FCS Classic Fun Board Sock Stone Blue

Lightweight protection for your board from wax, scratches, dust and UV light.

Ideal for additional protection in travel covers, keeping wax of car seats, or when storing your boards.

 Features

• High quality, thick weave material
• Durable 600D polyester nose protector
• Note: not designed to protect boards during extended travel

FCS2 Seaside Quad is Rob Machado’s first signature FCS II fin template. Designed specifically for his Firewire Seaside model, this semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.

GEOMETRY

This quad set is based on Rob’s signature FCS II RM Keel twin template that’s set for release later in 2019. Essentially, the two keels have converted it into four fins by extracting area from the back of the keel and re-shaping it into a mini trailer fin.

The trailer has a low profile but is robust, while the side fins retain the look of a traditional keel with a narrower profile. Overall, this high-area quad set has soft, smooth curves that directly translate to how it feels in the water.

PERFORMANCE

Designed specifically to compliment Rob’s Seaside Firewire model. Overall this set has lots of surface area offering a trustworthy feel with an underlying level of response and performance.

The side fins produce an abundance of drive and forward acceleration. The small trailer fins (quad rears) allow you to break the line and turn in a tight arc when the wave presents steeper and more critical opportunities.

Ideally suited to smaller, weaker waves, this set is adaptable to many higher volume hybrid surfboard models.

CONSTRUCTION

Performance Glass fins are machine cut from layers of solid fiberglass. These fins are stiff and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

FCS II CI Upright Quad Rear Fin Set - Black 

Overview

Designed by Britt Merrick, the CI Upright Quad Rears are shaped to pair seamlessly with the upright CI side fins. Featuring a neutral-raked template, they deliver a solid balance of control and stability while still allowing for tight, pivot-style turns. The 50/50 foil enhances directional control and confidence, making this set a reliable choice for surfers looking to fine-tune their quad set

Features

• A collaboration with Channel Islands Surfboards, the CI Upright is designed for speed & tight turns
  
  
• A template that comes to life in punchy hollow waves, but also suit conditions where you need that start-up speed to get going.
  
  
• Neutral-raked template developed by Britt Merrick to work with upright CI side fins
  
  
• Provides control and stability, while still allowing for tight pivot turns
  
  
• 50/50 foil provides stability and directional control
  
  
• Quad Rear (2 fins) set

Ideal Conditions

• Hollow steep waves, punchy beach breaks

Board Types

• Designed to fit the FCS II Fin System.
  
  
• Performance boards with relaxed rocker
  
  
• Deisgned for CI performance + hybrid models

Fin Family

• Quad: Carver

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

Sizing:

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)

FCS II CI Upright Quad Rear Fin Set - White 

Overview

Designed by Britt Merrick, the CI Upright Quad Rears are shaped to pair seamlessly with the upright CI side fins. Featuring a neutral-raked template, they deliver a solid balance of control and stability while still allowing for tight, pivot-style turns. The 50/50 foil enhances directional control and confidence, making this set a reliable choice for surfers looking to fine-tune their quad set

Features

• A collaboration with Channel Islands Surfboards, the CI Upright is designed for speed & tight turns
  
  
• A template that comes to life in punchy hollow waves, but also suit conditions where you need that start-up speed to get going.
  
  
• Neutral-raked template developed by Britt Merrick to work with upright CI side fins
  
  
• Provides control and stability, while still allowing for tight pivot turns
  
  
• 50/50 foil provides stability and directional control
  
  
• Quad Rear (2 fins) set

Ideal Conditions

• Hollow steep waves, punchy beach breaks

Board Types

• Designed to fit the FCS II Fin System.
  
  
• Performance boards with relaxed rocker
  
  
• Deisgned for CI performance + hybrid models

Fin Family

• Quad: Carver

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

Sizing:

MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)

FCS Classic Fun Board Bag - Black/Mango

The new FCS Classic Cover. Ultralight and tough; this is the ideal cover for day-to-day use as you transit to and from the beach.

Internal 20cm tarpee pocket: Hidden storage compartment for your surf equipment

5mm PE Foam: perfect protection for day-to-day use.

Marine Grade Zippers: built for strength, durability and resistance to seizing.

* Based on average board thickness to width ratio

  Max number of boards: One

FCS Classic Fun Board Bag - Tranquil Blue

The new FCS Classic Cover. Ultralight and tough; this is the ideal cover for day-to-day use as you transit to and from the beach.

