Single fin designed for controlled flowing turns.

OVERVIEW

• Drive hard off the bottom and perform controlled flowing turns.
• Neutral fin with elongated base.
• Provides excess drive and hold for longer turns and trim stability.  
• Suited to a more laid back style of longboarding.
• Designed to be used as a single fin.

THE FCS II TOOL-LESS LONGBOARD SYSTEM

• No need for a plate and screw.
• Ability to adjust your fin position in the box mid surf.
• Easily insert or remove your fin in seconds. No fin key required.
• Designed to be used in most existing Longboard boxes. No new box required.

FIN MATERIAL

PERFORMANCE GLASS

FIN SPECS

FLOW 8"

Base: 6.76" / 172mm 
Depth: 7.99" / 203mm 
Area: 30.96" / 19973mm²
Sweep: 34.8º

FLOW 9"

Base: 7.61" / 193mm 
Depth: 9.01" / 229mm 
Area: 39.18" / 25278mm²
Sweep: 34.8º

FLOW 10"

Base: 8.46" / 215mm 
Depth: 9.99" / 254mm 
Area: 48.37" / 31208mm²
Sweep: 3?4.8º

FLOW 11"

Base: 9.10" / 231mm 
Depth: 10.75" / 273mm 
Area: 56.00" / 36130mm²
Sweep: 34.8º

A balance of speed, flow and response in a variety of conditions. PC-7 fins.

Overview

• A balance of speed, flow and response in a variety of conditions.
• Lightweight performance fin with responsive tip flex and hydrodynamic foil on the side fins.
• Neutral all-round template with Inside Foil Technology (IFT).

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• All board types.
• Will fit the FCS II Fin System when used with grub screws and the FCS Infill Kit.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS II Flow Performance Glass 8.5" Longboard Fin - Sand

Single fin designed for controlled flowing turns.

Overview

• Drive hard off the bottom and perform controlled flowing turns.
• Neutral fin with elongated base.
• Provides excess drive and hold for longer turns and trim stability.
• Suited to a more laid back style of longboarding.
• Designed to be used as a single fin.

Performance Glass

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

• No need for a plate and screw.
• Ability to adjust your fin position in the box mid surf.
• Easily insert or remove your fin in seconds. No fin key required.
• Designed to be used in most existing Longboard boxes. No new box required.

FSC II Machado Single Performance Glass 7"

Rob Machado's new 7" single fin provides speed through open sections and pivot in the pocket.

Designed specifically for the rounded template of the Firewire Sunday, this fin will provide speed through the flat and pivot where you need it.
Wide base that gives drive on open sections and a shorter height that makes it easy to maneuver.
Firewire Sunday - Surfed as both a short board or mid-length, Rob Machado template allows long drawn out turns
FCS II Rob Machado Sunday Single side bytes compatible 

Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

FCS II Connect PG Longboard Fin - Blush

A versatile, high-performancelongboard fin.

Product Overview

Part of our Blush Collection, the Connect fin is a versatile, high-performance longboard fin designed to help surfers link turns and move fluidly up and down the board. Its neutral, well-balanced template makes it suitable for a wide range of longboarding styles and conditions, making it a go-to option for surfers seeking drive, speed, and responsive performance in a single fin setup. The pink/blush aesthetic adds a stylish touch while maintaining top-level performance.

Features & Benefits

• Part of the Blush Collection
  
  
• Neutral, well-balanced template for smooth, predictable turns
  
  
• Versatile design for all longboard models and conditions
  
  
• Offers a combination of drive, speed, and responsiveness
  
  
• Ideal for modern longboarding and linking manoeuvres
• Popular choice for surfers wanting an all-round single fin

Performance Feel

• The Connect fin provides smooth, flowing performance across a variety of longboard styles.
  
  
• Its moderate tip area and graceful curves allow the board to pivot easily while maintaining stability through turns. The template provides drive from the base, helping surfers accelerate through sections while feeling responsive and connected to the board.
  
  
• The result is a fin that feels balanced, lively, and adaptable, perfect for surfers looking to link turns and surf fluidly on any type of wave.

Fin Template: Connect

Versatile, responsive, all-round performance.

The Connect template is designed for modern longboarders who want a single fin that delivers speed, drive, and smooth responsiveness. Its neutral and well-balanced design makes it suitable for all conditions and board types, helping surfers link turns and maximise flow.

Board Compatibility

Designed to fit the FCS II Longboard Fin System.

Material

Performance Glass

• For decades,solid fibreglass finshave been the preferred construction for many of the world’s best surfers.
  
  
• Performance Glass fins areCNC machine-cut from layered sheets of fibreglass and resin, producing highly accurate foils that are thenhand-finished for precision and performance.
  
