL FEATURES: Channels, Rolled Crescent Tail, nylon Tether Leash & Plug

4Play Volatile Bodyboard 42"

4Play's Beginner board with all the bells & whistles. This board feels and looks the part with a great price tag. Grab one for this summer! Your 4play experience starts here!

CORE: EPS CORE (Extruded Polyethelene Core)
 EPS Is a lightweight Rigid Core. All EPS boards come with a Leash, Plug & HDPE slick

STRINGER: E Flex Stringer

DECK: 7lb X link Thermo Moulded Deck

SLICK: 3mm HDPE

RAILS: 50/50 Double Rails

ADDITIONAL FEATURES: Channels, Rolled Crescent Tail, nylon Tether Leash & Plug

Yeti Rambler Half Gallon Jug - Agave Teal LTD Edition

[1.9 litres]

ALMOST 24 HOURS WORTH OF WATER TO FOLLOW YOU FROM THE GYM TO THE RANCH AND BACK HOME.

With rugged construction, FatLid™ insulation and a stainless-steel handle, the Rambler® Half Gallon Jug is built to take on the wild. Whenever and wherever you need it, count on an ice-cold (or piping hot) sip from your Rambler® Jug to come to the rescue. Like the entire Rambler Family, this reusable jug and its lid are easy to clean and dishwasher safe. Available in stainless and DuraCoat™ colours.

Please note: Do not use the Rambler® Jug Lid with carbonated beverages or for storage of food or perishables.

FATLID™ INSULATION

One inch of lid insulation keeps temperature retention on lock, and the MagCap Dock harnesses the power of magnets to keep your MagCap close by. The stainless steel handle with rubber grip makes for sturdy, easy transport.

18/8 STAINLESS STEEL

Made with kitchen-grade stainless steel, so they’re puncture- and rust-resistant.

DOUBLE-WALL VACUUM INSULATION

Keeps cold drinks cold and hot drinks hot until the last sip.

NO SWEAT DESIGN

Keeps finger dry and free from frostbite

DISHWASHER SAFE

Because no one needs more work to do.

External dimensions

14.9w x 25.7h cm

Empty weight

1.7 kg

Capacity

1.9 litres

FCS II Carver PC Tri Fin Set - Eucalyptus

 

Powerful, drawn-out turns. Excels on open-face waves.

Overview

Designed for powerful, drawn-out turns with added hold.

An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.

Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.

Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fin	Base (inches)	Base (mm)	Depth (inches)	Depth (mm)	Area (inches)	Area  (mm)	Sweep Deg°	Foil
MED	4.47	113	4.54	115	14.96	9650	37	Flat
LRG	4.58	116	4.66	118	15.73	10150	37	Flat
XL	4.69	119	4.77	121	16.51	10650	37	Flat

 

 

 

Patagonia Daily Sweatshirt - Conifer Green

Embrace the basics in our cozy, long-lasting Daily Crewneck Sweatshirt. Whether you’re relaxing at home or getting after it outdoors, this versatile, go-to sweatshirt keeps you warm, comfortable and free to move.

100% Regenerative Organic Certified Cotton French Terry Body Fabric

Made of comfy 100% Regenerative Organic Certified cotton French terry body fabric; the collar, cuffs and hem are made of 98% Regenerative Organic Certified cotton/2% spandex rib knit

Regenerative Organic Certified Cotton

Regenerative Organic Certified cotton is from farms working toward the highest organic standard, which aims to rehabilitate soil, respect animal welfare and improve the lives of farmers; these practices reduce greenhouse gas emissions and could help trap more carbon than conventional agriculture

Easy-Wearing Rib Knit at Neck, Hem and Cuffs

Midweight rib knit material at neck, bottom hem and cuffs is comfy against the skin and holds heat in

Set-In Sleeves

Set-in sleeves provide increased freedom of movement

Patagonia Patch on Left Chest

Patagonia patch is sewn on the left chest

All Genders Sizing

Designed to accommodate most body types, our all genders sizing is most similar to men’s fit; we recommend women purchase one size down in tops and their usual size in bottoms for a better fit

Country of Origin

Made in Peru.

Weight

476 g (16.8 oz)

To get the best fit for our gender-inclusive styles, if you’re usually a men’s size medium, stick with size medium or M. If women’s small is your go-to size, we suggest extra small or XS.

Patagonia Houdini Jacket - Pine Needle Green

The 100% recycled nylon, take-it-anywhere jacket with weather-resistant protection for high-output endeavors. Made in a Fair Trade Certified™ factory. Run, ride, rock, invent—just don’t go without our up-for-anything Patagonia® Men’s Houdini® Jacket, a packable, featherweight windproof shell

4Play Boost Body Board


4Play's Boost model is a great board with all the features for a low price.
Aimed toward the intermediate rider. This board has an all-round versatile template for all conditions.

FEATURES:

PE Core:
The industry standard since day one, extruded 2.4lb Ethafoam Polyethylene offers a medium density core with a softer flex suitable for cooler waters and optimal cushioning properties for riders learning to land their first aerial manoeuvres.

Stringer: 2 x Stringers

Deck: High Density PE (HDPE) Slick

Rails: 60/40 Double Rails

Additional features : Channels, 10lb Backing Foam, Finger Control Pads, Nose and Tail Bumpers; Rolled Crescent Tail

Holds 1 board.

Features
• 5mm closed cell padding
• 600 denier and heat reflective silver poly fabric
• STASH STRAP
• padded carry handle

Fcs2 Julian Wilson Tri Fins - Army Camo

Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.

Overview

• Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
• Updated in PC construction featuring our ultralight AirCore.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

GROM/X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

4Play Boost Body Board 44


4Play's Boost model is a great board with all the features for a low price.
Aimed toward the intermediate rider. This board has an all-round versatile template for all conditions.

FEATURES:

PE Core:
The industry standard since day one, extruded 2.4lb Ethafoam Polyethylene offers a medium density core with a softer flex suitable for cooler waters and optimal cushioning properties for riders learning to land their first aerial manoeuvres.

Stringer: 2 x Stringers

Deck: High Density PE (HDPE) Slick

Rails: 60/40 Double Rails

Additional features : Channels, 10lb Backing Foam, Finger Control Pads, Nose and Tail Bumpers; Rolled Crescent Tail

Rip Curl E Bomb Jacket  1.5Mm Ls  Jacket - Olive

The E-Bomb 1.5mm C Long Sleeve Jacket is a great men's wetsuit jacket with long sleeves, designed to keep the core and upper body warm in cooler waters. Made with our highest quality and full flex neoprene for total ease of movement.

Rip Curl's E-Bomb is their ultimate Super Stretch wetsuit rnage. Inspired by high performance surfing, the E-Bomb provides incredible stretch for flexibility in the water. With 100% E6 neoprene, and torpedo gusset for underarm fit  for paddling and surfing actions.

FEATURES:

• • 100% E6 neoprene

  • Glued and Blind Stitched with stresspoint tape

  • Low profile collar

  • Pull cord waist & lock

  • Board short loop holder