FCS
FCS Fins were introduced to the Australian market in 1992 and released globally in 1994. The first FCS plug was patented shortly after the global release and it quickly became the world standard for removable fins. To this day FCS is the strongest, most successful, and also the most widely used fin system in the world. Designed in collaboration with the world's leading surf athletes and surfboard shapers, the FCS fin range offers a diverse range of surfboard fins suited to a variety of board models, wave conditions and surfing style. As well as fins the also make Board Bag Covers, Leashes and Traction Pads.
-
Fcs2 Accelerator Perfomance Core Tri Fins
Speed, flow and response with added control. Excels in critical conditions.
Overview
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
Size
MEDIUM 65Kg - 80Kg
$174.00 -
FCS Classic Funboard Bag - Steel Blue/White
FCS's new Classic Cover. Ultralight and tough; this is the ideal cover for day-to-day use as you transit to and from the beach.
Features
- Internal 20cm tarpee pocket: Hidden storage compartment for your surf equipment
- 5mm PE Foam: perfect protection for day-to-day use.
Marine Grade Zippers: built for strength, durability and resistance to seizing.
Cover Size Max âBoard Length* Max Board Width* Cover Weight 6'0" 6'1" 21 1/2" / 546mm 1.1kg 6'3" 6'4" 21 3/4" / 555mm 1.3kg 6'7" 6'8" 22 1/4" / 564mm 1.5kg 7'0" 7'1" 22 1/2" / 572mm 1.7kg 7'6" 7'7" 2â3" / 582mm 1.9kg 8'0" 8'1" 2â4" / 610mm 2.1kg $174.00 -
Versatile, high performance LB fin for all conditions. Seamlessly connect turns and move up and down the board.
Features.
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
TURN & CONNECT (Seamlessly connect turns and move up and down the board).
2 + 1 Compatible.
Suits most LB’s with hard edges.
Designed to be used in existing FCS Longboard boxes. No new box required.Fin Material.
Performance glass.Specs.
CONNECT 6"
Base: 4.27" / 108mm
Depth: 6.00" / 152mm
Area: 17.65" / 11390mm²
Sweep: 33.7º
Foil: 50/50CONNECT 7"
Base: 4.99" / 126mm
Depth: 7.01" / 178mm
Area: 24.05" / 15518mm²
Sweep: 33.7º
Foil: 50/50CONNECT 8"
Base: 5.64" / 143mm
Depth: 7.96" / 202mm
Area: 30.71" / 19812mm²
Sweep: 33.7º
Foil: 50/50CONNECT 9"
Base: 6.43" / 163mm
Depth: 9.03" / 229mm
Area: 39.91" / 25748mm²
Sweep: 33.7º
Foil: 50/50CONNECT 10"
Base: 7.13" / 181mm
Depth: 10.01" / 254mm
Area: 49.06" / 31653mm²
Sweep: 33.7º
Foil: 50/50$179.00 -
Performance glass (pg) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS 2 tool-less longboard system.
No need for a plate and screw.
Ability to adjust your fin position in the box mid surf.
Easily insert or remove your fin in seconds. No fin key required.
Designed to be used in most existing longboard boxes. No new box required.Overview
Pivot in the pocket, lock the rail on the wave face and run the nose.
Upright fin with minimal sweep and base.
loose fin for performing tighter turns.
bigger sizes ideal for logs and nose riding (9" + 10")
2 + 1 compatible.
Designed to be used in most existing fcs longboard boxes. No new box required.$149.00 -
High fin area makes for exceptional hold. Designed for nose riding and heavy footed turns.
Overview
High area and depth makes for exceptional hold.
Designed for nose riding and heavy footed pivot turns.
âÂÂÂÂIdeal for heavy logs and specialist nose riders.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.00 -
FCS2 Performer Performance Core Tri - Teal Black
Balance of speed, flow and response. Suitable for all conditions.Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$179.00 -
Fcs2 Carver Performance Core Tri Fins - Acid Black
Powerful, drawn-out turns. Excels on open face waves.
Overview
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
Fcs2 Power Twin Performance Glass Black
High area twin fin set designed to be pushed hard through turns.
Overview
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
- Designed in collaboration with Harley Ingleby for use on his asymmetric twin model.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
$179.00 -
FCS II Christenson Longboard Fin - Black
NEW SEASON COLOUR 23/24
The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.
Overview
The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.00 -
FCS II Skindog PC 7" Fin
Designed in collaboration with UK longboard champion Ben Skinner, this 7-inch upright center fin features ultra-lightweight AirCore construction and is designed as a perfect all-around option.
Overview
Ben Skinner’s Signature Longboard template
Complimenting his highly technical Thunderbolt range the template offers a balance of drive and hold, enabling enough pivot to execute tight turns and more radical manoeuvres.
Recommended for single fins and mid-lengths. Combine with Skindog side bytes for added performance & control in powerful surf.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$179.00 -
Fcs2 Power Twin Performance Glass - Clear
High area twin fin set designed to be pushed hard through turns.
Overview
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
- Designed in collaboration with Harley Ingleby for use on his asymmetric twin model.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$179.00 -
Fcs2 Reactor PC Tri Fins - Charcoal/Black
Speed & tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
FCS II Accelerator PC Tri Fin Set
Speed, flow and response with added control. Excels in critical conditions.
Overview
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.39 111.5 4.58 116.3 15.28 9860 33.7 Flat LRG 4.50 114.3 4.70 119.2 16.06 10360 33.7° Flat $179.00 -
FCS II Carver PC Tri Fin Set - Eucalyptus
Powerful, drawn-out turns. Excels on open-face waves.