  
• This construction creates astiff, dependable flex pattern that maintains its integrity even under immense pressure, making PG fins ideal for powerful surfing.
  
  
• The result is a fin that delivers instant response, strong drive, and exceptional control when you push your board to its limits.

Sizing

SMALL - (55Kg - 70Kg / 120 - 155 Lbs)

MEDIUM - (65kg - 80kg / 145 - 175 Lbs)

LARGE - ( 75kg - 90kg / 165 - 200 Lbs)

FCS II Flow III LB Fin - Flux

Product Overview

The Flow fin is a single fin designed for smooth, controlled, flowing turns and classic longboard performance. Inspired by the iconic designs of George Greenough, this refined template suits surfers who prefer a more relaxed, flowing approach to longboarding.

With an elongated base for strong drive and a long curved tip for controlled turning, the Flow fin delivers smooth rail-to-rail transitions while maintaining the trim stability needed for extended nose rides.

Features & Benefits

• Wide base for strong drive and flow
  
  
• Thin tapered tipfor turning sensitivity
  
  
• Higher sweep for longer, drawn-out turns
  
  
• Designed for smooth carving and trim stability
  
  
• Ideal for surfers seeking classic longboard performance

Performance Feel

• The Flow fin is designed for smooth, stylish longboarding with controlled turning arcs.
  
  
• The wide base provides strong drive off the bottom, allowing surfers to generate speed and maintain flow through turns. Its higher sweep and curved outline promote long, drawn-out carving lines, while the thin tapered tip improves sensitivity when transitioning from rail to rail.
  
  
• The result is a fin that feels stable when trimming, responsive during turns, and perfectly suited to flowing longboard lines, while still providing the stability needed for extended nose time.

Fin Template: Flow

Drive, flow, and smooth turning control.

The Flow template is designed for surfers who want a single fin that emphasizes smooth carving turns, trim stability, and classic longboard flow. Its higher sweep and elongated base make it perfect for surfers looking to draw longer lines and maintain fluid style.

Board Compatibility

Compatible with all longboards using the FCS II Longboard Fin System

Material

Performance Glass

• For decades,solid fibreglass finshave been the preferred construction for many of the world’s best surfers.
  
  
• Performance Glass fins areCNC machine-cut from layered sheets of fibreglass and resin, producing highly accurate foils that are thenhand-finished for precision and performance.
  
  
• This construction creates astiff, dependable flex pattern that maintains its integrity even under immense pressure, making PG fins ideal for powerful surfing.
  
  
• The result is a fin that delivers instant response, strong drive, and exceptional control when you push your board to its limits.

Sizing

SMALL (55Kg - 70Kg / 120 - 155 Lbs)

MEDIUM(65kg - 80kg / 145 - 175 Lbs)

LARGE ( 75kg - 90kg / 165 - 200 Lbs)

FCS Connect Screw & Plate LB Fin - Cali Blue

A versatile, high-performance longboard fin.

Product Overview

The Connect fin is a versatile, high-performance longboard fin designed to help surfers link turns and move fluidly up and down the board. Its neutral, well-balanced template makes it suitable for a wide range of longboarding styles and conditions, making it a go-to option for surfers seeking drive, speed, and responsive performance in a single fin setup.

This fin is compatible with 2 + 1 setups and features plate and screw fastening, making installation simple and secure. Its Performance Glass construction ensures durability and consistent flex under powerful turns.

Features & Benefits

• Neutral, well-balanced template for smooth, predictable turns
  
  
• Versatile design for all longboard models and conditions
  
  
• Offers a combination of drive, speed, and responsiveness
  
  
• Helps surfers connect turns and move fluidly up and down the board
  
  
• 2 + 1 compatiblewith plate and screw fastening for secure installation

Performance Feel

• The Connect fin provides smooth, flowing performance across a variety of longboard styles.
  
  
• Its moderate tip area and graceful curves allow the board to pivot easily while maintaining stability through turns. The template provides drive from the base, helping surfers accelerate through sections while feeling responsive and connected to the board.
  
  
• The result is a fin that feels balanced, lively, and adaptable, perfect for surfers looking to link turns and surf fluidly on any type of wave.

Fin Template: Connect

Versatile, responsive, all-round performance.

The Connect template is designed for modern longboarders who want a single fin that delivers speed, drive, and smooth responsiveness. Its neutral and well-balanced design makes it suitable for all conditions and board types, helping surfers link turns and maximise flow.

Board Compatibility

Compatible with all longboards using a Screw & Plate fastening

Material

Performance Glass

• For decades, solid fibreglass finshave been the preferred construction for many of the world’s best surfers.
  
  
• Performance Glass fins areCNC machine-cut from layered sheets of fibreglass and resin, producing highly accurate foils that are thenhand-finished for precision and performance.
  