Internal 20cm tarpee pocket: Hidden storage compartment for your surf equipment

5mm PE Foam: perfect protection for day-to-day use.

Marine Grade Zippers: built for strength, durability and resistance to seizing.

* Based on average board thickness to width ratio

  Max number of boards: One

A stronger, more reliable tie down system.

Overview

The FCS D-Ring tie down system is the more reliable soft rack system way for your boards. No moving parts means no chance of mechanical failure. Built for the hardcore surfer and adventurer.

Features

• Fits 1-3 boards to most cars, vans, 4WD's without roof racks
• Aerodynamic, non rolling pads featuring high density foam shield. Each pad 440mm width
• Heavy duty 32mm webbing and 1000D fabric foam covering
• Tough die-cast metal buckles with numbered "how to" steps
• Comes with convenient storage pouch

Fcs2 Performer Neo Glass Eco Tri Fins

Fcs2 Reactor Neo Glass Tri Evo Fin

The ideal fin for surfers who like to perform fast, progressive turns. Best suited to hollow waves, and particularly good for beach breaks. The Reactors upright template allows for tighter, more acute directional changes. Constructed with 50% glass and bio-resin, the Neo Glass Eco Reactor has a low impact construction with high impact performance that’s recommended for lighter more agile surfers.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.
• Medium Tri (3) Fins

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Size

MEDIUM 

• 65Kg - 80Kg 

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

• Neo Eco

  About Eco Blend
  At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.

  Sustainability & Community
  Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.

FCS II SINGLE FIN

Fcs2 Carver Performance Glass Quad Size - Small

Powerful, drawn-out turns. Excels on open face waves.

OVERVIEW

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and and draw out their turns.
• Two Quad Rear fins.

Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

FIN MATERIAL

PERFORMANCE GLASS

Fin Specs

Base: 3.86 in. 98 mm
Depth: 3.93 in. 100 mm
Area: 11.07 in.² 7140mm²
Sweep: 33.2º
Foil: 50/50

Fcs2 Carver Perfomance Glass Quad Side Small 

Side byte set designed for 2+1 setups on longboards and SUP's.

• Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
• Neutral, well balanced template.

• Glass Flex

  Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.

  Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Suitable for longboards, SUP's or as shortboard quad rears.

FCS II Connect Neo Glass Eco Longboard Fin 9"

FCS II Performer Single Fin

FCS II SINGLE FIN

FCS II Connect PG Longboard Fin

FCS II Connect PG Longboard Fin

FCS2 Single Fin- Paddle Pop

FCS Connect Screw & Plate Longboard Fin - 7'0"

Features:

• Neutral, well balanced template.
  
  
• Versatile, high performance Longboard (LB) fin for all conditions.
  
  
• Offers a combination of drive, speed and response for modern longboarding.
  
  
• Turn and Connect: Seamlessly connect turns and move up and down the board.
  
  
• 2 + 1 Compatible.
  
  
• Plate & screw fastening.

FCS Clique PG Longboard Fin 8"

Versatile, well balanced template. 2+1 setup compatible.

• Versatile, well balanced template.

• Shorter base makes it highly manoeuvrable.

• Slim tip provides a high level of forgiveness out of the turn.  

• Suited to traditional and performance longboards.

• 2 + 1 Compatible.

• Designed to be used in most existing FCS Longboard boxes. No new box required.

Performance Glass

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

• No need for a plate and screw.
• Ability to adjust your fin position in the box mid surf.
• Easily insert or remove your fin in seconds. No fin key required.
• Designed to be used in most existing Longboard boxes. No new box required.

FCS Clique PG Longboard  - Charcoal

Versatile, well balanced template. 2+1 setup compatible.

• Versatile, well balanced template.

• Shorter base makes it highly manoeuvrable.

• Slim tip provides a high level of forgiveness out of the turn.  

• Suited to traditional and performance longboards.

• 2 + 1 Compatible.

• Designed to be used in most existing FCS Longboard boxes. No new box required.

Performance Glass

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

• No need for a plate and screw.
• Ability to adjust your fin position in the box mid surf.
• Easily insert or remove your fin in seconds. No fin key required.
• Designed to be used in most existing Longboard boxes. No new box required.