Overview
Designed for powerful, drawn-out turns with added hold.
An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.47 113 4.54 115 14.96 9650 37 Flat LRG 4.58 116 4.66 118 15.73 10150 37 Flat XL 4.69 119 4.77 121 16.51 10650 37 Flat $179.00 -
Speed âÂÂÂÂÂÂ& tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
High fin area makes for exceptional hold. Designed for nose riding and heavy footed turns.
Overview
High area and depth makes for exceptional hold.
Designed for nose riding and heavy footed pivot turns.
âÂÂIdeal for heavy logs and specialist nose riders.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$179.95 -
FCS II HATCHET PG LONGBOARD FIN
High fin area makes for exceptional hold. Designed for nose riding and heavy footed turns.
Overview
High area and depth makes for exceptional hold.
Designed for nose riding and heavy footed pivot turns.
âÂÂÂÂÂÂÂÂIdeal for heavy logs and specialist nose riders.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.95 -
FCS2 Kelia Moniz PG Longboard Fin 9.75"
Kelia Moniz's new Longboard Fin. Featuring a classic template, perfect for cruising, driving off the bottom & arching through turns.
Kelia Moniz's Longboard Fin
Being one of the most stylish surfers to ever grace a longboard, it was paramount for us to develop a fin with the Hawaiian World Champ that would allow her total freedom of expression and creativity in the water.
With a nod to George Greenough, this template is a classic well-balanced fin for controlled trimming, driving steadily off the bottom and smooth arching turns.
Made from Performance Glass in a colour pallet personally picked by Sis, this 9.75” fin is suitable for most traditional longboards.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$179.95 -
FCS II Performer PC Tri Fin Set - Mango
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.13 104.8 4.3 109.3 13.26 8554 33.7° IFT SML 4.25 108 4.43 112 14.03 9054 33.7° IFT MED 4.37 111 4.55 115 14.81 9554 33.7° IFT LRG 4.48 113.7 4.67 118 15.58 10054 33.7° IFT XL 4.59 117 4.78 121 16.36 10554 33.7° IFT $179.95 -
FCS II Performer Performance Core Tri Fin Set - Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.13 104.8 4.3 109.3 13.26 8554 33.7° IFT SML 4.25 108 4.43 112 14.03 9054 33.7° IFT MED 4.37 111 4.55 115 14.81 9554 33.7° IFT LRG 4.48 113.7 4.67 118 15.58 10054 33.7° IFT XL 4.59 117 4.78 121 16.36 10554 33.7° IFT $179.95 -
FCS II Reactor PC Tri Fin Set - Charcoal/Black
Speed â& tight turns. Ideal for hollow waves and beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.22 107 4.41 112.0 14.45 9324 32.0° Flat SML Ctr 4.17 105.8 4.3 109.1 13.44 8672 31.0° 50/50 MED Side 4.33 110 4.53 115.0 15.23 9824 32.0 Flat MED Ctr 4.28 108.7 4.41 112.0 14.22 9172 31.0° 50/50 LRG Side 4.44 112.8 4.65 117.9 16.00 10324 32.0° Flat LRG Ctr 4.39 111.4 4.52 114.8 14.99 9672 31.0 50/50 .
$179.95 -
Overview
The FCS Day Fun Board Cover is Ultralight and tough; this is the ideal cover for day-to-day use as you transit to and from the beach.
Features
- Wider Fit: designed for fish and funboard shapes.
- Lightweight: lightweight material to minimise boardbag weight. 30% lighter than previous model.
- 5mm High Density Padding: perfect protection for day-to-day use.
- Contoured Stretch Fit: uses a unique ‘armadillo’ strip that not only provides ventilation, but keeps the bag snug and secure around your board.
- 3D Rail Protection: eliminates seams and provides a continuous layer of high density foam that contours to the shape of the rail.
- Expandable Fin Wing: allows for you to carry your board with or without fins.
- Ergonomic Shoulder Pad: double layered and vented to provide the ultimate in comfort and support.
- Noncorrosive Zippers: built for strength, durability and resistance to seizing.
over Size Max Board Length* Max Board Width* Cover Weight 5'0" 5'1" 21 2/4" / 546mm 1.65kg 5'6" 5'7" 21 2/4" / 546mm 1.8kg 5'9" 5'10" 21 2/4" / 546mm 1.9kg 6'0" 6'1" 22 2/5" / 569mm 1.1kg 6'3" 6'4" 22 2/5" / 569mm 1.2kg 6'7" 6'8" 23 1/9" / 587mm 1.3kg 7'0" 7'1" 23 1/9" / 587mm 1.3kg 7'6" 7'7" 23 1/2" / 596mm 1.5kg 8'0" 8'1" 24 1/2" / 623mm 1.6kg * Based on average board thickness to width ratio.
Max number of boards: One.
$199.00 -
Fcs2 Adriano de Souza Performance Core Tri Fins - Medium
Adriano de Souza's signature fin. Allows for fast, controlled manoeuvres. Smaller centre fin allows for quick release.
Designed for a wide range of conditions, particularly good in critical overhead waves.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.SIDE FIN:
Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"² / 9650 mm²
Sweep: 37°
Foil: FlatCENTRE FIN:
Base: 4.35" / 110mm
Depth: 4.42" / 112mm
Area: 14.20"² / 9160 mm²
Sweep: 37°
Foil: Flat$189.00 -
FCS 2 Modern Keel Performance Glass
Upright keel template designed for traditional fish shapes.
Features
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
$189.00 -
Fcs2 Thomas Bexon Signature Fin - Volan
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.00