  
• This construction creates astiff, dependable flex pattern that maintains its integrity even under immense pressure, making PG fins ideal for powerful surfing.
  
  
• The result is a fin that delivers instant response, strong drive, and exceptional control when you push your board to its limits.

Sizing

SMALL  - (55Kg - 70Kg / 120 - 155 Lbs)

MEDIUM - (65kg - 80kg / 145 - 175 Lbs)

LARGE - ( 75kg - 90kg / 165 - 200 Lbs)

FCS Connect Screw & Plate LB Fin - Sunburst

A versatile, high-performance longboard fin.

Product Overview

The Connect fin is a versatile, high-performance longboard fin designed to help surfers link turns and move fluidly up and down the board. Its neutral, well-balanced template makes it suitable for a wide range of longboarding styles and conditions, making it a go-to option for surfers seeking drive, speed, and responsive performance in a single fin setup.

This fin is compatible with 2 + 1 setups and features plate and screw fastening, making installation simple and secure. Its Performance Glass construction ensures durability and consistent flex under powerful turns.

Features & Benefits

• Neutral, well-balanced template for smooth, predictable turns
  
  
• Versatile design for all longboard models and conditions
  
  
• Offers a combination of drive, speed, and responsiveness
  
  
• Helps surfers connect turns and move fluidly up and down the board
  
  
• 2 + 1 compatiblewith plate and screw fastening for secure installation

Performance Feel

• The Connect fin provides smooth, flowing performance across a variety of longboard styles.
  
  
• Its moderate tip area and graceful curves allow the board to pivot easily while maintaining stability through turns. The template provides drive from the base, helping surfers accelerate through sections while feeling responsive and connected to the board.
  
  
• The result is a fin that feels balanced, lively, and adaptable, perfect for surfers looking to link turns and surf fluidly on any type of wave.

Fin Template: Connect

Versatile, responsive, all-round performance.

The Connect template is designed for modern longboarders who want a single fin that delivers speed, drive, and smooth responsiveness. Its neutral and well-balanced design makes it suitable for all conditions and board types, helping surfers link turns and maximise flow.

Board Compatibility

Compatible with all longboards using a Screw & Plate fastening

Material

Performance Glass

• For decades, solid fibreglass finshave been the preferred construction for many of the world’s best surfers.
  
  
• Performance Glass fins areCNC machine-cut from layered sheets of fibreglass and resin, producing highly accurate foils that are thenhand-finished for precision and performance.
  
  
• This construction creates astiff, dependable flex pattern that maintains its integrity even under immense pressure, making PG fins ideal for powerful surfing.
  
  
• The result is a fin that delivers instant response, strong drive, and exceptional control when you push your board to its limits.

Sizing

SMALL  - (55Kg - 70Kg / 120 - 155 Lbs)

MEDIUM - (65kg - 80kg / 145 - 175 Lbs)

LARGE - ( 75kg - 90kg / 165 - 200 Lbs)

FCS Flow III Screw & Plate LB Fin - Burnt Orange

A single fin designed for smooth, controlled, flowing turns.

Product Overview

The Flow fin is a single fin designed for smooth, controlled, flowing turns and classic longboard performance. Inspired by the iconic designs of George Greenough, this refined template suits surfers who prefer a more relaxed, flowing approach to longboarding.

With an elongated base for strong drive and a long curved tip for controlled turning, the Flow fin delivers smooth rail-to-rail transitions while maintaining the trim stability needed for extended nose rides.

Features & Benefits

• Wide base for strong drive and flow
  
  
• Thin tapered tipfor turning sensitivity
  
  
• Higher sweep for longer, drawn-out turns
  
  
• Designed for smooth carving and trim stability
  
  
• Ideal for surfers seeking classic longboard performance

Performance Feel

• The Flow fin is designed for smooth, stylish longboarding with controlled turning arcs.
  
  
• The wide base provides strong drive off the bottom, allowing surfers to generate speed and maintain flow through turns. Its higher sweep and curved outline promote long, drawn-out carving lines, while the thin tapered tip improves sensitivity when transitioning from rail to rail.
  
  
• The result is a fin that feels stable when trimming, responsive during turns, and perfectly suited to flowing longboard lines, while still providing the stability needed for extended nose time.

Fin Template: Flow

Drive, flow, and smooth turning control.

The Flow template is designed for surfers who want a single fin that emphasizes smooth carving turns, trim stability, and classic longboard flow. Its higher sweep and elongated base make it perfect for surfers looking to draw longer lines and maintain fluid style.

Board Compatibility

Compatible with all longboards using the Screw & Plate System

Material

Performance Glass

• For decades,solid fibreglass finshave been the preferred construction for many of the world’s best surfers.
  
  
• Performance Glass fins areCNC machine-cut from layered sheets of fibreglass and resin, producing highly accurate foils that are thenhand-finished for precision and performance.
  
  
• This construction creates astiff, dependable flex pattern that maintains its integrity even under immense pressure, making PG fins ideal for powerful surfing.
  
  
• The result is a fin that delivers instant response, strong drive, and exceptional control when you push your board to its limits.

Sizing

SMALL - (55Kg - 70Kg / 120 - 155 Lbs)

MEDIUM - (65kg - 80kg / 145 - 175 Lbs)

LARGE - ( 75kg - 90kg / 165 - 200 Lbs)

FCS II CONNECT PERFORMANCE GLASS

FCS Classic Funboard Bag - Steel Blue/White

FCS's new Classic Cover. Ultralight and tough; this is the ideal cover for day-to-day use as you transit to and from the beach.

Features

• Internal 20cm tarpee pocket: Hidden storage compartment for your surf equipment
• 5mm PE Foam: perfect protection for day-to-day use.

Marine Grade Zippers: built for strength, durability and resistance to seizing.

FCS Classic Cover Longboard - Alpine

Description

Our new and improved Classic Cover with 5mm padding, a water-resistant 420D ripstop skin, a reversed coil nylon zipper, and nose impact protection. Ultralight and proven durability - now even tougher, the FCS Classic is the ideal cover for day-to-day use.

New to the 25-26 FCS GO-Lite range, is the Alpine colourway, update templates, tougher materials, and the all-new Nose Impact Protection Plate which is used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road.

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features

420D WATER-RESISTANT PU SHELL

• Water-resistant PU-coated inner wall to prevent water ingress or leakage

QUICK STASH SHOULDER STRAP

• Easily and quickly unclip and stash your shoulder strap out of the way

ModuLink SYSTEM CONNECT LOOPS

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

NOSE IMPACT PROTECTION PLATES

• 5mm high-density EVA nose impact protection plate

DURABLE MARINE GRADE ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

5MM FOAM PROTECTION

• PE Foam internal walls for the ultimate protection and insulation

FCS Classic Cover Mid-Length - Slate

Description

Our new and improved Classic Cover with 5mm padding, water-resistant 420D ripstop skin, reversed coil nylon zipper and nose impact protection. Ultralight and proven durability - now even tougher, the FCS Classic is the ideal cover for day-to-day use.

New to the 25-26 FCS GO-Lite range, is the Alpine colourway, update templates, tougher materials, and the all-new Nose Impact Protection Plate which is used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road.

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features

420D PU WATER-RESISTANT SHELL

• Water-resistant PU-coated inner wall to prevent water ingress or leakage

QUICK STASH SHOULDER STRAP

• Easily and quickly unclip and stash your shoulder strap out of the way

ModuLink SYSTEM CONNECT LOOPS

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

NOSE IMPACT PROTECTION PLATES

• 5mm high-density EVA nose impact protection plate

DURABLE MARINE GRADE ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

5MM FOAM PROTECTION

• PE Foam internal walls for the ultimate protection and insulation

Versatile, high performance LB fin for all conditions. Seamlessly connect turns and move up and down the board.

Features.
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.  
Offers a combination of drive, speed and response for modern longboarding.
TURN & CONNECT (Seamlessly connect turns and move up and down the board). 
2 + 1 Compatible.
Suits most LB’s with hard edges.
Designed to be used in existing FCS Longboard boxes. No new box required.

Fin Material.
Performance glass.

Specs.
CONNECT 6"
Base: 4.27" / 108mm 
Depth: 6.00" / 152mm 
Area: 17.65" / 11390mm²
Sweep: 33.7º
Foil: 50/50

CONNECT 7"
Base: 4.99" / 126mm 
Depth: 7.01" / 178mm 
Area: 24.05" / 15518mm²
Sweep: 33.7º
Foil: 50/50

CONNECT 8"
Base: 5.64" / 143mm 
Depth: 7.96" / 202mm 
Area: 30.71" / 19812mm²
Sweep: 33.7º
Foil: 50/50

CONNECT 9"
Base: 6.43" / 163mm 
Depth: 9.03" / 229mm 
Area: 39.91" / 25748mm²
Sweep: 33.7º
Foil: 50/50

CONNECT 10"
Base: 7.13" / 181mm 
Depth: 10.01" / 254mm 
Area: 49.06" / 31653mm²
Sweep: 33.7º
Foil: 50/50

Fcs2 Carver Performance Core Tri Fins - Acid Black

Powerful, drawn-out turns. Excels on open face waves.

Overview

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS II Christenson Longboard Fin

Overview

The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.

Design

Performance Glass

• Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

• No need for a plate and screw.
  
  
• Ability to adjust your fin position in the box mid surf.
  
  
• Easily insert or remove your fin in seconds. No fin key required.
  
  
• Designed to be used in most existing Longboard boxes. No new box required.

Sizing

FCS II Skindog PC 7" Fin

Overview

Ben Skinner’s Signature Longboard template

Complimenting his highly technical Thunderbolt range the template offers a balance of drive and hold, enabling enough pivot to execute tight turns and more radical manoeuvres.

Recommended for single fins and mid-lengths. Combine with Skindog side bytes for added performance & control in powerful surf.

Performance Glass

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

• No need for a plate and screw.
• Ability to adjust your fin position in the box mid surf.
• Easily insert or remove your fin in seconds. No fin key required.
• Designed to be used in most existing Longboard boxes. No new box required.

Fcs2 Reactor PC Tri Fins - Charcoal/Black

FCS II Accelerator PC Tri Fin Set

FCS II Carver PC Tri Fin Set - Eucalyptus

 

Powerful, drawn-out turns. Excels on open-face waves.

Overview

Designed for powerful, drawn-out turns with added hold.

An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.

Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

Designed to fit the FCS II Fin System.

Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fin	Base (inches)	Base (mm)	Depth (inches)	Depth (mm)	Area (inches)	Area  (mm)	Sweep Deg°	Foil
MED	4.47	113	4.54	115	14.96	9650	37	Flat
LRG	4.58	116	4.66	118	15.73	10150	37	Flat
XL	4.69	119	4.77	121	16.51	10650	37	Flat

 

 

 

Speed ​& tight turns. Ideal for beach breaks.

Overview

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS II HATCHET PG LONGBOARD FIN

FCS2 Kelia Moniz PG Longboard Fin 9.75"

FCS II Performer PC Tri Fin Set - Mango

Balance of speed, flow and response. Suitable for all conditions. 

Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions
A wide range of conditions from beach breaks to point breaks.

Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.

Fin Family
Performer: Find Balance. A balance of speed, flow & response

Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

FCS II Performer Performance Core Tri Fin Set - Tranquil Blue

Balance of speed, flow and response. Suitable for all conditions. 

Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions
A wide range of conditions from beach breaks to point breaks.

Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.

Fin Family
Performer: Find Balance. A balance of speed, flow & response

Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

FCS II Reactor PC Tri Fin Set - Charcoal/Black

FCS Classic Cover Mid-Length - Alpine

Description

Our new and improved Classic Cover with 5mm padding, water-resistant 420D ripstop skin, reversed coil nylon zipper and nose impact protection. Ultralight and proven durability - now even tougher, the FCS Classic is the ideal cover for day-to-day use.

New to the 25-26 FCS GO-Lite range, is the Alpine colourway, update templates, tougher materials, and the all-new Nose Impact Protection Plate which is used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road.

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features

420D PU WATER-RESISTANT SHELL

• Water-resistant PU-coated inner wall to prevent water ingress or leakage

QUICK STASH SHOULDER STRAP

• Easily and quickly unclip and stash your shoulder strap out of the way

ModuLink SYSTEM CONNECT LOOPS

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

NOSE IMPACT PROTECTION PLATES

• 5mm high-density EVA nose impact protection plate

DURABLE MARINE GRADE ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

5MM FOAM PROTECTION

• PE Foam internal walls for the ultimate protection and insulation

Fcs2 Thomas Bexon Signature Fin - Volan

 Thomas Bexon's new signature single fin holds the perfect amount of release and drive.

Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.

FCS2 Kelia Moniz Longboard Fin 9.75"

Fcs2 Julian Wilson Tri Fins - Army Camo

Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.

Overview

• Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
• Updated in PC construction featuring our ultralight AirCore.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

GROM/X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS II Thomas Longboard Fin - Flame

FCS Day Runner Shortboard Cover - Alpine

Description

Our new and improved Day Runner is fitted with Nose Impact Protection and 5mm padded panels to make it even tougher. Ultralight and proven durability with waterproof 600D ripstop skin, this is the ideal cover for day-to-day use and perfect for weekend strike missions. The shoulder strap quickly stashes away so you can check it in, tie it to the roof, or connect it to you luggage in seconds.

New to the 25-26 FCS GO-Lite cover range is the Alpine colourway, updated templates, tougher materials, and the all-new nose and tail Impact Zones, which are used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road.

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features

600D WATERPROOF PRC

• Our anti-abrasion PRC-coated ripstop prevents water ingress and last longer

ROLL & STOW SYSTEM

• A compact storage solution, easily and quickly roll & stow your Day Runner

ModuLink SYSTEM

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

IMPACT PROTECTION PLATE

• 5mm high-density EVA nose impact protection plate

DURABLE ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

7MM FOAM CONSTRUCTION

• PE Foam internal walls for the ultimate protection and insulation

COMPATIBILITY

• All Travel Covers - Modulink Stack System

FCS Day Runner Shortboard Cover - Slate

Description

Our new and improved Day Runner is fitted with Nose Impact Protection and 5mm padded panels to make it even tougher. Ultralight and proven durability with waterproof 600D ripstop skin, this is the ideal cover for day-to-day use and perfect for weekend strike missions. The shoulder strap quickly stashes away so you can check it in, tie it to the roof, or connect it to you luggage in seconds.

New to the 25-26 FCS GO-Lite cover range is the Alpine colourway, updated templates, tougher materials, and the all-new nose and tail Impact Zones, which are used throughout the range.

ModuLink System

Stack and connect any GO-Light board cover to your travel Wheely cover. The perfect hack to save on extra luggage fees by checking two covers through as one. Also great for locking your roof rack board stack together for a safer trip on extended missions on the road.

FCS GO-Light

Adventure gear you can rely on. With unrivalled durability and a compact, lightweight design, these products are built to protect you and your equipment in the toughest conditions.

Features

600D WATERPROOF PRC

• Our anti-abrasion PRC-coated ripstop prevents water ingress and last longer

ROLL & STOW SYSTEM

• A compact storage solution, easily and quickly roll & stow your Day Runner

ModuLink SYSTEM

• Compatible with all FCS GO-Light Travel Covers - stack & GO!

IMPACT PROTECTION PLATE

• 5mm high-density EVA nose impact protection plate

DURABLE ZIPPERS

• High-grade, non-corrosive, and long-lasting zippers you can trust

7MM FOAM CONSTRUCTION

• PE Foam internal walls for the ultimate protection and insulation

COMPATIBILITY

• All Travel Covers - Modulink Stack System

Speed & tight turns. Ideal for beach breaks.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

Speed, flow and response with added control. Excels in critical conditions.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for a balance of speed, flow & response with added control.
• Oversized, all-round template with a fuller tip.
• Ideal for surfers who like to attack the wave and perform aggressive turns.

Ideal Conditions

• A wide range of conditions, particularly good in critical overhead waves.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Accelerator: Find Control. Speed, flow and response with added control.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg

Powerful, drawn-out turns. Excels on open face waves.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fcs2 Al MerricK Performance Core Tri

Al Merrick's 'AM' shaper fin in ultralight AirCore. Raked side fins produce exceptional speed and drive.

Overview

• Al Merrick's template is designed for radical, progressive surfing.
• The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
• Updated PC construction featuring our ultralight AirCore.

Ideal Conditions

• Hollow steep waves, punchy beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Performance boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin. 

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fcs2 Performer Neo Glass Tri-Quad Eco Fins 

FCS2 Sharp Eye Matt Biolos PC Tri Fins 

FCS II Sharpeye PC Medium Tri Fins

Marcio Zouvi's 'Sharp Eye' shaper fin. 

Overview

Marcio Zouvi's 'Sharp Eye' shaper fin. A versatile all-round Performance Core fin with a larger base, ideal for controlled power turns in critical sections.

• Developed in conjunction with Marcio Zouvi from Sharp Eye Surfboards.
• High Performance fin with a larger base, maintains lots of drive with plenty of release off the lip
• Controlled high-speed turns in punchy conditions.
• Suited to performance and hybrid shortboards.

Sharpeye

Beginning his shaping career in the 80's, Marcio Zouvi and his crew have designed board templates for the highest-performing surfers on tour. With a large focus on premium shortboard designs and progressive surfing in mind, Sharp Eye surfboards have become the board of choice for CT surfers like Filipe Toledo, Barron Mamiya and Sally Fitz.

Ideal Conditions

• A wide range of conditions, particularly good in critical overhead waves.
• Performs well in punchy conditions.

Board Types

• Designed to fit the FCS II Fin System.
• For all board types. Best suited to performance and hybrid shortboards.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)

FCS II Accelerator Tri Fin Set - Rust

Powerful control. Maximum Drive. Built for critical waves.

Product Overview

The Performance Glass Essential Series fins combine the proven Accelerator template with traditional solid fibreglass construction, delivering dependable performance when wave power ramps up.

Designed for surfers who like to push hard through turns, the Accelerator template offers a balanced blend of speed, flow, and response with added control, making it ideal for powerful reef breaks and aggressive surfing.

Features & Benefits

• Stiff, responsivePerformance Glass construction
  
  
• Excellent control when surfing powerful waves
  
  
• Oversized template for aggressive turns
  
  
• Strong drive and acceleration through manoeuvres
  
  
• Trusted by advanced and pro-level surfers

Performance Feel

• Performance Glass fins deliver a stiff, highly responsive flex pattern designed for surfers who demand maximum reliability when conditions become powerful.
  
  
• Because they are CNC machine-cut from layers of solid fibreglass, these fins maintain their structural integrity even under immense pressure. This creates a dependable feel that holds strong through powerful bottom turns and critical sections of the wave.
  
  
• PG fins also feature very fast memory recall, meaning the fin rebounds quickly after loading up in a turn. This produces immediate acceleration and strong drive, allowing surfers to generate speed while maintaining control.
  
  
• “PG fins just feel solid underfoot. There's something about this material, which is simply fibreglass and resin, that produces a very smooth and reliable flex when the waves are powerful, and you want to push hard through a turn. PG fins can transform the feel of your board in a positive way.”
  — George Pittar

Fin Template: Accelerator

Control and power for aggressive surfing.

The Accelerator template features anoversized, all-round outline with a fuller tip, delivering added control when pushing hard through powerful sections of the wave.

This design suits surfers who like to attack the wave and perform strong, committed turns, while still maintaining the speed and flow needed for dynamic surfing.

Ideal Conditions: Reef Breaks

Performs particularly well in:

• Reef Breaks
  
  
• Powerful, critical waves
  
  
• A wide range of solid surf conditions

Board Compatibility

Designed to fit the FCS II Fin System.

Recommended for performance shortboards with moderate-to-low rocker

Material

Performance Glass

• For decades,solid fibreglass finshave been the preferred construction for many of the world’s best surfers.
  
  
• Performance Glass fins areCNC machine-cut from layered sheets of fibreglass and resin, producing highly accurate foils that are thenhand-finished for precision and performance.
  
  
• This construction creates astiff, dependable flex pattern that maintains its integrity even under immense pressure, making PG fins ideal for powerful surfing.
  
  
• The result is a fin that deliversinstant response, strong drive, and exceptional control when you push your board to its limits.

Sizing

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)

LARGE(75kg - 90kg / 165 - 200 Lbs)

FCS II Gabriel Medina Tri Fin Set - Black/White

The new signature fin from 3x World Champion, Gabriel Medina.

Product Overview

Developed with 3× World Champion Gabriel Medina, this signature fin set brings a fresh look to the trusted Performer template, tuned with a custom GM flex pattern and a downsized centre fin for faster release through turns.

Medina’s world titles on the World Surf League were built on the reliability and adaptability of the Performer template. This updated version refines that balance by introducing quicker tail release and enhanced responsiveness, while still maintaining the speed, flow, and control the template is known for.

Built using Performance Core + AirCore construction and featuring Inside Foil Technology (IFT), this fin set delivers strong drive, confident grip on the wave face, and smooth momentum through every turn.

Features & Benefits

• Signature Gabriel Medina Performer Template
  
  
• Custom GM flex pattern for responsive performance
  
  
• Downsized centre fin for quicker tail release
  
  
• Performance Core + Aircore constructionfor lightweight versatility
  
  
• Balanced design for speed, flow, and responsiveness

Performance Feel

• This signature set keeps the balanced feel of the Performer family while introducing subtle refinements for high-performance surfing.
  
  
• The downsized centre fin loosens up the tail, allowing for faster pivots and easier release through turns. Meanwhile, the custom GM flex pattern ensures the fins still generate strong drive and maintain control when pushing hard on the rail.
  
  
• The Inside Foil Technology (IFT)—a concave inside face—adds extra grip against the wave face and helps surfers maintain momentum throughout their turning arc, creating smoother transitions and sustained speed.
  
  
• The result is a fin that feels fast, controlled, and highly responsive, especially when surfing progressive or dynamic lines.

Fin Template: Performer

Balanced performance for all-round surfing.

The Performer template is designed to deliver a perfect balance of speed, flow, and response.

This signature version maintains the trusted versatility of the template while adding quicker tail release and performance-driven flex, making it ideal for surfers who want a fin that adapts across different waves and boards.

Ideal Conditions: All Conditions

Performs well across a wide range of waves, including:

• Beach Breaks
  
  
• Point Breaks
  
  
• Reef Breaks
  
  
• Everyday surf conditions

Board Compatibility

Designed to fit the FCS II Fin System.

Recommended for all board types

Material

Performance Core + AirCore

• Performance Core + AirCore fins feature the same RTM construction, with the addition of AirCore technology to further refine the flex pattern. This creates a feel that sits between PC and PC Carbon, delivering a balanced mix of drive, power, and lively release with an added element of explosive flair through turns.

Sizing

MEDIUM: (65kg - 80kg / 145 - 175lbs)

LARGE:(75kg - 90kg / 165 - 200lbs)

X-LARGE:(Over 85kg / Over 190lbs)

FCS II Nathan Florence Tri Fin Set - Red Bolt

Designed in collaboration with Pro Surfer- Nate Florence

Product overview

He's a slab hunter and a big-wave lord, but Nate Florence also surfs the same everyday waves as us. When he does, it's the accelerator templates that he clicks in his boards.

The template is designed for a balance of speed, flow, and response with added control. It's an oversized, all-round template with a fuller tip for surfers who like to attack the wave and perform aggressive turns. Suited to reef breaks and punchy beachies, this fin will hold on those critical turns.

Featuring the Nate Florence bolt that appears on his Big Wave fins, and also on his new signature traction. Dark, stealthy and with a hint of nostalgia in the lightning bolt.

Whether you’re surfing home breaks or pushing the limits on critical sections, this fin delivers speed, flow, and confident control.

"I seriously have just as much fun riding 2-6 waves as I do chasing monster swells and slabs, so this is my go-to template when I'm surfing around home in Hawaii, and my focus is more on performance than survival." - Nate Florence

Features & Benefits

• Designed in collaboration with Nate Florence
  
  
• Solid basefor drive and acceleration
  
  
• Oversized all-round template for everyday waves
  
  
• Fuller tip for control through aggressive turns
  
  
• Ideal for reefs, punchy beach breaks, and a wide range of conditions

Performance Feel

• The Nate Florence Signature Accelerator fin provides a balanced mix of speed, response, and control.
  
  
• The solid base generates strong drive, while the fuller tip ensures stability during critical turns. The oversized template allows surfers to attack the wave confidently, making the fin feel lively, smooth, and predictable even in punchy reef and beach breaks.
  
  
• This is Nate’s go-to everyday fin when performance is the focus, whether surfing 2–6 waves or chasing bigger sets.

Fin Template: Accelerator

Control and power for aggressive surfing.

The Accelerator template features anoversized, all-round outline with a fuller tip, delivering added control when pushing hard through powerful sections of the wave.

This design suits surfers who like to attack the wave and perform strong, committed turns, while still maintaining the speed and flow needed for dynamic surfing.

Ideal Conditions: Reef Break

Performs particularly well in:

• Reef Breaks
  
  
• Powerful, critical waves
  
  
• A wide range of solid surf conditions

Board Compatibility

Designed to fit the FCS II Fin System.

Recommended for performance shortboards with moderate-to-low rocker

Material

Performance Core

• Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

Sizing

SMALL (55Kg - 70Kg / 120 - 155 Lbs)

MEDIUM(65kg - 80kg / 145 - 175 Lbs)

LARGE ( 75kg - 90kg / 165 - 200 Lbs)

FCS II Performer Tri Fin Set - Cali Blue

Product Overview

The Performance Glass Essential Series fins combine the proven Performer template with traditional solid fibreglass construction, delivering dependable performance when the waves become more powerful and critical.

Designed for surfers who want a versatile all-round fin, the Performer template offers the perfect balance of speed, flow, and response, making it suitable for a wide range of boards, conditions, and surfing styles

Features & Benefits

• Stiff, responsivePerformance Glass construction
  
  
• Excellent drive and acceleration through turns
  
  
• Balanced template for speed, flow and manoeuvrability
  
  
• Reliable control in powerful conditions
  
  
• Trusted by advanced and professional surfers

Performance Feel

• Performance Glass fins deliver a stiff and highly responsive flex pattern designed for surfers who push hard through turns.
  
  
• Because they are CNC machine-cut from layers of solid fibreglass, these fins maintain their structural integrity even under extreme pressure. This creates a dependable feel that holds strong when driving through powerful bottom turns or critical sections of the wave.
  
  
• PG fins also feature very fast memory recall, meaning the fin snaps back quickly after loading up in a turn. This produces immediate acceleration and strong drive, allowing surfers to generate speed while maintaining precise control.
  
  
• “PG fins just feel solid underfoot. There's something about this material, which is simply fibreglass and resin, that produces a very smooth and reliable flex when the waves are powerful, and you want to push hard through a turn. PG fins can transform the feel of your board in a positive way.”
  — George Pittar

Fin Template: Performer

Balanced performance for all-round surfing.

The Performer template is designed to deliver a perfect balance of speed, flow, and responsiveness. It’s ideal for surfers who want a versatile fin that performs well across different boards, conditions, and surfing styles.

Ideal Conditions: All Conditions

Performs well across a wide range of waves, including:

• Beach Breaks
  
  
• Point Breaks
  
  
• Everyday surf conditions

Board Compatibility

Designed to fit the FCS II Fin System.

Recommended for all board types.

Material

Performance Glass

• Machine-cut from layers of solid fibreglass, Performance Glass fins share the same flex pattern and material feel as traditional fibreglass fins - a stiff base with subtle, responsive tip flex. Proven durability and clean aesthetics make these a favourite among pro-level surfers, especially where flex integrity needs to hold up under extreme force and conditions. A natural transition fin for surfers moving from fixed fins to the FCS system.

Sizing

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)

LARGE(75kg - 90kg / 165 - 200 Lbs)